hopper loader used for sale

Mobile loader,stainless steel,Meattec,For lift/tipping of Vemag bins.

Mobile loader,stainless steel,SFK-Danfotech CH 300,for lift/dump of Vemag bins.

Loader,stainless steel,Beritech type berilift for lifting/emptying of Vemag wagons.

Loading caterpillar Hanomag D 600 functional, top engine

Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear

Pallets are checked for damage

JCB - Wheel Loader with Hydraulic - Quick Coupler Bucket with undercarriage knife 0.8 m³ + pallet fork, All-wheel drive, wide tyres Trelleborg 400 Agro Year of construction 2018, operating hours: approx. 380 Power: 37 kW (50 HP)

loading magazine for Tornos SAS16, like new -unique offer- This loading magazine CUCCHI GIOVANNI Mod. DBM 17/36 is built for use on a Tornos SAS16, but only used ½ year. The year of manufacture of the loader will be 2022/23. Secure this unique offer at top conditions! bar length 3,30 m incl. remote maintenance; control voltage 24V Standard paint RAL7035 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: loading magazine for Schütte AG20 Manufacturer: Pietro Cucchi Type: surface loader year of construction: 2000 for bar length 3000mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Rod diameter 65 mm rod length 3200 mm

IRCO Profimat 65.6/196.6

Bar diameter: 25mm, max. bar length: 4200mm, with synchronous device, available in the end of 2023.

Max. bar length: 3000mm, weight: 900kg, the machine is wrapped in foil and not in use.

Motor power: 234kW, weight: 38t, operational hours counter: 25,323h, an inspection is possible.

Max. load: 5t, length: 2205mm, width: 550mm, height: 600mm, weight: 250kg, an on-site inspection is possible.

Load capacity: 1400kg, load capacity with COG (load center of gravity): 600mm, Lifting height: 6510mm, weight: 3356kg. Including one defective battery. Forklift in working order without UVV. Documentation available. On-site inspection is possible.

refurbished bucket for wheel loader CAT980G, Width 3,600 mm, capacity 5.1 m³, Cut new,

weight: 14 500 kg : . : DEUTZ 6 Zylinder Turbo : 45 km/h motor capacity: ca. 200 PS Number of working hours: 11 000 h : 20% : . : . : Erdschaufel ca. 3 cbm : Kranarm, Palettengabel : Bundeswehr The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loader caterpillar manufacturer Liebherr, type LR634, year of construction 2007 Drive 80%, with pressurized cabin, operating hours: 6700 Ready for action...

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Wheel loader LIUGONG 856 H, year of construction 2021, Operating hours: 170 with hydraulic quick coupler and 3.2 cbm shovel -Price on request-

bar diameter 65 mm bar length 3000 mm

TECHNICAL SPECIFICATIONS Designation: Concrete ramp Version: mobile, 2-piece Weight: approx. 5 t per block Slope: 15° Transport dimensions per block (length/width/height): 4,470 x 1,200 x 1,000 mm SPECIFIC COMMENT - Mobile ramp system to increase the discharge height - Mudguards at the tips - Metal construction fixed to the blocks for securing

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

Number of working hours: 3336 h : 55kW/2400 rpm serial number: 8CU4465 bucket: Klappschaufel 0,75m³ : Gabelträger : . weight: 5630 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Was fitted on a Gildemeister Sprint 65

FMB turbo 5-42/ 4200 Year of construction: 1998 Version for 4m poles previously installed on a grape without syncron unit

LNS Tryton 112 Year of construction: 2004 Hybrid drum: 7/ 12 channels

Wheel Loader Komatsu 103 KW Engine type S6D102E Tire 20,5-25 4 x Good Central lubrication system Hydraulic quick coupler Shovel knife as good as new Width 2.54 m Capacity 2,1 m³ Length 7.06 m Width 2.45 m Height 3.25 m

