294 offers arburg

Category: 310 spare parts for plastic machinery
Latest update: 28.10.2022 add to watchlist
ankerimg
item-No.: 143718143
used
Seller: country-hu

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 12.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160010317
New in: 1998
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 4310 RHEINFELDEN

1,0 Pcs. gebr. Injection moulding machine with robot Manufacturer: ARBURG Type: 370C800-250 Year of construction: 1998 Clamping force: 80 tons Spar spacing: 370 x 370 mm Screw diameter: 35 mm Moulded part weight in HP: 121 g Control: SELGOCIA Equipment: -Robot, manufacturer Geiger -2.0 core trains

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220215
New in: 1997
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 270S250-60 Year of construction: 1997 Clamping force: 35 tons Tie bar distance 270 x 270 mm Screw diameter: 22 mm Moulded part weight in hp: 18 g Control: SELGOCIA Equipment: -1 x core pull

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220213
New in: 1998
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 270S350-60 Year of construction: 1998 Clamping force: 35 tons Tie bar distance 270 x 270 mm Screw diameter: 22 mm Moulded part weight in hp: 18 g Control: SELGOCIA Equipment: -1 x core pull

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220212
New in: 1997
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 320S500-150 Year of construction: 1997 Clamping force: 50 tons Tie bar distance 320 x 320 mm Screw diameter: 35 mm Moulded part weight in hp: 132 g Control: SELGOCIA Equipment: -Interface handling -Interface host computer -Extended travel movements

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220214
New in: 1999
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 520C2000-675 Year of construction: 1999 Clamping force: 200 tons Tie bar distance: 570 x 570 mm Screw diameter: 35 mm Control: SELGOCIA Equipment: -1.0 pcs core pull

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220216
New in: 2000
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 570C2200-675 Year of construction: 2000 Clamping force: 220 tons Tie bar distance: 570 x 570 mm Screw diameter: 60 mm Moulded part weight in hp: 464 g Control: SELGOCIA Equipment: -1.0 pcs core pull -Handling interface -Selection unit -Interface host computer -Equipment package No. 1 Extended Surveillances -Equipment package No. 2 Extended driving movements -Equipment package no. 3 Production control -Equipment package no. 5 optimization Accessibility -Equipment package no. 6 Quality assurance -Equipment package no. 7 documentation

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220211
New in: 2000
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 320S500-150 Year of construction: 2000 Clamping force: 50 tons Tie bar distance 320 x 320 mm Screw diameter: 25 mm Moulded part weight in hp: 49 g/hp Control: SELGOCIA Equipment: -1 x core pull

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 18.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160258252
New in: 1993
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77718 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 370C600-100 Year of construction: 1993 Clamping force: 60 tons Tie bar distance 370 x 370 mm Screw diameter: 30 mm Moulded part weight in hp: 60 g Control: Equipment: -1 x core pull -Interface robot Video of the machine available

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 18.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160258256
New in: 1995
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77718 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 370C600-100 Year of construction: 1995 Clamping force: 60 tons Tie bar distance 370 x 370 mm Screw diameter: 25 mm Moulded part weight in hp: 41 g Control: Equipment: -1 x core pull -Interface robot Video of the machine available

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220217
New in: 2001
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 620S2500-1300 Year of construction: 2001 Clamping force: 250 tons Tie bar distance: 620 x 620 mm Screw diameter: 60 mm Displacement: 664 cm³ Control: SELGOCIA Equipment: -2.0 pcs core pulls on movable plate -Handling interface -Position-controlled screw -Kistler internal pressure booster -Screw in highly wear-resistant Execution -6 hot runner control loops -Pneumatic valve gate nozzle

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 13.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160220210
New in: 1999
used
TOP Seller: country-de SWISSBID IBS MACHINES AG
Location: 77719 Haslach im Kinzigtal

1.0 pcs. Injection moulding machine U - version Manufacturer: ARBURG Type: 220S250-60U Year of construction: 1999 Clamping force: 25tons Tie bar distance 220 x 220 mm Screw diameter: 22 mm Moulded part weight in hp: 27 g Control: SELGOCIA Equipment: -U - version -Interface host computer -Extended travel movements

Category: 301 injection moulding machines
Latest update: 07.12.2022 add to watchlist
ankerimg
item-No.: 158487018
New in: 1986
used
Seller: country-de
Location: münchen

2) ARBURG A 270-500-210-H Maschinen-Nr. 144 192 year. 1986, Find more here - https://www.ucymachines/

Category: 301 injection moulding machines / Injection molding machines
Latest update: 05.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 153016695
New in: 2006
used
Seller: country-pl TADplast
Location: 75816 Koszalin

Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes

Category: 301 injection moulding machines / Injection molding machines
Latest update: 22.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158217492
New in: 2001
used
Seller: country-kr TMS CO.,LTD

Allrounder 470C-1300-350 Clamping force : 130 ton Screw diameter : 40mm Manufactured year : 2001

