We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed 255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...
new
New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
used
Key data: 350 Mazatrol, 365 T Plus, 12
Turning diameter: 350 mm Turning length: 365 mm Turret positions: 12 Positions ATC: 0 Number controlled axis: 0 CNC Brand: Mazatrol CNC Model: T Plus Make: MAZAK Type: Multiplex 610 + Flex GL50N Control: Mazatrol T Plus YOP: 1995 Gantry loader Flex GN50L Power 58 kW Double spindel Double turret Live / Driven tools Milling and Turning ! Max. turning Ø:350mm X-Axis: 200mm Z-Axis: 365mm Spindle bore: 52mm Speedrange: 5000Rpm Spindle power: 11kW ATC / revolver:12 Length: 7.000 mm Width: 3.500 mm Height: 3.000 mm Weight: 7.000 kg
used
1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.
used
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: Fanuc CNC Model: 160iMB MAKE Schneeberger TYPE GEMINI DMR YEAR 2007 SPECIFICATIONS Controll FANUC 160i MB Cylindical / Surface / Other 5 Axis Tool grinder Grinding length C = 240 Gr mm X - Travel X = 400 mm Y - Travel Y = 300 mm Z - Travel Z = 280 mm Electro magnetic table A = 210 x ISO 50 mm Work piece weight Resolution = 0.0001 Gr Kg Grinding wheel size 50 to 250 mm kW power on spindle 15 kW Spindle speeds / ranges 10.000 Rpm DIMENSIONS Length 4000 mm Width 3000 mm Height 3200 mm incl. FANUC loader robot LR MAte 200 iB 3 Lincl. 8 position head changer
used
1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.
used
Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines
used
K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing, performance max. approx. 2,400 kg/h, hopper capacity approx. 110 liters, electrically interlocked safety grid for hopper. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
Turning diameter: 420 mm Turning length: 2000 mm Turret positions: 12 Positions ATC: 12 Number controlled axis: 4 CNC Brand: Mazatrol CNC Model: Mazatrol Matrix Nexus CNC turning lathe MAZAK - QUICK TURN NEXUS 350-II MY CNC Lathe Ø 420 x 2.000 mm with C & Y Axis 7004 = Mach4metal Make: MAZAK Type: QUICK TURN NEXUS 350-II MY Control: Mazatrol Matrix Nexus incl SMW Autoblock steady rest incl. Radial & Axial driven tools incl. Tool eye incl. CROMAR Coolant & Chip conveyor Under power in Germany Max. turning Ø: 420mm X-Axis: 260mm Y-Axis: 100mm Z-Axis: 2.000mm Spindle bore: 110mm Speedrange: 2200Rpm Spindle power: 30kW ATC / revolver: 12 Speed live tools: 4000Rpm Pi ...
used
screw size:30 mm injection shot weight in Polysterol:100 g clamping force:600 kN screw size:30 mm max. swept volumne:106 cm³ injection shot weight in Polysterol:100 g/PS injection pressure:2.750 bar closing pressure:60 t tie bar distance:370 x 370 mm mould hight - min.:160 mm opening stroke:350 mm microprocessor control:NC4 screen text:deutsch Manual:deutsch robot interface:Euromap 12 core pull:1 x without hopper / without water distributor:-/- pump drive power:5,5 kW total connection power:45,0 kW total weight:5.000 kg :4,6 x 1,5 x 2,0 m Electric dosing: 15 kW Electric clamping: 9,8 kW Payment: 100% prior to delivery
used
Type: comparable with AZO E 800 Stainless steel, basket: L = 770 mm, D = 300 mm, with thread of range of in the Inlet area, blocking the existing VA - sieve basket = approx. 1 mm,. Length over all: 2,800 mm Height without spout funnel: 640 mm Light inlet with range thread: 800 X 190 mm Outlet hopper / transition with cone for lower grain (flour) d = 150 mm, Height: 650 mm, Oversize - transition piece on D = 200 mm, Aspiration nozzle D = 150 mm drive: SEW with 3,0 kW
used
SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.
used
Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.
new
TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...
used
TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...
new
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. . The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Model ...
K+G Wetter AW 114 Typ 271 automatic grinder, main switch and control integrated in the machine housing, surface - hopper - worm housing - worm all stainless steel, push button control, saftey grid electrically interlocked, ejection for worm and cutting set, hole plate diameter 114 mm You are very welcome to test the machine in our facility in Koblenz, Germany.
new
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class . A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Dimensions ...
used
With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable. Product hopper approx. 50 litres Performance: max. 30000 cups/h depending on the product consistency is suitable for the filling of honey, butter, jam, etc. With carton packer Hassia. Used, complete overhauled.
used
With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx. 50 litres. Capacity: 9,000 cups per hour depending on the consistency of the product.
new
Model: M130 The machine is massive, made entirely of stainless steel. Equipped with a protective cover on the neck and on the receiving hopper. The neck is massive, cast with spiral grooves. The tool set of the machine consists of a large working auger, a massive nut, knives with a cast plate Robot C4 - 2 pcs., kidneys - 2 pcs., grids of sizes: 3,4,5,5,7-8, 10 and 13 mm. , distance sleeve - 2 pcs., Mercedes - fixing sleeve The machine is extremely reliable. The electrical components and bearings used in the machine are of leading global brands. Powerful motor – 8 kW, built into the machine. There is an additional lever for automatic extraction and easy disassembly of the tools. Technical data: - neck diameter: 130 mm. – capacity of the receiving hopper 65 l. – 2 auger speeds – 5 cutting tools The machine is patented and has a CE ...
