Manufacturer:
(Category: 301)
Key data: 5500 mm, 1127 , 70
Screw diameter: 70 mmInjection weight in polystyrene: 1127 gClamping force: 5500 kNScrew diameter: 70 mmStroke volume: 1239 cm³Injection weight in polystyrene: 1127 g/hpInjection pressure: 1,990 barClamping force: 550 tLights Tie bar spacing H x V: 920 x 830 mmTool installation height - min.: 350 mmOpening distance: 750/1300 mmMicroprocessor control: KEBA 2880Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kWTotal connected load: 95.4 kWTotal weight: 21,000 kgTotal size: 7.5 x 2.5 x 2.6 mPayment terms: 100 % before taking over the machine, purely net
Key data: 3200 mm, 972 , 65
Screw diameter: 65 mmInjection weight in polystyrene: 972 gClamping force: 3200 kNScrew diameter: 65 mmStroke volume: 1068 cm³Injection weight in polystyrene: 972 g/hpInjection pressure: 2,120 barClamping force: 320 tLights Tie bar spacing H x V: 680 x 680 mmTool installation height - min.: 250 mmOpening distance: 640 mmMicroprocessor control: ABF0100-KEBA2985, 15" Screen text: german Operating instructions: german FHK interface for robots: Euromap 67 Core pull: -- Without material hopper / Without water battery: -/- Pump drive power: 45 kWTotal connected load: 78 kWTotal weight: 14,000 kgTotal size: 8.0 x 1.9 x 2.4 mPayment terms: 100 % before taking over the machine, net only
Key data: 3200 mm, 287 , 50
Screw diameter: 50 mmInjection weight in polystyrene: 287 gClamping force: 3200 kNScrew diameter: 35 or 50 mmStroke volume: 141 /314 cm³Injection weight in polystyrene: 154 / 287 g/hpInjection pressure: 2,500/1280 barClamping force: 320 tLights Tie bar spacing H x V: 720 x 720 mmTool installation height - min.: 300 mmOpening distance: 600 mmMicroprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machineTotal weight: 14,500 kgTotal size: 6.5 x 2.1 x 2.2 mPayment terms: 100 % before taking over the machine, net only
Key data: 2500 mm, 521 , 55
Screw diameter: 55 mmInjection weight in polystyrene: 521 gClamping force: 2500 kNScrew diameter: 55 mmStroke volume: 570 cm³Injection weight in polystyrene: 521 g/hpInjection pressure: 2,470 barClamping force: 250 tLights Tie bar spacing H x V: 630 x 630 mmTool installation height - min.: 300 mmOpening distance: 550 mmMicroprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machineTotal weight: 14,500 kgTotal size: 6.7 x 2.1 x 2.3 mPayment terms: 100 % before taking over the machine, net only
Key data: 3500 mm, 810 , 60
Screw diameter: 60 mmInjection weight in polystyrene: 810 gClamping force: 3500 kNScrew diameter: 60 mmStroke volume: 891 cm³Injection weight in polystyrene: 810 g/hpInjection pressure: 2,420 barClamping force: 350 tLights Tie bar spacing H x V: 720 x 720 mmTool installation height - min.: 350 mmOpening distance: 730 mmMicroprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kWTotal connected load: 78.1 kWTotal weight: 17,300 kgTotal size: 7.4 x 2.0 x 2.4 mPayment terms: 100 % before taking over the machine, net only
Key data: 4200 mm, 1090 , 70
Screw diameter: 70 mmInjection weight in polystyrene: 1090 gClamping force: 4200 kNScrew diameter: 70 mmStroke volume: 1212 cm³Injection weight in polystyrene: 1090 g/hpInjection pressure: 1,877 barClamping force: 420 tLights Tie bar spacing H x V: 810 x 710 mmTool installation height - min.: 380 mmOpening distance: 710 mmMicroprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kWTotal connected load: 82.4 kWTotal weight: 20,000 kgTotal size: 7.9 x 2.3 x 2.5 mPayment terms: 100 % before taking over the machine, net only
Engel Victory 1350/220 Tech. 2005 holmenlos 1 conveyor belt; 1 core move Engel ES 500 H 200V / 110 HL - 2 F BJ 2001 holmenlos 2 aggregates ; 2 Core moves Engel Victory 500 / 120 Plus 2004 tie-barless handling he / usp ; 1 core move
Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt
Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.
Key data: 3200 kN, 309 g/PS, 50 mm
Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.
1 Geiger LR 16 removal robot Year of manufacture 2004 Travels: x=500 y=1000 z=2600 mm + 2 Geiger MidiLiner 3.0 removal robots Year of construction 2016 Travels: X-axis: 300 mm, Y-axis: 800 mm, Z-axis: 1300 mm The removal robots are in good condition, and immediately available!
Injection moulding machine Demag ergotech 100-400 viva BJ 2001
Key data: 175 kN, 301 g/PS, 50 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.
This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information.
This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.
This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.
This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.
This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us.
This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information.
This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.
This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.
This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.
This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200â500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.
This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.
This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000â¬.
This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information.
This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.
This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.
This CHENDE CJ480M3V was manufactured in 2007. A hydraulic injection moulding machine featuring a tie bar distance of 800 x 770 mm and an opening stroke of 750 mm. It includes 2 core valves, 3 air valves, and an EU 12 for robot connection. Consider the CHENDE CJ480M3V machine we have for sale. Contact us for more information.
This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 Ã 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information.
Complast GmbH
