Manufacturer:
(Category: 301)
Arburg 320 C 500-170 (2015) Golden editionWorking hours : 40.167 hClamping force: 50 tScrew diameter : 30 mmClamping force: 500 kNDistance between tie bars: 320 × 320 mmPlaten size (H × V): 446 × 446 mmMinimum mould height: 200 mmMaximum daylight opening: 550 mmEjector stroke: 125 mmScrew diameter: 30 mmMaximum shot volume: 85 cm³Maximum shot weight (PS): 77 gInjection pressure: 2000 barScrew speed max: 400 r/minNozzle stroke: 250 mmNozzle contact pressure: 40.6 kNHeating capacity: 9.4 kWPump drive power: 11 kWTotal installed power: approx. 20.5 kWMachine length: approx. 3.4 mMachine width: approx. 1.4 mMachine height: approx. 2.0 mMachine weight: approx. 2 400 kg2 pumps machine
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...
Wittmann Battenfeld SmartPower 50/100 UNILOG B6 Year: 2015 Weight: 3000KG Wiring diagram No. SP-SHB6P136180-100 Control Voltage: 24 DC V Type of current: 3N Rated voltage: 400 V Rated current: 70 A Max fuse rating: 80A Short circuit current rating SCCR: 10 KA
Wittman Battenfeld HM 80/130 Injection Mounding Machine Year: 2008 Serial No. 129929-100 Weight: 4000KG Wiring Diagram: HMB4E129929-100 Largest MTR FLA: 40 A Control Voltage: 24 DC V Frequency: 50 Hz Type of current: 3N Rated Voltage: 400 V Rated current: 80 A Max fuse rating: 80 A
Key data: 600 kN, 135151 g/PS, 30 mm
Wittmann Battenfeld GmbH SmartPower 60/210 UNILOG B8 Injection Moulding Machine Year of construction: 2018 Serial: 139452-100 Injection unit: 350 screw 30mm Clamping force: 600 kn Theoretical shot volume: 123cm cube Power supply: 34kva Hours: 5065 Shots: 135151 B8 Unilog controller
Injection moulding machine for food and beverages caps
Injection moulding machine for PET preforms
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Clamping Force: 150 ton // Mould Height (Max): 730 mm
Clamping Force: 200 ton
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Injection moulding machine for food and beverages caps
Injection moulding machine for PET preforms
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
Injection moulding machine for PET preforms
Cup printing machines
Clamping Force: 1000 ton // Shot Weight (Max): 6995 g
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
Working hours : 21.447 hClamping force: 125 tonsTie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW
Arburg 470 C 1500-350 (2006)Working hours : only 7.113 hClamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mmApproximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg
This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information.
Injection moulding machine Arburg 470C 2K with Multilift H for sale The machine works and is in good condition. Year of Make: 2006 Pump operating hours: approx. 42,000 h Injection Unit Horizontal 350 (35mm Screw) Injection Unit Vertical 150 (30mm Screw)
Arburg 420 C 1000-250 (2002)Working hours : 115600 hClamping force: 100 tScrew diameter : 30 mmDistance between tie bars : 420 x 420Shot weight : 100 g Machine weight : 3580 kg
Arburg 420 C 1000-250 (2000)Clamping force : 100 tScrew diameter : 30 mmDistance between tie bars : 420 x 420Shot weight : 100 gWorking hours : 134.000 h
Engel Victory 500/110 Power (2004)Working hours : 536.000 hClamping force: 110 tScrew diameter : 25 mmDistance between tie bars : 740 x 680 mmShot weight : 60 g
Innovac GmbH
