160 offers engel

Category: 110 accessories for machine tools
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159145612
New in: 2014
used
Seller: country-es Vanto Machines
Location: Barcelona
Price: 16.500 €

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Category: 110 accessories for machine tools
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158083647
New in: 2014
used
Seller: country-es Vanto Machines
Location: Barcelona

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158959108
New in: 2003
used
Seller: country-es Vanto Machines
Location: Barcelona

- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100

Category: 301 injection moulding machines
Latest update: 21.10.2021 add to watchlist
ankerimg
item-No.: 4224073
New in: 2001
used
Seller: country-ch DREYER-EXPORT
Location: Baden

1 Piece / only molding/INJECTION MOULDING MACHINE, Angel it 2550 / 420 K Condition: Condition: Used, but in good optical and mechanical condition/used, however in good optical and mechanical condition built 2001 year of make Clamping force of 420 to locking force Snails & #61638; 70 mm screw & #61638; Schneckndrehzahl UpM 183 screw rotation rpm Maximum injection volume 1193 CC Max shotvolume Heating power of kW 35.3 heating capacity kW Gap of Max 700 mm Max.Stroke Mould installation height of min. 250-860 mm Min.Mouldheight Clamping plates hor/vert 1080 x 1080 mm platen size hor/vert Between the spars hor/vert 735 x 735 mm distance between tiebars hor/vert Between plates plate distance 1560 mm distance Control CC 100 control Pump drive kW 45 pump drive kW Dimensions L x W x H mm 8000 x 2040 x 2473 Meaurements L x B/W x H Weight 20.5 to weight EQUIPMENT: EQUIPMENT: Robot ERC43/3-E robot  ...

Category: 310 spare parts for plastic machinery
Latest update: 07.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158795367
New in: 2006
used
Seller: country-de Complast Gmbh
Price: VB 19.040 €

Pump system 75kW 140_140_71 Spare part number: 0403-620-10-10-160 Manufacturer number: UC 0603/001111003 IMB5 + MNR: R901021899 + valve MNR: R900702586 MNR: R901021899 + valve MNR: R900702586 MNR: R901021900 + valve MNR: R900702586 - Fully functional - Expanded from: Engel_DUO2550H-2550M-900WP combi, 160174, 2006

Category: 301 injection moulding machines / Injection molding machines
Latest update: 27.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 146977346
New in: 2011
used
Seller: country-at Lovric Maschinenhandel e.U.
Location: 2512 Tribuswinkel

Angel 2-K machine Angel Robot ERC

Category: 305 peripheral equipment (e.g. heating,cooling,drying) / Robots
Latest update: 21.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159328092
New in: 2009
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Angußpicker - Engel ER-USP5 / Very good technical condition Year of construction: 2009 Description: Additional control panel - own control Weight: 52 kg Price: On request

Category: 301 injection moulding machines / Injection molding machines
Latest update: 18.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159022459
New in: 2006
used
Seller: country-at Lovric Maschinenhandel e.U.
Location: 2512 Tribuswinkel

As of today, 92,434 operating hours, Screw diameter is 190 mm. Aggregate 45050. L/D 22 Barrier screw with mixed part. Dosing distance 900 mm displacement 25,520 sqcm. Shot weight approx. 18 kg. Length of the machine 17,418 mm Width of the machine 4,300 mm Height of the machine 3436 mm Weight of the machine 156 to. With oil pan Robot ERC 125/0-F, / Year of construction 2006 Lights Holab distance 2,000 x 1,600 mm (h / v) Clamping plates 2,900 x 2,500 mm (h / v) Max plate spacing 3,800 mm Min tool installation height 800 mm Max tool installation height 1,800 mm 32 heating zones Core pulls 2 pieces fixed side / 4 movable side Needle closure / cascade hydraulic 10 pieces Needle closure / cascade pneumatic 8 pieces

