We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 180000 kN, 447 g/PS, 50 mm
Clamping force: 180 t Year of construction: 2013 Injection weight in PS: 447 g Control Type: Unilog B6P Injection unit: .../1000 Screw diameter: 50 mm Spec. Injection pressure: 2016 bar Spraying volume: 491 ccm Injection weight in PS: 447 g L/D screw ratio: 22 Clamping unit: 180/... Clamping force:: 180 t Lights spar spacing: 570 x 520 mm Ejector force: 41.2 kN Tool installation height: 325 mm Aperture travel: 850 mm Max. plate spacing: 1175 mm Ejector travel: 200 mm General information: Fuel tank capacity OIL: 400 l Weight: 8000 kg Dimensions(m) LxWxH: 5.2 x 1.6 x 2.2 m
used
Key data: 400000 kN, 980 g/PS, 65 mm
Clamping force: 400 t Year of construction: 2018 Injection weight in PS: 980 g Control type: UNILOG B8 Injection unit: .../2250 Screw diameter: 65 mm Spec. Injection pressure: 2070 bar Spray volume: 1078 ccm Injection weight in PS: 980 g L/D screw ratio: 22 Clamping unit: 400/... Clamping force:: 400 t Tool installation height: 400...850 mm Aperture travel: 1050 mm Max. plate spacing: 1900 mm Equipment: Servomotor Restricted access area Conveyor belt Robot W832 / Z: 2500 Y: 1600 X:500 2 x pneumatic valve on the fixed plate 2 x pneumatic valve on the movable plate 2 x hydraulic core on the fixed plate 2 x hydraulic core on the movable plate Hour meter: 14,200 working hours
Key data: 1000 kN, 6947 g/PS, 120 mm
Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm
used
Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8
used
This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm
used
Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 350 kN
Battenfeld Plus 350/75 Year of construction: 1997 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Euromap 12 Robot Interface Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 450 kN
Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 18 mm Injection weight: 20.8 g Spray pressure: 2593 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service tec ...
used
Key data: 450 kN
Battenfeld HM 45/60S with the Wittmann W702 sprue picker / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 22 mm Injection weight: 31.1 g Injection pressure: 1736 bar Dosing volume: 34.2 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection It is possible to buy the machine with the Wittmann W702 sprue picker for additional payment Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 ...
used
Key data: 500 kN
Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...
used
Key data: 1000 kN
Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...
used
Key data: 1600 kN
Battenfeld TM 1600/750 Year of construction: 1999 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: It is possible to install Euromap interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 6000 kg Length/Width/Height: 5.05x1.51x2.09 m Drive: Pumps/motor: 22 kW Heating capacity: 13.8 kW Total power: 35.8 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: ...
used
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical injection moulding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Spray weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 454x740 mm Size of clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Metrics: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technica ...
used
Key data: 2700 kN
Battenfeld TM 2700/1900 Year of construction: 2002 Injection unit: Screw diameter: 65 mm Spray weight: 981 g Spray pressure: 1777 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 270 t Tie bar spacing: 630x630 mm Size of clamping plates: 940x940 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Euromap Robot Interface Air valve x 2 Hydraulic core pull x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Central lubrication Automatic tool height adjustment Parallel Movements Metrics: Weight: 11800 kg Length/Width/Height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
used
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of construction: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Injection pressure: 2500 bar Dosing volume: 772 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Size of clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection The machine is equipped with a new original auger and cylinder Robot Wittmann W818 4-axis, high-speed ...
used
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of construction: 2012 Injection unit: Screw diameter: 50 mm Spray weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot Interface Air valve x 8 Hot runner control x6 Injection unit hardened - Bimetal Parallel Movements It is possible to change the screw diameter for fi 45, 55, 65 mm Metrics: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our service techni ...
used
Injection Molding Machine Brand: Battenfeld, model: Macropower 1100/800 unilog B8, year: 2019. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Key data: 10000 kN, 6974 g/PS, 120 mm
Year of construction 2005 Operating hours: 20,437 h Installation height 500 / 1050 mm Aperture travel 1300 mm Clamping dimensions 1350 / 1350 mm Tie bar spacing 1400 / 1120 mm Centering 250 / 250 mm Core Pull 2x Maximum clamping force 10000 KN Calculated dosing volume 7634 ccm Maximum shot weight polystyrene 6947 g Screw diameter 120 mm Water circuits DS 6 / AS 6 Equipped with Wittmann handling With conveyor belt
used
Key data: 10000 kN, 90 mm
warehouse no.: 503402 manufacturer: BATTENFELD type: HM 8000-7700 controller: UNILOG B4 year of construction: 2003 operation hours: 50800 h clamping force: 8000 kN distance between tie-bars h x v: 1120 x 1020 mm size of mould plates h x v: 1620 x 1530 mm min. mould height: 725 mm max. mould height: 1175 mm max. open daylight: 2225 mm opening stroke: 1500 mm screw diameter: 90 mm swept volume: 3181 ccm injection pressure: 2420 bar equipment included: screen text german Bi-metallic barrel core pulling hydraulically 3x air valve 1x machine incl. Handling Anti vibration mounts interface EUROMAP 67 measures of machine l x w x h: 10.41m x 2.34m x 2.47m total weight: 56500KG
used
Key data: 2100 kN, 45 mm
warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12 ...
used
Key data: 2100 kN, 45 mm
Stock No.: 502923 Manufacturer: BATTENFELD Type: TM 2100-750+350V Control: UNILOG B4 Year of construction: 2003 Clamping force: 2100 kN Holm h x w: 570 x 570 mm Plate size h x w: 840 x 840 mm Min. installation height: 350 mm Max. installation height: 700 mm Plate spacing max.: 1230 mm Aperture travel: 530 mm Screw diameter: 45 mm Displacement: 358 ccm Spray pressure: 2116 bar Equipment 8x temperature control unit for hot runner On-screen text German CEE socket 16A Core pull hydraulic 1x Core hoist hydraulic 3x Air valve 1x Machine with water battery Machine without material hopper Spring-loaded valve gate nozzle Levelling elements EUROMAP 12 interface EUROMAP 13 interface Schuko socket 10A Two-Component Injection Molding Machine Machine dimensions LxWxH: 5.7m x 1.5m x 3.97m Total Weight: 13900KG
used
Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m
used
Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2
used
Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40
used
Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg
Clamping force: 10000 t Production year: 2002 Injection weight: 6175 g Injection unit: .../12000 Screw diameter: 120 mm Injection weight: 6175 g Tool closure system: 10000/... Clamping force: 10000 t Distance between columns: 1400 x 1200 mm Tool height: 550...1255 mm
used
See PDF attached
used
Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW
used
1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,
used
Year of construction: 2002 Control type: UNILOG B4 Screw diameter: 22 mm Spec. Spray pressure: 1488 bar Injection volume: 33.4 cc Injection weight in hp: 30.4 g Clamping unit: 600/... Clamping force: 60 t Size of the clamping plates: 896 mm Lights tie bar distance: 540 x 245 mm Opening distance: 250 mm plate spacing: 500 mm Ejector travel: 150 mm Cylinder heating capacity: 3.4 kW General information: Delivery time: Short term Size(m) LxWxH: 4.8 x 2.0 x 3.1 m Weight: 4600 kg