Manufacturer:
(Category: 301)
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
Working hours : 21.447 hClamping force: 125 tonsTie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW
Arburg 470 C 1500-350 (2006)Working hours : only 7.113 hClamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mmApproximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg
Arburg 420 C 1000-250 (2000)Clamping force : 100 tScrew diameter : 30 mmDistance between tie bars : 420 x 420Shot weight : 100 gWorking hours : 134.000 h
Arburg 270 C 400-100 (2000)Clamping force: 40 tScrew diameter : 20 mmDistance between tie bars : 270 x 269 mmShot weight : 25 gType : horizontalDrive : hydraulicHours : 138000 h
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Key data: 3200 kN, 703 g/PS, 55 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...
Key data: 1100 kN, 201 g/PS, 40 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...
Key data: 1000 kN, 127 g/PS, 35 mm
Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...
Key data: 1600 kN, 359 g/PS, 50 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...
Machine Name : Chen Hsong EM120-VYear of Manufacture : 2011Operating Hours : 58,209Clamping Force (kN) : 1200Injection Pressure (bar) : 1700Cylinder Volume (cm³) : 203Screw Diameter (mm) : 42Horizontal Platen Size (mm) : 610Vertical Platen Size (mm) : 560Tie Bar Distance Horizontal (mm) : 410
Ref. no.: 18092Hersteller: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 24780 kg
Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. O ...
Arburg 270 S 250-60 (2004)Clamping Force: 25 tTie Bar Spacing: 270 mm × 270 mmPlaten Dimensions: 400 mm × 400 mmMax. Mold Opening Stroke: 275 mmMin. Mold Height: 198 mmMax. Daylight: 279 mmEjector Stroke: 95 mmMold Opening Force (Max.): 14 kNMachine Dimensions (W × D): 1250 mm × 3800 mmMachine Weight: Approximately 1900 kgScrew Diameter: 22 mmStroke Volume: 39 cm³Injection Pressure: 1810 barInjection Flow (2 Pumps): Up to 8.1 cm³/sMaterial Throughput (PS): Up to 22.0 kg/hYear of Manufacture: 2004Type: Hydraulic Injection Molding Machine
Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible.
Arburg 820 S 4000-3200 (2005)Clamping Force: 400 tonScrew Diameter: 90 mmShot Weight: 1860 gInjection Volume: 2036 cm³Injection Pressure: 1580 barOpening Stroke: 700 mmDistance Between Tie Bars: 820 × 820 mmMould Height Min/Max: 350 – 850 mmOpening Width: 1050 – 1550 mmPlaten Size (h × v): 1171 × 1171 mmMachine Dimensions (L × W × H): 8,3 × 2,3 × 2,4 mMachine Weight: 22 500 kgWorking hours : 79.000
Key data: 1600 kN, 184 g/PS, 40 mm
Arburg 520A-1600-400 (228) Hybrid Injection Moulding Machine Number: 228 Availability: in stock Year of production: 2007 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40 Spray weight [g]: 184 Injection pressure [bar]: 2000 Clamping force [kN]: 1600 Gap spacing [mm]: 520 x 520 Panel size [mm]: 795 x 795 Control Type: Selogica Tongue: English, German Installed power [kW]: 21.2 Working hours [h]: 83564 Weight [kg]: 9000 Dimensions [mm]: 5500 x 2000 Feed hopper: NO Robot Socket: Yes Air valve: 3x
injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
Key data: 900 , 183 , 40
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Injection moulding machine Demag erg. 250/560 840 BJ 2001
Injector for Plastics. - 30 mm spindle - Laboratory sample mold - Engine: 10 hp (7.5 kw). - Electrical panel
Ref. no.: 18565Hersteller: DEMAGYear of construction: 2005Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 500 x 500 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 750 x 750 mmInjection unitScrew diameter: 45 mmInjection volume: 323 cm³Shot weight: 290 gInjection pressure: 1973 barMeasurements and weightDimensions: 5.45 x 1.63 x 2.1 mMachine weight: 7500 kgRobotProducer: Wittmann Type: W721-0231 Year: 2005
Key data: 1500 , 220 , 40
Ref. no.: 18591Hersteller: ARBURGYear of construction: 2005Clamping unitClamping force: 160 tonOpening stroke: 450 mmDistance between tie bars: 520 x 520 mmMould height min.: 250 mmMould height max.: 550 mmOpening width: 700 mmPlaten size (h x v): 695 x 695 mmInjection unitScrew diameter: 45 mmInjection volume: 254 cm³Shot weight: 232 gInjection pressure: 1580 barMeasurements and weightMachine weight: 7100 kgDimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
MachinePoint