Category: 301 injection moulding machines / Injection molding machines
Latest update: 16.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159823539
New in: 1999
used
TOP Seller: country-it GINDUMAC GmbH

BRAND: ENGEL YEAR: 1999 MODEL: ES 23050/2500 DUO PRODUCTION HOURS: 91191 APPLICATION TYPE: INJECTION MOULDING LOCATION: ITALY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: 01/03/2023 Technical Information GENERAL DATA MACHINE WEIGHT: 30000 KG CONTROL UNIT BRAND: ENGEL MAIN DRIVE DISTANCE BETWEEN BARS: 2175 MM X 1750 MM INJECTION UNIT SCREW DIAMETER: 150 MM CLAMPING UNIT CLAMPING FORCE: 25000 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - OPENING POWER: 1600 KN - OPENING LENGHT: 3100 MM - DIAMETER OF THE COLUMNS: 360 MM - DOSING LENGHT: 720 MM - MAX INJECTED VOLUME: 12725 CM2 - ROTATIONAL SPEED OF THE SCREW: 85 RPM - SPECIFIC INJECTION PRESSURE: 1410 BAR - HEATING POTENCE: 120 KW - HEAT ZONES: 7 QUALITATIVE MACHINE BENEFITS: - THE ROBOT IS INCLUDED - THE MACHINE IS IN VERY GOOD ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160155709
New in: 1999
used
TOP Seller: country-se GINDUMAC GmbH

BRAND: ENGEL YEAR: 1999 MODEL: ES 3550/400 HL PRODUCTION HOURS: 67591 APPLICATION TYPE: INJECTION MOULDING LOCATION: SWEDEN MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 23650 KG CLAMPING FORCE: 4000 kN INJECTION UNIT SCREW DIAMETER: 90 MM SHOT WEIGHT: 2232 G Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISPLACEMENT: 2480 CM3

Category: 301 injection moulding machines / Injection molding machines
Latest update: 07.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158843857
New in: 2000
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ENGEL YEAR: 2000 MODEL: ES 3550/400 HL APPLICATION TYPE: INJECTION MOULDING LOCATION: SPAIN MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: 01/09/2022 CONTROL UNIT BRAND: ENGEL Technical Information GENERAL DATA MACHINE WEIGHT: 8000 KG CONTROL UNIT BRAND: ENGEL INJECTION UNIT SCREW DIAMETER: 80 MM INJECTION PRESSURE: 1730 BAR CLAMPING UNIT CLAMPING FORCE: 4000 KN

Category: 301 injection moulding machines / Injection molding machines
Latest update: 04.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160162571
New in: 2001
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ENGEL YEAR: 2001 MODEL: ES4550/800 DUO PRODUCTION HOURS: 93386 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: ENGEL GINDUMAC ID: PL-INJ-ENG-2001-00003 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 9000 MM MEASUREMENTS DEPTH: 3000 MM MEASUREMENTS HEIGHT: 2800 MM MACHINE WEIGHT: 44000 KG CONTROL UNIT BRAND: ENGELMODEL: CC 100 TABLE OUTER LENGTH: 1650 MM OUTER WIDTH: 1470 MM INJECTION UNIT SCREW DIAMETER: 105 MM SHOT WEIGHT: 3250 G STROKE VOLUME: 3380 CM³ INJECTION PRESSURE: 1600 BAR CLAMPING UNIT CLAMPING FORCE: 8000 KN EJECTOR STROKE: 300 MM ADDITIONAL EQUIPMENT - ROBOT MODEL: ENGEL ERC83/3-E Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CLEARANCE BETWEEN COLUMNS: 1170 X 1000 MM - TOOL HEIGHT: 500 ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 11.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160209249
New in: 2003
used
TOP Seller: country-de GINDUMAC GmbH

BRAND: ENGEL YEAR: 2003 MODEL: 1050/275 HL APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 20000 KG CONTROL UNIT BRAND: ENGEL CLAMPING UNIT CLAMPING FORCE: 2750 KN