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297374
New in: 2003
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 1200T 400-150 / Vertical injection moulding machine with the rotary table Year of construction: 2003 Injection unit: Screw diameter: 35 mm Injection weight: 89 g Spray pressure: 1620 bar Dosing volume: 106 cc Clamping unit : Clamping force: 40 t Tie bar distance: 0x0 mm Size of clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Rotary table diameter: 1200 mm Air valve x 3 Hydraulic core pull x 3 Hot runner control x 6 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Parallel movements Protective housings are opened automatically It is possible to change the screw diameter for fi 40 mm The machine has an additional control panel - remote control Original tool crane Machine was serviced by the authorized service Arburg in Germany Metrics: We ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297370
New in: 1993
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 220-90-350 Year of construction: 1993 Injection unit: Screw diameter: 22 mm Injection weight: 32 g Spray pressure: 2400 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Size of the platens: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: HYDRONICA Additional equipment: Very good technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1700 kg Length/Width/Height: 3.31x1.75x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Total power: 14.5 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297369
New in: 1993
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 220-90-350 Year of construction: 1993 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar distance: 221x221 mm Size of the platens: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: HYDRONICA Additional equipment: Very good technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1700 kg Length/Width/Height: 3.31x1.75x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Total power: 14.5 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297371
New in: 1991
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 220D 350-90 Year of construction: 1991 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Size of the platens: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Metrics: Weight: 1850 kg Length/width/height: 3.30x1.20x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Cylinder heating: 14.5 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297365
New in: 1997
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 220M 350-90 Year of construction: 1997 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar distance: 221x221 mm Size of the platens: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pumps/motor: 11 kW Heating capacity: 4.6 kW Total power: 15.6 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297367
New in: 1997
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 220M 350-90 Year of construction: 1997 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1290 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Size of the platens: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Perfect technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pumps/motor: 11 kW Heating capacity: 4.6 kW Total power: 15.6 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297361
New in: 2001
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 221KS 350-100 VO Year of construction: 2001 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar distance: 221 mm Size of the platens: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Training machine - small number of operating hours Hardened injection unit - bimetal It is possible to change the screw diameter for fi 20, 30 mm Metrics: Weight: 1280 kg Length/Width/Height: 2.30x1.40x2.10 m Drive: Pumps/motor: 8 kW Heating capacity: 4.6 kW Total power: 12.6 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297363
New in: 2002
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 221KS 350-100 VO Year of construction: 2002 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221 mm Size of the platens: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Training machine - small number of operating hours Hardened injection unit - bimetal It is possible to change the screw diameter for fi 20, 30 mm Metrics: Weight: 1280 kg Length/Width/Height: 2.30x1.40x2.10 m Drive: Pumps/motor: 8 kW Heating capacity: 4.6 kW Total power: 12.6 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297359
New in: 1999
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 221KS 350-100U Year of construction: 1999 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar distance: 221 mm Size of the platens: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine, the injection unit can run horizontally or vertically Air valve x 1 Core tension control Hardened injection unit - bimetal Auto-opening covers Clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4.6 kW Total power: 12.1 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297372
New in: 1996
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 221M 350-75 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1570 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221 mm Size of the platens: 342x250 mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297375
New in: 2005
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 270C 400-100 Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 cc Clamping unit: Clamping force: 40 t Tie bar distance: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced moulded parts for medical industry - pure production conditions Core tension control Hardened injection unit - bimetal The machine was regularly serviced by authorised service Arburg Metrics: Weight: 2180 kg Length/Width/Height: 3.12x1.43x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW Price: On request

Category: 301 injection moulding machines / Injection molding machines
Latest update: 29.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158866770
New in: 1998
used
Seller: country-pl TADplast
Location: 75816 Koszalin

Arburg 270C-300-100 (165) Item number: 165 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 45 g Clamping force: 300 kN Screw diameter: 25 mm Spray pressure: 2240 bar Spar spacing: 270 x 270 mm Clamping plate size: 446 x 446 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 12.4 kW Operating hours: 60701 h Weight: 1980 kg Dimensions: 3.7 x 1.6 m Funnel: No Core train: Yes Air valve: Yes

Category: 301 injection moulding machines / Injection molding machines
Latest update: 05.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 139624352
New in: 2004
used
Seller: country-pl TADplast

Arburg 270C-400-250 + robot Multilift and conveyor belt (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT

Category: 301 injection moulding machines / Injection molding machines
Latest update: 29.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157436312
New in: 2000
used
Seller: country-pl TADplast
Location: 75816 Koszalin

Arburg 270C-500-100 (138) without funnel, with sorting flap Year of construction: 2000 Brand: Arburg Specifications Spray weight: 26 g Clamping force: 500 kN Screw diameter: 20 mm Spray pressure: 2500 bar Spar spacing: 270 x 270 mm Clamping plate size: 446 x 446 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 19.9 kW Operating hours: 87858 h Weight: 1980 kg Dimensions: 3.8 x 1.7 m Funnel: No Core train: Yes Air valve: Yes Heating ducts: Yes

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 23.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160297356
New in: 1997
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Arburg 270S 250-60 Year of construction: 1997 Injection unit: Screw diameter: 18 mm Injection weight: 17 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 25 t Tie bar distance: 270x270 mm Size of the platens: 400x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x2 Hot runner control x 6 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 1900 kg Length/Width/Height: 2.89x1.15x1.85m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW Price: on request

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online