used Numerically Controlled Machining Centres for sale

Key data: 650 mm, 650 mm, 680 mm

Heckert CWK 400, Year of construction 2008, Control Siemens 840 D, Travel X/Y/Z 650/650/680 mm, Spindle speed up to 10,000 rpm, HSK A 63, 2-fold pallet, Opm3nm87d9 Tool changer 60 times, Rotary table 400 x 500 mm, Conveyor Suction Belt filter system, Cooling - lubricant preparation Knoll,

Key data: 750 mm, 750 mm, 700 mm

Heckert CWK 500, Bk33y8mc0mu Built in 2003, Control Siemens 840 D, Travel X/Y/Z 800/750/805 mm, 2-fold pallet, Table size 630 x 500 mm, Conveyor Tool changer 60 times, SK 40, Suction Bandpass filter Cooling - lubricant preparation Knoll,

x-travel: 1250 mmy-travel: 910 mmz-travel: 875 mmControl: Siemens type: 840 D size of pallet: 800x800 mmnumbers of pallets: 2 turning speeds: 20-6000 U/mintransmission ratio: 2 Feed: 1-32000 mm/min: 360x1 °turning speeds: 16,5 U/minTable load: 1150 kgspindle taper ISO: 50 Tool changer: 165 Pos.total power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 650 mmz-travel: 680 mmdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 750 mmz-travel: 725 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840DNC-rotary table B-axisautomatic tool changer for 320 toolspallet changing device, 2 pallets 500 mm x 500mmcoolant through spindle device IKZ (80 bar)chip conveyorcoolant deviceTechnische Daten / technical details:X-Weg längs / X-travel longitudinal 750 mmY-Weg senkrecht / Y-travel vertical 750 mmZ-Weg quer / Z-travel cross 725 mmB-Achse / B-axis 360 °Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpmWerkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/minEilgang / rapid feed 60 m/minAntriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kWGewicht der Maschine ca. / weight ca.  ...

Machine Details Stock number 1105-03766 Machine type machining center - vertical Make HEKERT TRAUB Type CSK 300 Year of construction 1996 Control type CNC Control Fanuc OM Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base freely loaded from location Technical details x-travel 400 mm y-travel 300 mm z-travel 400 mm Spindle speeds 8000 rpm Control Fanuc OM Clamping table 500x300 mm Magazine slots 16 pieces Tool holder SK40 Distance working spindle/clamping surface max. 50-450 mm Number of pallets 600 X 300 TABLE Total power requirement 10 kW Machine weight ca. 3.2 t Dimension machine LxWxH 2,4x1,8x2,5 m Transport dimensions 2,45x1,8x2,5 m Information CONTROL FANUC OM 8000 RPM E-cabinet Cooling device

Key data: 700 mm, 650 mm, 600 mm

with CNC control, Fabr. HEIDENHAIN, type: TNC 640, travels: X-axis: 700 mm, Y-axis: 650 mm, Z-axis: 600 mm, swivel range +30 degrees to -115 degrees x +/- 360 degrees, rotary table dimensions 650 x 540 mm, 5-axis simultaneous machining, max. 18,000 rpm, with autom. Tool changer: 65 places + attachment Tool magazine with 180 places with integrated CNC-controlled lifting and rotary stand, tool holder: HSK63 , 3-D infrared measuring probe, laser light barrier, with workpiece loading system, Fabr. INDUMATIC, type: 20-0111 with 24 pallet spaces, IKZ coolant supply, cooling/filter system, Fabr. HEDELIUS, Type: SKM900, Oil Mist Extraction & Chip Conveyor

Key data: 3200 mm, 800 mm, 600 mm

with CNC control, Fabr. HEIDENHAIN, Type: TNC 530i, Travels: X-axis: 3200 mm, Y-axis: 800 mm, Z-axis: 600 mm, with autom. Tool changer: 30-fold, max. tool length: 330 mm, max. tool weight: 10 kg, table clamping dimension: 3220x800 mm, tool holder: SK40, max. 8000 rpm, with IKZ coolant supply and chip conveyor

Key data: 4500 mm, 1000 mm, 750 mm

Machine Details Stock-No. 1105-03946 Type of machine Machining Center - Vertical Make HEDELIUS Type CB 100 Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 4500 mm y-travel 1000 mm Z-Travel 750 mm table-size 5000 X 1000 mm turning speed range 30 - 6000 rpm Tool Magazine: 30x tool taper SK 50 total power requirement 30 kW weight of the machine approx. 30 t dimensions of the machine approx. 6 X 3 X 3 m Additional information with CNC heidenhain TNC 530 automatic toolchanger 30-pockets SA 50 fixable centre wall for double working area design ( X-Axis Two Times 2000 mm ) tool brake control Chip Conveyor coolant attachment

