We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 400 kN
Arburg 1200T 400-150 / Vertical injection moulding machine with rotary table Year of construction: 2003 Injection unit: Screw diameter: 35 mm Spray weight: 89 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 0x0 mm Size of clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Turntable diameter: 1200 mm Air valve x 3 Hydraulic core pull x 3 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Parallel Movements Protective housings are opened automatically It is possible to change the screw diameter for fi 40 mm The machine has an additional control panel - control by remote control Original tool crane The machine was serviced by the authorised service company Arburg in Germany ...
used
Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface
used
Key data: 3200 kN
Arburg 1500T 3200-1300 e² / Hybrid machine with one turntable Year of construction: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Size of clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Very precise turntable, driven by a servo motor, controlled by an inverter Turntable diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Sel ...
used
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...
used
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ...
used
Key data: 350 kN
Arburg 221M 350-75 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Injection pressure: 1570 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012
used
Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German
used
Key data: 300 kN
Arburg 270C 300-100 with the Wittmann W621 robot Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2240 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 30 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Robot Wittmann W621 Year of construction: 2004 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (rotation) and C Travels in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 2250 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 7.5 kW Hea ...
used
Key data: 500 kN
Arburg 270C 500-100 Year of construction: 1998 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot Interface Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal The machine has an additional control panel - control by remote control The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started by our service technicians before they are sold. It is possib ...
used
Arburg 270C-400-250 + robot Multilift and conveyor belt (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT
used
Key data: 500 kN
Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn
used
Arburg Injection Moulding Machine Type Allrounder 270M 250 Clamp force 250kN Operating voltage 420 v3 – 50 cycles Heating 3.9kW Pump motor 1x 7,50kW Year 1995 Machine weight: 1900kgs
used
Key data: 400 kN, 17 g/PS, 18 mm
Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes
used
Key data: 250 kN
Arburg 270S 250-60 U / Universal machine Year of construction: 2001 Injection unit: Screw diameter: 18 mm Injection weight: 17 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 270x270 mm Size of clamping plates: 400x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Universal machine, injection unit and clamping unit can work horizontally or vertically Air valve x 2 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 2100 kg Length/Width/Height: 2.89x1.11x1.85 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.7 kW Total power: 10.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video ...
used
Key data: 400 kN
Arburg 270S 400-70 / Very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 22 mm Spray weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Metrics: Weight: 2040 kg Length/Width/Height: 3.35x1.24x1.83 m Drive: Pumps/motor: 11 kW Heating capacity: 4.1 kW Total power: 15.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
used
Key data: 350 kN
Arburg 270U 350-100U / universal machine / operating hours: 21,158 h in automatic mode Year of construction: 07.2008 Injection unit: Screw diameter: 20 mm Spray weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270x270 mm Size of clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Universal machine, hybrid: high-speed, energy-saving and very quiet Operating hours: 21,158 h in automatic mode Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Injection unit and clamping unit can work horizontally or vertically Machine is equipped with an additional remote control to control the machine Metrics: ...
used
Key data: 250 kN, 20 g/PS, 18 mm
Arburg 270U-250-70 (221) Description General information SKU: (221) Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 20 g Clamping force: 250 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 380 x 380 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 35 kW Operating hours: 82,985 h Curmtbe2w8 Weight: 2100 kg Dimensions: 3m x 1.1 m Funnel: No Core Train: Yes Euromap: Yes
used
Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1
used
CLAMPING FORCE: 70TON PLATEN SIZES: 476 X 476MM D.B.T.B: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 250MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 70MM SCREW DIAMETER: 30MM INJECTION PRESSURE: 2470BAR STROKE VOLUME: 106CM3 SHOT WEIGHT (P/S): 89GR CONTROLS: SELOGICA MOTOR: 15KW HEATING CAPACITY: 8.6KW SCREW DRIVE: HYDRAULIC
used
1998 Arburg Allrounder 320 M 500 - 210, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones - no Weight 2610 kg, L x W: 4100 mm x 1200 mm year of made 1998 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
used
1996 Arburg Allrounder 320 M 500 - 90, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control Multronica Core pullers - no Hotrunner zones - no Weight 2360 kg, L x W: 4100 mm x 1200 mm year of made 1996 stock number 00660 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
used
Injection molding machine Manufacturer: Arburg Type: 320 S 50-60 Year of construction: 1997 Screw: 18 mm Clamping force max.: 500 kN Max. opening distance: 350 mm Tool installation height min.: 225 mm Tool clamping plates (WxH): 498 x 498 mm Weight bew. Half weight max.: 400 kg Effective screw length L/D: 24 Worm travel max.: 110 mm Moulded part weight max. g/PS: 45 Spray pressure max.: 2500 bar Worm torque max.: 325 Nm Screw circumferential speed max.: 54 m/min. Capacity granule container: 50 litres Horizontal injection position max.: 120 mm As an accessory, a removal is included. A screw with a diameter of 18 mm is mounted in the machine. The machine is fully functional and has always been maintained by Arburg.
