milling machines wood used for sale (639)

Winkelanlage Schneider Type: SK-Z3 Milling spindle Diameter 30 mm; motor with 4.8/5.6 kW and 1450/2900 rpm Spindle clamping length 150 mm Tool diameter maximum 200 mm Table size 1150 x 850 mm Extendable table support length 2000 mm Slotted spindle Diameter 40 mm; motor with 4.6 kW and 2830 rpm Spindle clamping length 130 mm Cross-cut saw with carbide-tipped saw blade; Motor 3 kW and 2860 rpm Tenon table Dimensions 780 mm x 330 mm With stop rail, with pneumatic workpiece holder Travel 2000 mm 3 suction connections 1 milling fence with fine adjustment, DBGM SH-System 90/1 from S. Hoomann GmbH with 3-roller feed Dimensions Dimensions 3100 mm x 2000 mm x H 1500 mm Weight 1200 kg Packing Dimension 1 pallet 2000 mm x 2200 mm x H 1500 mm Weight approx. 1000 kg 1 pallet 1200 mm x 800 mm H 1000 mm Weight approx. 200 kg

Tenon cutting and slitting machine Hemag With automatic table feed Type: ZR 351 -Cross-cut saw motor power 2.2 kW Saw blade diameter 420 mm Cutting height maximum 120 mm -Slotted spindle motor power approx. 4 kW Spindle diameter 40 mm, spindle clamping length 180 mm Tool diameter maximum 350 mm Sliding carriage with automatic feed motor 1 kW max. tenon length 145 mm max. slot depth 145 mm max. wood thickness 200 mm max. wood width 400 mm Machine dimensions: L 2200 mm x W 2300 mm x H 1800 mm Weight: 1850 kg

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Grecon finger jointing line, type FL 10, Year of manufacture 2010, For horizontal jointing, 10 cycles/min, With scoring motors at the top and bottom for butt joints, Infeed length 1800 – 6000 mm, Outfeed length 2000 – 13600 mm, Consisting of:, - Chain conveyor, - Tilt hoist, - Single piece feeder, - Dimter 450 cross-cut saw, - Grecon FL-10 finger-jointing line, - Oest non-contact glue application system, - Cycle press with cross-cut saw, - Outfeed with curing station, - Multi-cut saw in continuous operation, - Stacking unit, - Outfeed for wood packages

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmweight: 2 t: ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Swivel spindle milling machine  Table width with carriage 900 mm  Work table 1000 x 550 mm Carriage 1150 x 350 mm Spindle diameter D30 mm Swivel range 90-45 Height adjustment spindle 175 mm Working height spindle 125 mm Max. tool diameter  for profiling D 180 mm for slitting D 250 mm Engine 3 kw / 4 hp Speed. 1400-3500-6000-8000 rpm Weight approx. 400 kg

Table milling machine with extended tables

WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access

cnc machining center with consoles lard  Processing field X 4500 mm Y 1550 mm Z 490 mm Gantry bridge over linear guides and racks running in X and Y max axis speeds X + Y 100 m/min Z 20 m/min

Used machine Swivel spindle milling machine Cologne Milling machine Type: F 45 Technical data: Spindle swivel: Yes -5 / - 45° Height adjustment: electric Swivel adjustment: electric

Router R8, large table, ready for demonstration from the site.

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

Code: 0327 Brand: SCM Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

reus: 8000 min-1 U/minWeight: 5500 kgYear: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mmtravel -x axis: 1035 mmtravel -y axis: 560 mmtravel -z axis: 510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle moulder, spindle moulder-Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table-Drive: 2.0 kW-Milling spindle: Ø 30 mm-Speeds: 3,000 / 6,250 / 9,000 rpm-Cutter: Ø max. 200 mm-Table length: 3600 x 500 mm-Dimensions: 3600/910/H1610 mm-Total weight: 170 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -10x: left -10x: right -Price: complete -Weight: 0.8 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -12x: left -11x: right -Price: complete -Weight: 0.9 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 39 mm -Knife thickness: 2 mm -Radius: 15 mm -Price: complete -Weight: 0.9 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 2.3 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 2.3 kg

Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

End mills, end mills, milling cutters, groove milling cutters, wood milling cutters -Double cutter -Roughing and finishing cutter -4x: cutter Ø 4 x12 mm -7x: cutter Ø 5 x 12 mm -10x: cutter Ø 6 x 14 mm -1x: cutter Ø 8 x 20 mm -5x: milling cutter Ø 10 x 20 mm -4x: cutter Ø 11 x 22 mm -3x: cutter Ø 12 x 22 -Take: Ø 10 mm -Type: M623 -Number: 34 pieces -Sale: only completely -Weight: 3.6 kg

Drill head, drill bit, milling cutter -1x recording drawing with the photos -Mill 5x: Ø 16 x 40 carbide tipped -Cutter 2x: Ø 15 x 40 carbide tipped -Cutter 2x: Ø 14 x 40 carbide tipped -Cutter 2x: Ø 12 x 40 carbide tipped -in wooden box -Dimensions: 250/175/H75 mm -Weight: 2.7 kg