Key data: 3200 mm, 720 mm, 600 mm

Machine Details Stock-No. 1105-03938 Type of machine Machining Center - Vertical Make HEDELIUS Type Cb 70 -3200 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 3200 mm y-travel 720 mm Z-Travel 600 mm table-size 3500 x 750 mm turning speed range 30 - 10000 rpm Tool Magazine: 30x tool taper SK40 total power requirement 30 kW weight of the machine approx. 14 t dimensions of the machine approx. 45.15x 2.6 x 3.0 m Additional information with CNC heidenhain TNC 530 automatic toolchanger 30-pockets SA 40 fixable centre wall for double working area design ( X-Axis Two Times 1500 mm ) tool brake control Chip Conveyor Coolant Attachment CTS nice machine

Key data: 1550 mm, 1000 mm, 770 mm

Control Heidenhain iTNC 530 x-axis 1000 mm / 1550 mm y-axis 1000 mm / 750 mm z-axis 770 mm Spindle speed range 30 – 6000 rpm Tool holder SK 50 Clamping surface of the rigid table 1000 mm x 2100 mm Max. table load 2 t Dimensions of the swivel / swivel table 800 mm x 1000 mm Swivel range / rotary movement of the rotary table +10° to -90° / +- 360° Max. table load of the rotary table 1.2 t Magazine slots 90 Connected load 40 kVA Machine weight 29 t

Key data: 2600 mm, 750 mm, 695 mm

with CNC control, Fabr. HEIDENHAIN, type: ITNC 530, travels: X-axis: 2600 mm, Y-axis: 750 mm, Z-axis: 695 mm, NC rotary table 750 mm with hydraulic clamping, NC-controlled stepless swivel spindle with swivel range -98 degrees to +98 degrees, with autom. Tool changer: 50 tool slots + standby magazine with integrated CNC-controlled mast with 180 tool positions, cone cleaning station, max. 1800 RPM, number of axes: 5, tool holder: HSK A63, 3-D infrared touch probe, with IKZ coolant supply, cooling/filter system, Fabr. HEDELIUS, Type: SKM900, Oil Mist Extraction & Chip Conveyor

Key data: 630 mm, 630 mm, 630 mm

Heller MCI 16 Horizontal Machining Center, Built in 2006, Control Siemens 840 D, Travel X/Y/Z 630/630/630 mm, Tool changer 80 times, Tool holder HSK 63, Spindle speed up to 10,000 rpm, 2-fold pallet 400 x 500 mm, Rotary table 0.001°, IKZ 63 bar, Conveyor Machine weight 11,000 kg,

x-travel: 800 mmy-travel: 800 mmz-travel: 710 mmControl: Heller Unipro 90 total power requirement: 62 kWweight of the machine ca.: 17 tdimensions of the machine ca.: mA Heller MCP-H 250, built in 1999, is for sale. The machine is expected to be available in February 2024 and can be viewed under power.DescriptionHeller MCP H 250Machine number 32-44117Year of construction 1999Control system: Heller Unipro 90Spindle taper: SK50Spindle speed: 45-6000 1/minPallet size: 630x 500 mm Maximum table load (even): 800 daNMax. interference contour workpiece size: 900x1000 mmNC round tablePallet changing deviceTool magazine chain: 52 placesLongitudinal stroke axis X: 800 mmCross stroke axis Z: 710 mmVertical stroke axis Y: 800mmMachine weight: 16200 daNPower requirement: 62 KVAFurnishing:Measuring device for BLUM TC 50Linear scales HeidenhainBKW cooling unit for spindle coolingKnoll coolant system wi ...

