We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 1500 kN
Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...
used
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
used
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...
used
FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...
used
Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net
used
Ferromatik Milacron K-TEC250S injection molding machine for PET preform -Model : K-TEC250S -Manufactured year : 2006
used
full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...
used
Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930
used
Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12
used
Closing unit Clamping force t: 200 Opening path mm: 750 Holm size mm: 560 x560 Installation height min/max mm: 300 Plate size: 830 x830 Spraying unit Screw diameter mm: 60 Spray weight gr: 540 Spray volume cm3: 636 Spray pressure bar: 1575 Dimensions and weights Dimensions LxWxH m: 6.6 x 1.8 x 2.1 Machine Weight Kg: 10200 Other Battery Euromap12
used
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
used
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.
used
There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.
used
Screw diameter: 100mm, clamping force: 13.000kN, tool installation height: 600-1550mm, weight: 69t, operational hours counter: 15,460h.
used
Description: Injection unit: Size 1636, , Ferromatik multi-microprocessor control, , Screw diameter 60 mm, , Column spacing 730 x 730 mm, , Clamping surface approx. 640 x 640 mm, , Incl. handling robot, , Travel paths X approx. 1400 x 900 mm Attention! The fixed collection date for this item can only be individually communicated by the logistics department after the end of the auction and beginning of the dismantling work. Crane loading! Approx. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 2,400 mm, weight approx.: 12,000 kg
used
Brand FERROMATIK MILACRON Type EE 230-970 All-electric Year of manufacture 2008 Clamping unit clamping force 230 ton opening stroke 600 mm Beam dimension (h x v) 660 x 660 mm Installation height min. 250 mm Installation height max. 690 mm Platen size (h x v) 930 x 930 mm Injection unit Screw diameter 45 mm Injection volume 382 cm³ Injection weight PS 348 gr Injection pressure 2300 bar Dimensions and weights Dimensions LxWxH 6.7 x 2.1 x 2.2 m Machine weight 13500 kg
used
Brand FERROMATIK MILACRON Type EE 230-970 All-electric Year of manufacture 2007 Clamping unit Clamping force 230 ton opening stroke 600 mm Beam dimension (h x v) 660 x 660 mm Installation height min. 250 mm Installation height max. 690 mm Platen size (h x v) 930 x 930 mm Injection unit Screw diameter 45 mm Injection volume 382 cm³ Injection weight PS 348 gr Injection pressure 2300 bar Dimensions and weights Dimensions LxWxH 6.7 x 2.1 x 2.2 m Machine weight 13500 kg
used
Closing unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 7.5 x 2.2 x 2.7 m
used
Clamping/injection matrix Clamping force [kN] 2750 Mounting plate dimensions (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Shot weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 7,5 x 2,2 x 2,7 m
used
Ferromatik Milacron Elektra 300 S Electric injection moulding machine Machine in very good condition.
used
Machine in very good condition. The machine has 2 engines (injection and dosing) after a comprehensive service, replacement of bearings and recalibration - the cost of this service alone is almost ⬠5,000 A large part of the closing system pins is also replaced and, what is very important, the factory defect of these machines consisting in cracking of the casting body has been removed.
used
Ferromatik Milacron Elektra EE110-300 Evolution from 2006 Control panel : Mosaic Working hours 79 488 h (03/03/2021) Screw diameter : 30 mm All the information are taken from the documentation of the manufacturer (attached in the pictures). Machine in good running condition. All electric machine. Moulds running on the machine are toy moulds running ABS parts. Machine spec sheets attached.
used
Ref. no.: 17765 Producer: FERROMATIK MILACRON Year of construction: 2007 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
used
Ref. no.: 17766 Producer: FERROMATIK MILACRON Year of construction: 2008 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
used
includes FMR6-5 Robot (Wemo) X: 420mm / Y: 1200mm / Z: 2.150mm / C: 90? Rotation 1 x gripper / 1 x vacuum incl. safety fences + conveyor belt 3000 x 600 - Screw diameter: 45 mm - Clamping force: 1.500 kN - Shot weight max: 272 g - Injection pressure: 1.568 bar - Injection volume: 286 cm? - Mould opening stroke max: 440 mm - Mould height max: 510 mm - Mould height min: 150 mm - Daylight between platens max: 950 mm - Distance between tie-bars (h x v): 510 x 510 mm - Control: Endura Touch - Core pulls: 2 - Weight: 7.500 kg - Dimensions (long x wide x high): 6.400 x 2.000 x 2.500 mm