subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 1020)
Lot consisting of hydraulic hammer for jpc excavators (except HT25) + 200 mm bucket + 800 mm bucket Ø25 mm hitch, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-48339-406
SOLMEK BM-800 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 40-90 L/min, Cutting Size 800 mm, Pin Diameter 40 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-48339-59
800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48339-422
WSM Office Container General data • Manufacturer: WSM (Walter Solbach Metallbau GmbH) • Freestanding office/master craftsman container • Glazed side surfaces with entrance door Dimensions • Length: approx. 4.15 m • Width: approx. 3.14 m • Height: approx. 2.72 m Facilities • Entrance door with glass cut-out • Multiple window areas for good lighting conditions • Ceiling lighting available • Sockets and electrical installation available Areas of application • Master's Office • Manufacturing office • Warehouse office • Gatekeeper or reception container • Temporary office unit Condition • Used condition • Signs of wear and tear due to age and use • Sale without contents / without furniture Auction-ID: A1-48257-2115
Skyjack SJ9250 RT Diesel Scissor Lift with 4×4 Drive and Hydraulic Supports. The machine is in a used, age-related condition with rust and paint damage. Engine compartment, hydraulics and controls work completely. Manufacturer: Skyjack Model: SJ9250 RT Type: Diesel Scissor Lift 4×4 all-wheel drive Hydraulic outriggers at all corners Kubota diesel engine installed Coarse RT tires with good tread Platform railing fully in place Control panel with joystick and emergency stop available Hydraulic lines and valve block apparently complete Battery and electrics available Clear traces of use, rust and paint No obvious structural damage to the scissor package visible Operating hours, year of manufacture and serial number not readable Auction-ID: A1-48257-8051
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-48339-235
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-48339-9
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-48339-388
The set includes 2 ramps Can be used open and folded Open load capacity: 250 kg per piece or 500 kg per pair Folded capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Never used Overall dimensions: 1000 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-48339-241
Universal kit for mini excavator with 25mm shaft, consisting of hammer, 200 mm auger, quick release, 200 mm bucket and 800 mm bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 150 kg Auction-ID: A7-48339-404
New office container with insulated panels, size 6 x 2 meters, double window and door. The office will be delivered disassembled on a pallet complete with the entire assembly kit, approximate time for assembly 3 hours Overall dimensions: 6000 x 2000 x 2500 mm Weight: 1000 kg Auction-ID: A7-48339-53
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-48339-107
Hydraulic mowing blade for mini-excavators, cutting length 1500, pressure from 120-180 bar, oil flow rate 20-30 lt/min Overall dimensions: 1500 x 800 x 400 mm Weight: 50 kg Auction-ID: A7-48339-132
Floating mulcher for mini-excavators, universal model for excavators from 12 to 75 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1000 x 800 x 500 mm Weight: 130 kg Auction-ID: A7-48339-89
200 mm bucket for JPC excavators (except HT25), never used Overall dimensions: 200 x 300 x 300 mm Weight: 10 kg Auction-ID: A7-48339-418
Universal quick release kit compatible with Ø25 mm hitch with all JPC excavators (except HT25), kit consisting of quick release, 200 mm bucket and 800 mm bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 90 kg Auction-ID: A7-48339-400
Vibratory roller, diesel engine, double vibratory roller, electric ignition, power steering, water system, never used Overall dimensions: 2000 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-48339-18
Floating flail mower for mini-excavators, universal model for excavators from 12 to 90 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1100 x 800 x 500 mm Weight: 155 kg Auction-ID: A7-48339-221
Floating flail mower for mini-excavators, universal model for excavators from 12 to 90 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1100 x 800 x 500 mm Weight: 155 kg Auction-ID: A7-48339-46
Hydraulic rotary grapple for wood, universal coupler, 800 mm opening for excavators from 700 to 2700 kg Overall dimensions: 400 x 400 x 500 mm Weight: 45 kg Auction-ID: A7-48339-181
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-48339-342
Demolition hammer for mini-excavators, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-48339-14
Manufacturer: Jining Lihua Heavy Industry Machinery Co., Ltd. Model: T360 Year of construction: 2025 Serial number: LH202501080204 New and unused mini track loader Operating hours: 0 h 420 cc petrol engine Motor power: 8.7 kW Net weight: 560 kg Operating weight: 700 kg Compact design for working in confined spaces Hydraulic lift arm with front bucket Robust crawler undercarriage for high traction on different surfaces Several additional hydraulic connections available CE marking available Operation via joystick control Machine is in new condition Ready to use Auction-ID: A1-48257-8018
800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-48339-420
Kit consisting of 2 buckets for excavators: digging bucket 200 mm + flattening bucket 800 mm, Ø25 mm hitch for all jpc excavators from mod ht12 up to mod ht20 Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-48339-393
Lot consisting of hydraulic hammer Ø25 mm attachment for JPC excavators (except HT25) + 200 mm bucket + 800 mm bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-48339-330
970 € 