Key data: 800 mm, 600 mm, 500 mm

Hermle B 300, Year of construction 2009, Control Heidenhain iTNC 530, Travel X/Y/Z 800/600/500 mm, Spindle speed up to 15,000 rpm, Recording HSK 63, Ww 30 speed, Chip pan, coolant device, rigid clamping table, closed canopy, electr. Handwheel 3D touch probe,

Machine Details Stock-No. 1105-03677 Type of machine Machining Center - Universal Make HERMLE Type C 600 U Year of manufacture 2000 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control TNC 430 Heidenhain Turning Speed Range - Main Spindle 16000 min/-1 Power Capacity - Main Spindle 7 / 9 kW tool taper SK 40 Spindle bearing diameter 70 mm measuring system direct Resolution 0.001 mm table surface area Ø 280 mm table load 250 kg Swivel range +/- 110 ° rotatable 360000° Number of ToolPositions 30 pos. tool diameter 80 (125) mm change-time chip to chip 5.5 sec rapid traverse ( X / Y / Z ) 35 / 35 / 35 m/min Feed Speeds 1 - 30,000 mm/min Feed force 6 kN total power requirement 30 kVA weight of the machine approx. 6.5 t ...

Machine Details Warehouse number 1105-03677 Machine type machining center - Universal HERMLE brand Type C 600 U Year of construction 2003 Control type CNC Control TNC 530 Heidenhain Storage location FRANCE Country of origin Germany Delivery time ON REQUEST Freight base from location Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control TNC 530 Heidenhain Speed range - main spindle 16000 min/-1 Drive power - main spindle 7 / 9 kW Tool holder SK 40 Spindle bearing diameter 70 mm Displacement measuring system direct Resolution 0.001 mm Table clamping surface Ø 280 mm table load 250 kg Swivel range +/- 110 ° rotatable 360000 ° Number of tool positions 30 pos. tool diameter 80 (125) mm Changeover time chip - chip 5.5 sec Rapid traverse ( X / Y / Z ) 35 / 35 / 35 m/min Feed speed 1 - 30,000 mm/min Feed force 6 kN Total power requirement ...

Key data: 600 mm, 450 mm, 450 mm

Hermle C 600 V, Built in 2005, Control Heidenhain iTNC 530, Travel X/Y/Z 600/450/450 mm, Spindle speed up to 16,000 rpm, Recording HSK 63, Ww 30 speed, rigid table 800 x 465 mm, electr. Handwheel 3D touch probe, Heat compensation, coolant device, Chip pan, closed canopy,

Key data: 600 mm, 450 mm, 450 mm

3-Axis CNC Machining Center HERMLE C 600 V Year of construction: 2006 Control: Heidenhain iTNC 530 x-travel: 600 mm Y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 16,000 rpm Table surface: 800 x 450 mm Tool changer: 30 x Switch-on hours: approx. 35,000 h New spindle with motor for 13500 hours)

aschinella details Warehouse number 1105-03398 Machine type machining center - Universal HERMLE brand Type C 800 P Year of construction 1999 Control type CNC Control HEIDENHAIN TNC 430 0 Storage location HAGUENAU Country of origin Germany Delivery time by arrangement Freight base from location Price Technical details x-displacement 800 mm y-way 500 mm z-way 500 mm Control HEIDENHAIN TNC 430 0 Spindle diameter 70 mm Spindle speeds 20 -15,000 rpm Spindle holder ISO 40 0 Tool changing device 30-fold 0 Workpiece weight 250 kg Chip conveyor yes 0 Total power requirement 0 kW Machine weight approx. 8.5 t Space requirement approx. 3,260 x 2,210 x 2,930 m Information WITH CONTROL HEIDENHAIN TNC 430 SPARNEFOERDERER TABLE 850 X 500 2 MALL PALLET CHANGER 180°

Key data: 800 mm, 600 mm, 600 mm

Machine Details Stock-No. 1105-03955 Type of machine Machining Center - Universal Make HERMLE Type C 800 U Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 800 mm y-travel 600 mm Z-Travel 500 mm control TNC 426 HEIDENHAIN turning speeds 15000 1/min taper ISO ISO 40 tool change unit 98 spindle 15 kW Additional information 5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS flush gun, lots of accessories,

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840D Siemensdistance spindle /table: 100 - 500 mmMain spindle:: turning speeds: 8.000 min/-1power capacity - main spindel: 10,5 kWtool taper: HSK 63 spindle diameter in front bearing: 70 mmwork table:: table surface area: 1.000 x 560 mmmax. table load: ca. 1.000 kgTool-Presetter:: number of toolpositions: 30 pos.tool taper: HSK 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgfeeds:: rapid traverse ( X / Y / Z ): 35 m/mintotal power requirement: 31 kVAweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,0 x 3,0 mDocuments: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC Machining Center VerticalHERMLE - C 800 V- Top-Condition !- WITHOUT vices / WITHOUT toolingThe data for this ad was created with ModulM ...

