We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
10 s/s manual mobile infeed hoppers, dimensions: (10x) 1200 mm x 800 mm x 1150 mm.
used
Stainless steel hopper Pendular mixing
used
Type: Hopper and Rotary vane Materials: stainless steel (hopper) Nominal diameter: 600 mm. Motor power: 0.37Kw Pneumatic transfer Useful tank volume: 230 L
used
2 s/s infeed hoppers for powder dissolver, on Sartorius weighing cells, volume: 1200 liters each, vibrating motors, dimensions: (2x) 1400 mm x 1300 mm x 2450 mm. Including s/s platform, dimensions: 2350 mm x 1800 mm x 1950 mm.
used
2 s/s infeed hoppers for powder dissolver, volume: 1200 liters each, vibrating motors, dimensions: (2x) 1400 mm x 1300 mm x 2450 mm. Including s/s platform, dimensions: 2350 mm x 1800 mm x 1950 mm.
used
Application: Powder receiver filter. Stainless steel unit with external part in stainless steel 1.4301 for feeding and dosing powders by depressurization. This equipment can be used as a hopper in a conveying system where the filters allow the separation of air / product (powder). ASSOCIATED MATERIALS: Aerzen GM7L / Infastaub MKR 0-1/20 - Blower + Filter. 1 - UEB 800 Eco jet filter, vacuum tight Filter surface: 14,0 m2 Filter material: FM02 Depressurisation: 500 mbar ATEX classification Sold with new filters. 2 - 0.4 m3 hopper with tangential inlet. 3 - Level sensor RN 3001A (Atex) Execution : rotary vane 4 - Rotary valve A1 250/10 WC-II Dosing capacity: approx. 3000 kg/h Power: 0,55 kW ATEX classification 5 - Pneumatic closing valve Nominal diameter: 250 mm 6 - Down pipe with compressed air injection system on the sides. 7 - Pneumatic ...
used
Type: 3-wheel mobile hopper Emptying: butterfly valve Volume: 250 L Materials: stainless steel Quantity: 9 units
used
Geroldinger feeding station with electric heating and cell feeder.
used
Used hopper truck MAC with CMF
used
Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel
used
Hopper,plastic,standing in stainless leg frame,Ø 760 mm.
used
Hopper,plastic,open with lid,standing on stainless leg rack,Ø 750 mm.
used
Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!
used
Mobile depositor with 2 mobile infeed hoppers, dimensions hoppers: (2x) 880 mm x 880 mm x 850 mm, diameter pipe: 30 mm, dimensions depositor: 800 mm x 1500 mm x 1260 mm.
used
Width 1.4 m Heigth 2m Length 4.5m More then 300 machines new and second hand on our seema .de
used
Breite 1.2 m Höhe 2m Länge 4.6m More then 300 machines new and second hand on our seema .de
used
OHK Stainless hopper and screw ModeL: BTO Stainless 300Kg hopper with twin screw discharge, 200mm screw diameter, 3Ph
used
Winkworth hopper / feeder stainless 100L hopper with single shaft paddle agitator, screw fed discharge, mobile
used
Concrete distributor company Schwinghammer Austria, year of construction 1995, 12 KW
used
used
O&K feed hopper with vibrating channel Brand: O&K Germany Dim. bunker : 6700 x 3000 x 1400 mm. Trough: length 5000 mm - width 1200 mm. Drive: 2 vibration motors of 7.5 kW each Total height feed hopper with vibrating channel: 3000 mm.
used
- Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm
used
Capacity: 15 cbm with dosing belt new control box Steel skid frame with approach plate
used
Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction
used
Chip hopper, chip trolley, mobile PAGUS approx. 20 litres internal dimensions: length: 630 mm width: 310 mm depth: 50 / 190 mm edge height: 440 mm Material: aluminium ( frame ), Steel ( tub ) 2x fixed castors, 2x swivel castors used, tested ! Dimensions 1080 x 400 x 1010 mm
used
Pre-Portioner/Hopper Year of construction not known Funnel for approx. 120kg dough Sliding opening 30x60cm Inner hopper height 60cm Funnel dimensions at the top approx. 100 x 100 Funnel height top 250cm Funnel height bottom 190cm Gate valve electrically operated (230V connection) mobile
used
Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: simar, granulate conveyor vacuum conveyor with 2 hoppers -Type: F2582 -Item no.: 10-02082 -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 870/710/H1430 mm -Weight: 80 kg
used
- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm
used
ID2713 Feed hopper incl. take-off chute and conveyor belt Feed hopper including discharge chute and conveyor belt Feed hopper including discharge chute and conveyor belt, (1400 mm wide, approx. 110 m long), some straps are still available on a roll Feed hopper incl. take-off chute and conveyor belt (1400 mm wide, approx. 110 m long), belts are partly still available on rollers
used
EMCO - Loading arm 4 inches - used - as spare part carrier
used
used
used
used
Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg
used
Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg
used
blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rotary vane vacuum pump /// oel circulation lubricated Manufacturer: Busch Type: RC 0100B End pressure: approx. 20mbar suction power: approx. 100m3/h Status:Generalueberholt If you have any questions about this information or general questions about vacuum generation, we are happy to provide you with your services;
used
Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch
used
for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg
used
was connected to Gildemeister GMC 20
used
YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr
new
new all stainless steel discharging height ± 1.770 – 2.250 mm mobile
new
NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm
used
Capacity: 4.000 crates / h (at palletizer / depalletizer) Presently equipped for: Bottles: 0,50l GdB Kropfhals 0,70l Zwiebelhalsflasche 0,75l Heilwasserflasche 1,00l GdB Leichtglasflasche 1,25l GdB Leichtglasflasche Crates: GdB crates with 12 bottles, short side leading GdB crates with 20 bottles, short side leading Pallet: EURO pallet 1200 x 800 mm consisting of: 1 Depalletizer make: Kettner type: Pressant Duplex 2NT 1136 year: 2000 1 Palletizer make: Kettner type: Pressant Duplex 2NT 1176 year: 2000 1 Pallet Pressure Control make: Kettner year: 2000 1 Empty Pallet Magazine make: Kettner type: ST year: 2000 1 Empty Pallet Magazine make: Kettner type: ST/EST EURO year: 2000 1 Pallet Destrapper make: Born type: PAE year: 1986 Crate Conveying System make: Krones type: Multico ...
used
Spindle circle 165 mm Interface Gildemeister GM 16 AC
used
- year of production 2017 - hour meter reading 2770 mth - road lighting - Rear view camera - Work lights - 55 kW (75 hp) engine at 2200 rpm, 400 Nm torque at 1300 rpm - maximum lifting capacity 4000 kg - maximum lifting capacity at a maximum extension of 1250 kg - raised boom 13.78 m - hydraulic system pressure 260 bar -poppy. Pump flow 110 l - Torque converter, 4-speed powershift transmission - travel speed 29 km/h - servo-assisted service brake, hydraulic - Front work light - rotating warning indicator - Tires in very good condition - Electrical drive control - Front axle differential ratio - Windscreen and upper window cover -air conditioning -Leveling - 3 steering modes - on-board computer
used
Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg
used
If you are interested, please write
used
Loader,stainless steel,GEA/Scanio type K16,for lift and unloading of max 1.000 kg. vats.
used
Loader,stainless steel,GEA/CFS type 1200D,for lift and unloading of max 1200 kg vats.