Category: 301 injection moulding machines / Injection molding machines
Latest update: 26.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159676889
New in: 2003
used
TOP Seller: country-cz GINDUMAC GmbH

BRAND: ENGEL YEAR: 2003 MODEL: Victory 750/150 Tech PRODUCTION HOURS: 38987 APPLICATION TYPE: INJECTION MOULDING LOCATION: CZECH REPUBLIC MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 9100 KG CONTROL UNIT BRAND: ENGEL INJECTION UNIT SCREW DIAMETER: 50 MM STROKE VOLUME: 393 CM³ INJECTION PRESSURE: 1439 BAR SCREW SPEED: 230 1/MIN CLAMPING UNIT CLAMPING FORCE: 1500 KN OPENING STROKE: 605 MM EJECTOR STROKE: 130 MM EJECTOR FORCE FOR / BACK: 60,8 KN GENERAL DATA MACHINE WEIGHT: 9100 KG CONTROL UNIT BRAND: ENGEL INJECTION UNIT SCREW DIAMETER: 50 MM STROKE VOLUME: 393 CM³ INJECTION PRESSURE: 1439 BAR SCREW SPEED: 230 1/MIN CLAMPING UNIT CLAMPING FORCE: 1500 KN OPENING STROKE: 605 MM EJECTOR STROKE: 130 MM EJECTOR FO ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 07.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159676888
New in: 2003
used
TOP Seller: country-cz GINDUMAC GmbH

BRAND: ENGEL YEAR: 2003 MODEL: Victory 750/150 Tech PRODUCTION HOURS: 38987 APPLICATION TYPE: INJECTION MOULDING LOCATION: CZECH REPUBLIC MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 9100 KG CONTROL UNIT BRAND: ENGEL INJECTION UNIT SCREW DIAMETER: 50 MM STROKE VOLUME: 393 CM³ INJECTION PRESSURE: 1439 BAR SCREW SPEED: 230 1/MIN CLAMPING UNIT CLAMPING FORCE: 1500 KN OPENING STROKE: 605 MM EJECTOR STROKE: 130 MM EJECTOR FORCE FOR / BACK: 60,8 KN Additional Information MACHINE BENEFITS QUALITATIVE MACHINE BENEFITS: - GOOD CONDITION WITH LOW HOURS

Category: 301 injection moulding machines / Injection molding machines
Latest update: 17.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160251368
New in: 2015
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ENGEL YEAR: 2015 MODEL: Duo 1800H/1050M/400 combi M PRODUCTION HOURS: 2000 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY GINDUMAC ID: DE-INJ-ENG-2015-00001 Technical Information GENERAL DATA MACHINE WEIGHT: 27000 TONS CLAMPING UNIT CLAMPING FORCE: 4000 KN OPENING STROKE: 1700 MM MOULD HEIGHT MIN: 1100 MM MOULD HEIGHT MAX: 1600 MM SIZE OF MOLD PLATENS: 1100 X 1190 MM EJECTOR STROKE: 250 MM EJECTOR FORCE FOR / BACK: 95 KN ADDITIONAL EQUIPMENT - 6-AXIS ROBOT ENGEL EASIX 200 INTEGRATED WITH MACHINE CONTROL SYSTEM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NUMBER OF INJECTION UNITS: 2 - SIZE INJECTION UNIT 1: 1800 - SCREW DIAMETER 1: 60 MM - MAX. SHOT WEIGHT 1: 801 G - SIZE INJECTION UNIT 2: 1050 - SCREW DIAMETER 2: 50 MM - MAX. SHOT WEIG ...

