9 offers ferromatik

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 01.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 25557521
New in: 1999
used
Seller: country-at Lovric Maschinenhandel e.U.
Location: Tribuswinkel

2 - K machine

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 22.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160291335
New in: 2017
used
TOP Seller: country-pl Szczep-pol s.c.
Location: 91212 Lodz

Ferromatik Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 cc Clamping unit : Clamping force: 150 t Tie bar distance: 510x510 mm Size of the platens: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrication  ...

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151741664
New in: 1996
used
Seller: country-es Vanto Machines
Location: Barcelona

included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 159962649
New in: 2000
used
Seller: country-de JuHa Kunststoffverarbeitung GmbH & Co. KG
Price: VB 8.000 €

still in production, some tiny oil leakage 1550kn 25mm and 35mm screws 48cc and 133cc shot weight

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159145629
New in: 2003
used
Seller: country-es Vanto Machines
Location: Barcelona
Price: 39.900 €

Used machine in good condition. Available for immediate delivery. - Injection pressure: 1.817 bar - Injection volume: 2.290 cm? - Clamping force: 4.500 kN - Power: installed max: 90 + 50,6 kW - Weight: 28.000 kg

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157123266
New in: 2000
used
Seller: country-es Vanto Machines
Location: Barcelona

Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151720259
New in: 2005
used
Seller: country-es Vanto Machines
Location: Barcelona

Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159145631
New in: 1995
used
Seller: country-es Vanto Machines
Location: Barcelona
Price: 12.000 €

with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 12.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158432438
New in: 2011
used
Seller: country-de Worldplast

Year: 2011 Control unit: Mosaic Injection Unit: .../6610 Screw diameter: 100 mm Injection pressure: 1914 bar Injection volume: 3456 ccm Shot capacity: 3288 g Clamping Unit: 13000/... Clamping force: 1300 t Platen size: 2.200 x 1.780 mm Distance between tie bars: 1.670 x 1.330 mm Mould height: 600...1.550 mm Max.Daylight: 2.800 mm Ejector stroke: 300 mm Drive power of the hydraulic pump: 92.4 kW Cylinder heating power: 60.4 kW General information: Delivery time: Now Machine dimensions(m) LxWxH: 12.4 x 3.8 x 3.0 m Weight: 69.000 kg Equipment: Bimetallic injection system 4 x Pneumatic valve (NW13) 3 x Hydraulic core (NG10) 4 x • 8 x temperature controller for mould hotrunner up to 2.2 kW per control point

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online