hopper loader used for sale

Briquette Press Briquetting Press Chip Press Pressing unit without feed auger/hopper WEIMA TYPE: TH500 Briquette diameter approx. 50 mm Hydraulic engine power 7.5 KW Pressing capacity approx. 800 Kg/h Here you bid on the complete press including control without feed screw and bunker. Machine was connected and test run, pump and cycle work perfectly. Wiring diagram is also available. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information subject to change. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packing can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

COMBINATION OF FLOUR MILL AND FLOCKERIn the combination appliance is equipped with the two classics FIDIBUS MEDIUM and the FLICFLOC. In the FLICFLOC, two cone-shaped and naturally nickel-free stainless steel rollers rotate in high-quality ball bearings ? And that almost by itself. The mill has a 360 watt industrial motor and self-sharpening millstones made of corundum ceramics that grind 100 g of fine flour per minute. Whether green spelt, chickpeas or rice? 850 g of grain fits into the hopper. Enough to prepare 1 kg of wholemeal bread. The funnel of the flaker holds up to 190 g of oats and conjures up flakes for your morning muesli in no time at all. 360 watts, grinds 100 grams of wheat per minute several times the amount at a coarser setting? Hopper capacity: 850 g (wheat/mill), 190g (oats/flocker)? Grinder: Corundum/ceramic infinitely adjustable? Grinding fineness Air jet screen metho ...

ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW

COMBINATION OF FLOUR MILL AND HAND FLOCThe combination device is equipped with the two classics FIDIBUS 21 and the FLICFLOC. In the FLICFLOC flaker, two cone-shaped and naturally nickel-free stainless steel rollers rotate in high-quality ball bearings ? And that almost by itself. The flour mill has a 250 watt industrial motor and self-sharpening millstones made of corundum ceramics that grind 100 g of fine flour per minute. Whether green spelt, barley or spelt ? 850 g of soft cereals fit into the hopper. Enough to prepare 1 kg of wholemeal bread. The funnel of the flaker holds up to 190 g of oats and conjures up flakes for your morning muesli in no time at all. 250 watts, does 100 grams of wheat per minute grind several times the amount at a coarser setting? Hopper capacity: 850 g (wheat/mill), 190 g (oats/flocker)? Grinder: Corundum/ceramic infinitely adjustable? Grinding fineness Air j ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Lauenstein Wernigerode Type: T3 antique screw tempering machine YOM 1935 Output: bis zu 400 Kg/h / approx. 400 kg/hr different: Untampered original condition flat Belt drive Tempering unit complete with water jaketed and agitaded chocolate hopper Electrical cabinet is Original At the moment we rebuild this machine in original condition We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

Double sided round end tenoner Balestrini mod. TTSA Description:  Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

PET Preform Injection Molding Machine Production Line with Complete Peripherals Manufacturer: HUSKY Type: GL 300 PET P85/95 E100 Year of construction: 2000 Condition: Very good - refurbished by the manufacturer Husky in 2020 / Encore 2.0 / ProAct Program Equipment / Peripheral: Picking robots: -Husky FSI200GL300 - Refurbished in 2018 Packing unit: Soft Drop System with Turning Plate for Mesh Boxes Granule drying conveyance consists of: - Piovan Easy 3 - Piovan DP 621 Dry Air Dryer with Molecular Sieve Towers - Year of construction: 2006 - Piovan TN 800 Hopper 800 dm3 - Year of manufacture: 2006 - Piovan F48/2 suction delivery unit / vacuum pump - Year of manufacture: 2010 Tool Dryer / Mould Dryer: - Piovan RPA1800 Year of manufacture: 2016 Tool Temperature Control Device: - Moldmasters M2M Year of manufacture: 2015

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 36 mm max. module: 1.00 Workpiece length max.: 80 mm Pitch min.: 6 max.: 200 Axes distance between work- piece and tool: max: 30 mm Gear hob: max. diameter: 36 mm Max. milling cutter displac.: 50 mm Milling cutter speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.60 HP Total power required: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 780 mm Width: 730 mm Height: 1380 mm Various accessories: Loader Wahli Type: 41 W Lamp

Automatic mixing grinder, meat grinder, mixed meat grinder Capacity approx. 2000kg/h Hopper volume: 120l incl. mixing device incl. perforated disc with 4-blade knife

Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central  ...

Key data: 460 mm, 400 mm, 460 mm

Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 21070 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23009 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 1 consisting of: 1 acceptance funnel 1 Armbruster destemmer with 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 12.5 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2004 - Capacity: approx. 3300 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2600 x 1600 x 1250 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2004 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Worki ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 2 consisting of: 1 acceptance funnel 1 Armbruster destemmer 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 8 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2001 - Capacity: approx. 3500 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2950 x 1660 x 1000 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2001 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Working princ ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23805 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

Type: S 250 l 2P Complete stainless steel Hopper capacity 250 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 2.2 kW + 2.2 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of the machine in cm: Width: 155 Lenght: 70 Height: 105 Delivery time: after advanced payment, one working day

This MORI SAY 8/42-S (1999) lathe was made in the year 1999. Includes a PIETRO CUCCHI bar loader mod AN-BN. The machine has a hinged belt chip conveyor.

