Manufacturer:
(Category: 301)
Key data: 4 kN, 70 mm
Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG
Key data: 6500 kN, 105 mm
Location is : Latino America !
B&A REF: 9222 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2 MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
B&A REF: 9213 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE: HYDRAULIC
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...
Injection moulding machine for food and beverages caps
Injection moulding machine for PET preforms
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Clamping Force: 150 ton // Mould Height (Max): 730 mm
Clamping Force: 200 ton
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Injection moulding machine for food and beverages caps
Injection moulding machine for PET preforms
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
Injection moulding machine for PET preforms
Clamping Force: 1000 ton // Shot Weight (Max): 6995 g
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Key data: 4000 , 1464 , 80
Screw diameter: 80 mm Injectable volume: 1678 cm3 Injectable weight: 1464 g Injection pressure: 1856 bar Column passage: 800 x 800 mm Opening stroke: 1020 mm
Ref. no.: 18092Manufacturer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 24780 kgFurther information:ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding MachineThis machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.Motor and Hydraulic SystemThe machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cy ...
Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. O ...
injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