Key data: 800 mm, 600 mm, 500 mm

3-Axis CNC Machining Center Hermle C 800 V Year of construction: 2000 Control: Heidenhain TNC 430 x-travel: 800 mm Y-travel: 600 mm z-travel: 500 mm Spindle: HSK 63 Speed: 8,000 rpm Table surface: 1,000 x 560 mm Tool changer: 30 x Space requirement: approx. 3.5×3.0x3.0 m

Machine Details Stock-No. 1105-03870 Type of machine Machining Center - Universal Make HERMLE Type C 800 V Year of manufacture 1999 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time by arrangement Freight basis ex Works Technical details x-travel 800 mm Y-Travel 500 mm Z-Travel 500 mm control HEIDENHAIN TNC 430 spindle diameter 70 mm spindle turning speed range 20 -12,000 rpm spindle taper ISO 40 0 Tool Change Unit 30-fold 0 Workpiece Weight 250 kg total power requirement 30 kW Weight of the machine approx. 7 t dimensions of the machine approx. 3,260 x 2,210 x 2,930 m Additional information nice machine with chip convoyer and HEIDENHAINTNC 430

Key data: 800 mm, 800 mm, 550 mm

Inv. Num. : 7420 Type: C42U dynamic Producer: Hermle Created: 2020 Parameters: Control system: HEIDENHAIN TNC 640 Duty cycle: 8341 h Hours: 1947 h Work table length: 800 mm Work table width: 630 mm Maximum table load (uniform): 1400 kg Number of synchronized axes: 5 pieces Tool magazine: 42 pieces Maximum vertical spindle speed: 18000 1/min X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 550 mm Cone: HSK-A63 Max. tool weight: 8 kg Spindle cooling: 80 kG/m² Machine weight: 13000 kg Equipment: Conveyor Workpiece probe Renishaw Spindle cooling Tool Holder Tool probe BLUM Oil mist extraction Zero Clamping Plate SCHUNK

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmCNC-control: TNC 430 HEIDENHAINTable dimensions: 540 x 540 x Ø 630 mmmax. table load: 300 kgspindle taper: SK 40 spindle turning speed range: 15.000 U/mindrive capacity - spindle motor: 10,5 kWfeed range: 30.000 mm/minrapid traverse: 30 m/mintool change unit: 30 Pos.coolant: voltage: 400 Vtotal power requirement: 31,0 kVAweight of the machine ca.: 8,0 tdimensions of the machine ca.: 2,85 x 3,45 x 2,70 m- Serial-No.: 11875- Machine ON:- Programm ON:- control: TNC 430 HEIDENHAIN- electrical hand wheel- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC milling machine Hitachi Seiki VK 55 II Machine number: 56008 Year of construction: 1995 Tapping without compensating chuck Clamping table: 1400 x 560 mm Travel X, Y, Z: 1000 x 600 x 600 mm Speed range 60 – 8000 rpm. Position accuracy: +-0.005 mm

x-travel: 610 mmy-travel: 405 mmz-travel: 510 mmtable surface area: 760 x 400 mmspindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/minspindle drive: 7,5 kWmax. torque on the spindle: max. 142 Nmfeeds: 3,0 - 7600 mm/minrapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/mindistance table / vertical spindle: max. 600 mmtable load: 350 kgno. of tools in magazin: 24 workpiece diameter at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6,8 kgcontrol: ULTIMAX SSM total power requirement: 18 kVAweight of the machine ca.: 4,1 tAccessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Control: ULTIMAX 4 Spindle speed: 8000 rpm Travel distances: X-axis: 760 mm Y-axis: 460 mm Z-axis: 610 mm Work table dimensions: 1000 x 500 mm Tool holder: SK 40 Included: DocumentationApprox. Onsite Dimension. (l x w x h): 2,800 x 2,500 x 2,900 mm, weight approx.: 4,500 kg

Key data: 760 mm, 510 mm, 610 mm

For sale Hurco vertical machining center type VMX-30 rental of an Ultimax 4 controller. Table size 1020 x 510 mm. Maximum speed is 10.000 rpm. The machining center has a tool changer with 24 positions, BT-40 spindle holder, cooling by spindle, chip conveyor, etc. All books are available, available at short notice, subject to prior sale. Other data; x-travel: 760 mm Y-travel: 510 mm z-travel: 610 mm Table surface: 1020 x 510 mm Workpiece weight max.: 1000 kg Spindle speeds: 10 - 10,000 rpm Spindle holder ISO: 40 Rapid traverse in X-Y-Z axis: 30/30/20 Feed speed: 1 -10000 mm/min Total power requirement: 18 kW Machine weight approx.: 5 t Approx. space: 4 x 4.2 x 2.8 m