Category: 301 injection moulding machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 160326243
New in: 2015
used
TOP Seller: country-pl GINDUMAC GmbH

BRAND: ENGEL YEAR: 2015 MODEL: e-motion 2440/380 T PRODUCTION HOURS: 53893 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: 01/01/2023 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 8216 MM MEASUREMENTS DEPTH: 3208 MM MEASUREMENTS HEIGHT: 5039 MM MACHINE WEIGHT: 22200 KG CONTROL UNIT BRAND: ENGEL MODEL: CC300 INJECTION UNIT NOZZLE PRESSURE: 500 MM CLAMPING UNIT CLAMPING FORCE: 3800 KN OPENING STROKE: 700 MM MOULD HEIGHT MIN: 300 MM MOULD HEIGHT MAX: 750 MM SIZE OF MOLD PLATENS: 1140X1140 MM EJECTOR FORCE FOR / BACK: 120 KN MEDIA MAIN ELECTRONIC CONNECTION: 3X400V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HIGH PERFORMANCE AND PRECISION. - ALL-ELECTRIC AND ENERGY EFFICIENT. - FAST, DYNAMIC AND HIGHLY PRECISE MOVEMENTS THROUGH A FIVE-POINT ...

Category: 301 injection moulding machines / Injection molding machines
Latest update: 07.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159970113
New in: 2018
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ENGEL YEAR: 2018 MODEL: INSERT 500V/100 PRODUCTION HOURS: 13258 APPLICATION TYPE: INJECTION MOULDING LOCATION: SWEDEN MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY GINDUMAC ID: SE-INJ-ENG-2018-00001 Technical Information GENERAL DATA MACHINE WEIGHT: 8500 KG INJECTION UNIT SCREW DIAMETER: 40 MM STROKE VOLUME: 251 CM3 CM³ INJECTION PRESSURE: 1300 BAR (REGENERATIVE) - 2020 BAR (MAX) CLAMPING UNIT CLAMPING FORCE: 1000 KN DISTANCE BETWEEN BARS: 700 MM MOULD HEIGHT MIN: 350 MM EJECTOR STROKE: 105 MM MEDIA MAIN ELECTRONIC CONNECTION: 110 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - L/D RATIO: 20 - HEATING ZONES INCL. NOZZLE: 4 - HEATING: 9,3 KW - OPENING STROKE + CYLINDER TOLERANCE: 358 MM - PLATEN SIZE HORIZONTAL X VERTICAL: 1130 X 500 MM - MAXIMUM MOLD WEIGHT MOVING PLATEN: 600 KG - MAXIM ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340658
New in: 2006
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Hessen

clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340673
New in: 1992
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Slowakei

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301 injection moulding machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 160328995
New in: 2018
used
Seller: country-de Innovac GmbH
Location: Deutschland

Clamping force: 1600kN, operational hours counter: 5532h, with Handling Robot ENGEL viper 20.

Category: 301 injection moulding machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 160328994
New in: 2014
used
Seller: country-de Innovac GmbH
Location: Deutschland

Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340683
New in: 1998
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Ostdeutschland

clamping force: 2.750 kN injection volume: 735 cm³ screw diameter: 60 mm platen size: 1.050 x 900 mm daylight between platens - max.: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340661
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Norddeutschland

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156875278
New in: 1994
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Ostdeutschland

clamping force: 250 kN injection volume: 38 cm³ screw diameter: 22 mm platen size: 470 x 280 mm daylight between platens - max.: 480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156340700
New in: 2003
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Ostdeutschland

clamping force: 250 kN injection volume: 38 cm³ screw diameter: 22 mm platen size: 470 x 280 mm daylight between platens - max.: 480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 307 rubber machines / Rubber injection presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158554230
New in: 2003
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Hessen

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301 injection moulding machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 160329074
New in: 2003
used
Seller: country-de Innovac GmbH
Location: Deutschland

Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.

Category: 307 rubber machines / Rubber injection presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156871346
New in: 2004
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Westdeutschland

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 307 rubber machines / Rubber injection presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156875379
New in: 2010
used
Seller: country-de MEB Maschinenhandel GmbH
Location: Slowakei

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online