We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
used
CLAMPING FORCE: 250TON PLATEN SIZES: 930 X 930MM D.B.T.B: 630 X 630MM MIN MOULD HEIGHT: 330MM MOULD OPENING STROKE: 670MM MAX DAYLIGHT: 1380MM EJECTOR STROKE: 200MM SCREW DIAMETER: 50MM INJECTION PRESSURE: 3032BAR STROKE VOLUME: 530CM3 SHOT WEIGHT (P/S): 482GR CONTROLS: NC5 SCREW DRIVE: ELECTRIC AIR CIRCUIT: 4
used
BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America
used
Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES
used
Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stroke: 930 mm Between columns: 1000 x 9000mm Tray dimensions: 1450 x 1350 mm Mini / maxi mold: 450/950 mm Max distance between plates: 1880 mm Injection: Screw diameter: 95 mm Screw length: 20D cm3: 3367 Bars: 1895 General: Engine power: 74 kw Heating power: 43 kw Closing weight: 25t Injection weight: 80tonnes Dimensions length: 10.10m Dimensions width: 2.50m Dimensions height: 2.60 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runners, magnetic plate,
used
For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...
used
SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm à 1555.0 mm à 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours â CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year âOctober 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...