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Description: Control: ULTIMAX 4 Spindle speed max.: 12000 rpm Travels: X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Swivel range Ø 610 mm: A-axis: + 110 / - 30° C-axis: 360° Spindle holder: SK40 Max. Feed rate: 20 m/min Rapid traverse: 30 m/min Cooling lubrication system: Internal cooling (spindle): 20 bar IKZ through spindle Ring cooling around spindle 32-position tool changer (with swivel arm) Attention: Machine is delivered with standard table!  ,Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,600 mm, weight approx.: 14,000 kg

Year: 2011 Travel X-axis: 2032 mm Y-axis: 660 mm Z-axis: 610 mm Spindle speed: 12,000 rpm with internal cooling Power: 18 kW Tool holder: SK 40 40 tool slots Table load: 2,700 kg Machine weight: 18,000 kg Machine hours: 11,417 hrs. Spindle hours: approx. 5,000 hours (maximum) Spindle change in 2020 - Subject to technical errors and prior sale. -

Machine Details Stock-No. 1105-037894 Type of machine milling machining centers - vertical Make HURON Type CX 10 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details X-Travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm total power requirement 9 kW Additional information CNC HEIDENHAIN TNC 426 CHIP CONVOYEUR VERY NICE MACHINE 8000 RPM 20 TOOLS MAGASIN ISO 40

Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER

x-travel: 1800 mmy-travel: 1000 mmz-travel: 550 mmrapid traverse X- and Y-axis: 30 m/minrapid traverse Z-axis: 18 m/mintable-size: 2000 x 1000 mmtable load: 2,5 tspindle speed:: 42000 Upmno. of tools in the magazine: 36 Stückmax. tool diameter: 100 mmmax. tool length: 300 mmmax. workpiece weight: 10 kgpositioning accuracy: X: 0,009 Y/Z 0,007 mmrepeating accuracy: 0,005 mmControl: Siemens total power requirement: 30 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 5,77 x 6,42 x 3,43 mThis product range combines dynamism with precision and enables surfacesfirst-class quality, especially in the 3D production of shapes /Forgings and tools.Key Features:_ Ribbed cast structure with excellent mechanical properties and high Stiffness- Excellent damping of vibrations in demanding cutting processes- Floor anchoring for long-term high geometric stability and precisionEquipment:_ L ...

Machine Details Stock number 1105-03762 Machine type machining center - vertical Brand HURON Type VX 12 Year of construction 2012 Control type CNC Storage location FRANCE Country of origin france Delivery time immediately Freight Base EX WORK Price Technical details x-travel 1220 mm y-travel 600 mm z-travel 610 mm Total power requirement 10/14 kW Machine weight ca. 10 t Information electr. Equipment, coolant equipment, technical documents. CNC SIEMENS 828 D SHOPMILL SPAENEFOERDERER 8000 RPM WITH GETRIBESTUFFE SK 40 MAGAZINE 20 TIMES

Key data: 810 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03984 Type of machine milling machining centers - vertical Make HURON Type VX 8 Year of manufacture 2013 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details X-Travel 820 mm y-travel 510 mm Z-Travel 510 mm total power requirement 10/14 kW weight of the machine approx. 5.3 t Additional information CNC SIEMENS 840 D CHIP CONVOYEUR ctx trought spindle VERYU NICE MACHINE 10000 RPM 20 TOOLS MAGASIN ISO 40 includ 4 axis

x-travel: 800 mmy-travel: 630 mmz-travel: 800 mmControl: Siemens type: 840 D size of pallet: 500x630 mmnumbers of pallets: 8 : 360 °turning speeds: 6000 U/minTable load: 800 kgspindle taper ISO: 50 Tool changer: Pos.chip conveyor: Feed: 1-36000 mm/minCooling through the spindle: 50 bartotal power requirement: kWweight of the machine ca.: 19,5 tdimensions of the machine ca.: 8x7x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1060 mm, 510 mm, 630 mm

For sale: Solid Hyundai-Kia vertical machining center type VX-500. Beautiful, stable machining center, equipped with a Fanuc 21i-MB controller including Manual Guide i dialog area. The movement of the X, Y and Z axes is 1060 x 510 x 630 mm each. The table size is 1,200 x 500 mm. The machine has a maximum speed of 10,000 rpm and has a BT-40 mount. The machine is also equipped with cooling by the spindle, a vertical tool changer with 30 positions, a hinged belt chip conveyor and an oil cooler to cool the spindle!