used
2001 Arburg Allrounder Selecta 320 S 500 - 150, 50 t Clamping force 50 t Screw 30 mm Mold height min 225 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 78 ccm Control Selogica Core pullers - 1 Hotrunner zones - 9 Weight 2250 kg, L x W: 3700 mm x 1100 mm year of made 2001 stock num 00659 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
used
Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
used
Ref. no.: 18368Hersteller: ARBURGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 X 320 mmMould height min.: 300 mmMould height max.: 550 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 75 gInjection pressure: 2200 barMeasurements and weightDimensions: 3,25 x 1.15 x 2,0 mMachine weight: 2250 kg
used
Key data: 500 kN
Arburg 320A 500-170 with the sprue picker / electric machine Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit hardened - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the select ...
used
Key data: 300 kN
Arburg 320C 300-100 / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 30 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot Interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Original tool crane Metrics: Weight: 2250 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the tech ...
used
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann WP80 sprue picker Year of construction: 2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection A new injection unit is installed in the machine Built-in conveyor belt and sorting flap Sprue Picker Wittmann WP80 Year of construction: 2016 Travels in axes: X-100, Y-550, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2400 kg Length/Width/Height: 3.41x1. ...
used
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...
used
Key data: 600 kN
Arburg 320C 600-250 / Machine in very good technical condition Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Core Pull Control Injection unit hardened - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ...
used
Arburg 320C-500-170 (188) with conveyor belt, bimetallic screw Description General Information SKU: 188 Availability: In stock Year of construction: 2006 Brand: Arburg Specifications Injection weight: 105 g Clamping force: 500 kN Screw diameter: 35 mm Spray pressure: 1470 bar Tie bar spacing: 320x320 mm Clamping plate size: 446x446 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 20.4 kW Operating hours: 90000 h Weight: 2400 kg Dimensions: 3.5 x 2 m Funnel: No Core train: Yes Air valve: Yes
used
Key data: 700 kN
Arburg 320K 700-250 with the Arburg Multilift H lateral robot Year of construction: 2005 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On req ...
used
Key data: 700 kN
Arburg 320K 700-250 Year of construction: 2004 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 700 kN
Arburg 320K 700-250 Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 700 kN, 29 g/PS, 20 mm
Arburg 320K-700-100 (212) General information Item number: 212 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 29 g Clamping force: 700 kN Stand: Used Screw diameter: 20 mm Injection pressure: 2500 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 31 kW Hours: 88715 h Weight: 2170 kg Dimensions: 3.25 x 2 m Funnel: No
used
Key data: 700 kN, 121 g/PS, 35 mm
General information Item number: 209 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Hours: 94184 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes
used
Key data: 700 kN, 121 g/PS, 35 mm
General information Item number: 210 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Operating hours: 104195 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes
used
Key data: 700 kN, 85 g/PS, 30 mm
Arburg 320K-700-250 (214) General information Item number: 214 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 85 g Clamping force: 700 kN Stand: Used Screw diameter: 30 Injection pressure: 2470 Tie bar spacing: 320 x 320 Clamping plate size: 476 x 476 Tool installation height min.: 200 Control: Selogica Language: German,Polish Power: 35 Hours: 59684 Weight: 2350 Dimensions: 3.25 x 2 Funnel: No
used
Key data: 700 kN
Arburg 320KS 700-250 Year of construction: 11.2002 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 750 kN
Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 75 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Air valve x 1 It is possible to set the injection unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Metrics: Weight: 2360 kg Length/Width/Height: 4.24x1.90x2.05 m Drive: Pumps/motor: 15 kW Heating capacity: 4.6 kW Total power: 19.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On reque ...
used
Key data: 850 kN
Arburg 320M 850-210-210 / 2K machine Year of construction: 1992 Injection unit: Screw diameter: 25 mm Spray weight: 62 g Injection pressure: 2950 bar Dosing volume: 73 ccm Clamping unit: Clamping force: 85 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap 12 Robot Interface Air Valve x 7 Hydraulic core pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 25 mm Metrics: Weight: 3010 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 22 kW Heating capacity: 8 kW Total power: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Ł ...
used
Ref. no.: 18326Hersteller: ARBURGYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 300 mmDistance between tie bars: 370 x 370 mmMould height min.: 200-400 mmOpening width: 500-700 mmPlaten size (h x v): 510 x 510 mmInjection unitScrew diameter: 25 mmInjection volume: 59 cm³Shot weight: 54 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,2 x 1,5 x 2,1 mMachine weight: 3740 kgAdditional information & extrasCore pull: 1 pcsAccumulator: 1 pcsRobotProducer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg
used
Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German
used
Ref. no.: 18286Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 X 370 mmMould height min.: 250 mmOpening width: 700 mmPlaten size (h x v): 570 X 570 mmInjection unitScrew diameter: 35 mmInjection volume: 139 cm³Shot weight: 117 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,06 X 1,39 X 2,12 mMachine weight: 3800 kg
used
Key data: 700 kN
Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Spray weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 370x370 mm Size of clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot Interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on spray units - precise spraying Parallel Movements The vertical injection unit - screw diameter fi 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Machine with buil ...
used
Key data: 800 kN
Arburg 370S 800-350 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot Interface Hydraulic core pull x 2 Injection unit hardened - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...
used
Clamping Force: 50 // Shot Weight (Max): 172
used
Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface
used
Injection Molding Machine Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (year 2003) stock number 00653 Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg, L x W 4250 x 1640 mm year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)