used
Karl Schnell KS FD 175 Type 112 Emulsifier, 37 kW, 175 mm, hopper capacity 140 liters, output 2500 kg/h, 2955 rpm. You are very welcome to test the machine in our facility in Koblenz, Germany.
new
Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.
used
Seydelmann frozen meat grinder GW 300, all stainless steel, for frozen block up to -25 degrees, measurements max. 900/500/150 mm, hopper capacity approx. 450 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.
used
K+G Wetter Mixer-Angle-Grinder E 130 mm type 279 with loading device, capacity of hopper (with hopper attachment) 245 l. You are very welcome to test the machine in our facility in Koblenz, Germany.
new
Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...
used
The FAM TS-1D is a transversal cutter for fluid and uniform cutting of vegetables such as carrots, leeks, salads ... • Product diameter: 90 mm for hard products and 110 mm for flexible products • The slightly angled knives of the cutting wheel guarantee a perfect cutting result. • Cut shapes: flat cut, crinkle cut, julienne slices, halved slices • Optional frequency inverter adjusts the speed of the belts and the cutting wheel. · The cutting wheel can be replaced by a "spear" type head to cut longitudinal segments. · Cutting sizes: various cut sizes possible from 1,6 mm up to 40 mm • Articulated dump hopper and easy-to-disassemble covers give access to the product and transmission areas. · Infeed belt ± 1.400 mm
used
+ G weather mixing angle Wolf G 160 mm type 449 with loading, mixing unit with mixing screw and paddle mixing shaft, hopper capacity (the Ausf. Funnel attachment) 245 litres. Gladly we invite you, to visit the machine with us in 56070 Koblenz.
used
Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car; NEW
used
Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...
used
Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...
used
Sprueh cleaning system for small to medium batches, for workshop, maintenance or interim cleaning, cleaning with hot water, spruehkabine as top - loader abhaenging of model: basket diameter 820 - 1250 mm, load capacity 80 - 300 kg, spruehdruck 1.8 - 3.5 bar, heating 4.5 - 12 kW, optional: thermostat 0 - 90,Timer, oelskimmer, filtration, be- and unloading trolley; optional: thermostat 0 - 90,timer, oelskimmer, filtration, be- and unloading trolley; New
used
BAUMANN GX 60/14/45 L DIESEL side loader forklift was manufactured in Italy in 2015. The machine’s structure equipped with a platform, allows the easy and comfortable transportation of long and oversized loads weighing up to 6 tonnes. Goods placed on the platform are lifted to a height of up to 4500 mm, using a double mast with forks having a length of 1400 mm. The platform side loader forklift powered by a PERKINS 1104D-E44 diesel engine with a power of 64.5 kW accelerates to a maximum speed of 30 km/h. The machine has a current periodic inspection valid until 03.2023, an UDT inspection book and technical documentation. The total weight of the forklift is approximately 9000 kg. Specification of the BAUMANN GX 60/14/45 L DIESEL forklift - load capacity: 6000 kg - maximum lifting height: 4500 mm - fork length: 1400 mm - fork width: 200 mm - fork thickness: 50 mm - fork travel: ...
used
Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Barth Type : NR 3000 batch roaster Year of made : 2000 Output /h approx. : between 800-1250 kg Nuts Consisting off : Plant components: - Hopper for nut roasting machine NR 3000 (650kg whole nuts), with scale - Nut roasting machine NR 3000 batch size 400-620kg/batch, roasting time 20-40min) - Roasted air conditioning - HWP cooling system - Cooling air supply - increased stand frame - aspiration device stand frame - aspiration device cooling zone - thermal exhaust gas cleaning system TNV 8000 (8000m³/h, residual content in the clean gas 50mg/C/m³) - Exhaust pipe TNV - free-standing 2-way steel chimney system (height 21500mm, outside diameter 1450mm, 2 pcs. Stainless steel inner pipes 500mm) with thermal insulation - Fully automatic control unit As well as all pipes, p ...
used
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer
TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox ...
used
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer; New
TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body ...
used
Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.
used
Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...
used
100L stainless hopper, adjustable fill size on mobile stainless frame
used
Depositor "Tromp" Type : 180.02.076 all stainless steel for liquid and semi-liquid products with hopper with servo-engins 2-head-outfeed programmable EN - DE – NL passage Max. 15 mm cylinder max. 500 cc digital - touchscreen mobile dimensions (l x w x h) : 1.400 x 800 x 1.500 mm y.o.c. 2000
used
Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden ...
new
Application: Picture frames, window construction, prefabricated houses, glass strips, hollow-throat strips, interior fittings, skirting boards, door construction, decorative strips, decorative profiles, etc. For Brads (compression head pins) of type "J" from 16 - 50 mm Technical data: - release protection - side loader magazine - setback-free - silencer - weight: 1.25 kg - working pressure: approx. 4-7 bar - air consumption: approx. 0.7 l / nailing Delivery in a plastic case
used
Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.
the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel
This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.
used
This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.
used
Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.