Year of construction: 2010 Control: NC control PC base Touch control panel Networking Spindle: HSC SK30 Tool changer: 5 fold 5 axes Isel linear guide Parts unit: Harmonic Drive A-axis Omron Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium Plexiglas window on all sides Two large sliding doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -

Machine Details Stock-No. 1105-03900 Type of machine Machining Center - Vertical Make KAFO Type Vmc 106 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1020 mm Y-Travel 600 mm Z-Travel 635 mm CNC-control FANUC - IO table-size 1250 X 600 mm spindle taper ISO 40 spindle turning speed range 10000 rpm spindle drive motor 11 kW tool change unit 24 max. table load 1000 kg throat 510 mm voltage 380 V Rapid speed 12 m/min feed range 1 - 5000 mm/min Weight of the machine approx. 4.6 t dimensions of the machine approx. 3.2 x 2.70 x 2.70 m Accessories instruction book Additional information control: FANUC - O I MC - coolant equipment CHIP CONCOYER 10000 RPM

Key data: 1650 mm, 850 mm, 790 mm

Machine Details Stock-No. 1105-03958 Type of machine Machining Center - Vertical Make kafo Type WMC 1675 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Price Technical details x-travel 1650 mm y-travel 850 mm Z-Travel 790 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1900 X 850 mm table load capacity 1500 kg Spindle motor 15 kW spindle speed: 6000 2 STEEP spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 15M total power requirement 30 KVA weight of the machine approx. 14 t Additional information - In Excellent condition - With machien documents - Rigid taping -fanuc oM

Control: Fanuc-18MI Table size: 3000x1650 mmTable load: 9000 kgNumber of pallets: 1 xMovement X-axis: 3230 mmMovement Y-axis: 2000 mmMovement Z-axis: 700 mmSpindle taper: MAS BT 50 Spindle Speed: 50 - 5200 1/minSpindle motor: 26/22 kWMagazin capacity: 40 Required floor space: 8130x4739 mmHeight: 3800 mmWeight: 25000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc 18i-MB Table size: 3000x2000 mmTable load: 12000 kgNumber of pallets: 1 xMovement X-axis: 3230 mmMovement Y-axis: 2200 mmMovement Z-axis: 700 mmSpindle taper: MAS BT 50 Spindle Speed: 50 - 5200 1/minSpindle motor: 26/22 kWMagazin capacity: 40 Required floor space: 8130x5139 mmHeight: 4000 mmWeight: 29000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine hei ...

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03974 Type of machine Machining Center - Vertical Make KITAMURA Type My center 4 XIF Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Technical details x-travel 1016 mm y-travel 510 mm Z-Travel 510 mm table surface area 1000 X 522 mm turning speeds 20000 rpm Feed 36 m/min Rapid traverse 50 m/min control FANUC 16 IMB workpiece tool changer 40 SPEED tool taper BT 40 Additional information FANUC 16 imb CONTROL Chip Convoyer hp cooland trought the spinel 20000 rpm bt 40

ashin details Bearing number 1105-03250 Machine type Machining Center - Vertical Make KIWA Type Exel center 510 Built in 1988 Control type CNC Warehouse FRANCE Country of origin Taiwan Delivery time from now on Freight base from stock, free truck Technical details x-path 500 mm y-path 410 mm z-way 400 mm Table size 700 x 420 mm Spindle speeds 6000 min1 Rapid speed 15 m/min Tool change device 18 fold Drive power 7.5 kW Tool weight max. 3 kg Tool length max. 200 mm Tool diameter max. 80 mm Information FANUC OM

Machine Details Warehouse number 1105-03587 Machine Type Machining Center - Vertical Make KIWA-pilot technology Type Exel center 510/ cu 10 Year of construction 1990 Control type CNC Storage location FRANCE Country of origin Taiwan Delivery time from now on Freight base from stock, free truck Technical details x-travel 500 mm y-travel 410 mm z-travel 400 mm Table size 700 x 420 mm Spindle speeds 6000 min1 Rapid traverse 15 m/min Tool changing device 18 times Drive power 7.5 kW Tool weight max. 3 kg Tool length max. 200 mm Tool diameter max. 80 mm Information FANUC OM B