Rod diameter 5-102 mm Rod length 1600 mm

Kettner Year of construction: 1987 Pallet magazine Control: Siemens S5 2 pieces : 3000 EURO each

- Rod length: 3000 mm - Total power: 1 kW - Machine weight: 800 kg - Dimensions (W x D x H): 4.7 x 0.5 x 1.3 m Details Guide tubes 10 and 25 mm, was mounted on an EMCO lathe ET242 Accessories Documentation

Key data: 5 mm, 3 mm

General: Year of construction 2013 Bar length 3.0M 3.200 mm Rod diameter 5 – 51 mm Overall length 4,060 mm Weight approx. 760 kg

- Guide channel in oil-damped design, - was attached to TRAUB mechanically - Installed guide channel D 28 mm - Material slider length N - max. bar length 3,200 mm - Centering device - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Transomat Loader TRE RSL 160-7S - Application area: min. 450x500mm; max. 1.640x1.220mm - Layer height: max. 165mm - Lifting height: min. 170mm; max. 1,650mm - Load capacity: max. 300kg - Voltage: 400V/50Hz/3~ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

ID2982 Manitou MT1745 year/Year of construction 2004 approx. 7000 hours/hours Telehandler, with 2 outriggers, with fork telescopic handler, with 2 outriggers, with fork

The wheel loader has a low mileage for its age and is started regularly to avoid standing problems. Included in the price is a fork, the folding recess would also be available as an option.

3 pieces available : 2 new in 2017 (serial no. 174268-174269) 1 new in 2013 serial no. 173061 - all three barfeeds were fitted to Citizen L12

Description: • Serial number 2046 • Standard tires 29.5 R25 • Bucket width 3480 mm • Standards bucket capacity 4.80 m³ • Steering type AL • Maximum Speed ​​35 km/h • Maximum pouring height 3100 mm • Lifting power 264 kN • CUMMINS QSM11 engine: displacement 10800 cc, power 250 KW • Working hours according to meter 16500  ,  ,IMPORTANT: , , The customer is responsible for all the loading related to the equipment. , Dimensions and weights are approximate. , , Approx. Onsite Dimension. (l x w x h): 9,320 x 3,210 x 3,800 mm, weight approx.: 29,800 kg

If you are interested, please feel free to write

For more information, please write to

Vorstapeleinrichtung - Pre Loader ALBO System AB S-517 Serial-No. S-517 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996

Inv. Num. : 5413 Type: SN 542 Producer: FEDEK Created: 2008 Parameters: Maximum bar length: 3000 mm Rod diameter: 42 mm Weight: 800 kg Length: 4000 mm Width: 1000 mm Height: 1500 mm

Description: Serial number: 156839 Bar length: max. approx. 1040 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 1,900 x 1,350 mm, weight approx.: 400 kg

Description: Working area: X-axis (cross slide): 250 mm Z-axis (longitudinal slide): 350 mm Rotation diameter over cross slide: 204 mm Three-jaw chuck Outer diameter: 140 mm Turning diameter: 120 mm Working spindle: Spindle head: DIN55021 A5 Bar passage with hydraulic clamping: diameter 42 mm Feed drives: Feed force X-axis: 2600 N Z-axis: 3200 N Rapid traverse speed: 10 m/min Main drive, direct current Power: from 2350 rpm: 12.5 kW Speed range: 100 - 6000 rpm Tool carrier: Disk turret: 12 stations Turret: Manufacturer: SAUTER Type: 0.5.901.016 Turret can accommodate driven tools With bar loader Max. Bar length: approx. 1000 mm With spare parts machine Manufacturer: EBOSA Type: 143 (see pictures) With technical documentation as shown in the pictures Important note: Bar feeder is delivered without bar material. The bar material shown in the pictures is not included in the scope of delivery ...

Description: Manufacturer: probably EBOSA Max. bar length: approx. 1000 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,550 mm, weight approx.: 400 kg

Used, functional crawler loader. Fiat Allis FL 5 In need of repair. Seat, 2 windows broken.

Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996