This STAR SR20JN Swiss Type Turning was manufactured in the year 2013 in Japan. It is equipped with a CNC control Fanuc 31i-B and has a C-axis on main and counter spindle. A FMB-Loader is included.

Maximum diameter 25 mm Number of tools 6 Type of CNC Siemens 840D Spindle speed 6000 rpm Spindle power9.1 kW Weight 7500 kg COMPLETE WITH BAR LOADER IEMCA SIR 25 YEAR 2005

USED STAINLESS STEEL GLATT LABORTECNIC TR160-02 CENTRIFUGE SCREEN REF#: C6696 Centrifugal sifter machine model TR160 / 2 manufactured by GLATT LABORTECNIC. Parts in contact with the product made of stainless steel. General characteristics: Manufactured by GLATT LABORTECNIC Model TR160-02 Material Stainless steel Year built 1985 Feed hopper diameter: 300 mm Discharge diameter: 140 mm Transport dimensions: Base: 1000x800 mm Height: 1500 mm Technical characteristics: Motor characteristics: Power 2.2 kW Rotational speed 330-2000 rpm

Holtrop Jansma clean air extraction with rotary lock, fire protection device, autom. Fire extinguisher & fire damper Brand: Holtrop Jansma Type: MSO400 ZRSL Year of construction: 2022 M-No.: W0061083B, Clean air extraction: MSO 400ZRSL Intake manifolds: ø400 mm Length: 3,650 mm Width: 1,230 mm Height: 3,270 mm + 1,500 mm Weight: 1,000 kg Capacity: 11,000 m³/uur Pressure: 1,965 Pa Power supply: 11 kW, 380V, 3Ph, 50 Hz Filter surface: 69 m2 Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Return air duct: 500500 mm Noise: 80 dB(A) Flame Protection Fire Extinguishing Device:: Includes: automatic powder fire extinguisher Automatic flame protection flap in the return air duct automatic shutdown of the fans Check valve in the intake line Vibrating device: Incl. programmed Switchboard Turnstile: DRSL-3000 Dimensions of di ...

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Vibrating de-duster,stainless steel,vibration shoot,with 50 l. hopper and net.

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

We have 3 pieces in stockFor setting down bread and rollssuitable for oven loaders and feeding tablesfor net belt and reversing ovensfor deck ovens with pull-out cookersmade of stainless steelOn roller trolleys Dimensions : W: 231cm D: 70cm H:188cmPeeling dimensions : W: 207cm D: 56cmSee picture for details

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Distance between grinding wheels: 0 mm Grinding wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. work-piece height: 80 mm Grinding width: 40 mm Grinding wheel: outside diameter: 400 mm inside diameter: 250 mm Width / height: 50 mm Grinding wheel right side: Grinding wheel speeds: from: 134.5 rpm up to: 1435 rpm Peripheral speed: 24 m/s Grinding weehl left side: Rotation speed: 1150 rpm Peripheral speed: 3 - 30 m/s Feed range: 26 - 246 mm/s Voltage: 380 Volt Total installed power: 30 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 3300 mm Width: 2600 mm Height: 2300 mm Dimensions electric cabinet: Length: 1800 mm Width: 400 mm Height: 2000 mm Various accessories: Coolant system Wheel trueing attachment Measuring instrument: IONIC Workpiece loader Automatic loading and unloading uni ...

REF-2495 FAM FLEXIFAM SLICER-DICER The FAM Flexifam is a cutting machine suitable for cutting into slices, strips and dices. Mainly made of stainless steel with the exception of some pieces of the drive. The chassis, the lamination of the plaques, the feed hopper and the outfeed hopper are completed with glass microspheres. The three-dimensional cutting operation ensures the perfect uniformity of the product. Brand: FAM Model: Flexifam Machine no.: 6700/2007 Year of manufacture: 2007 Three-phase. 400 V. 50 Hz. 20 A 5.5 kW/7.48 HP Throughput: 2,000 kg/h Dimensions: width 1,747 mm; length 1,066 mm; height 1,555 mm Weight: 550 kg Complete with one cutting head: 3 mm dices or 8 mm dices (choose one)

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 805 (Hardware 80310, Software 4.1) Technical data Max. work piece diameter: ca. 20 mm Workpiece length max.: 100 mm Motor capacity: grinding spindle: 0.5 kW Voltage: 380 Volt Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1750 mm Width: 1400 mm Height: 2200 mm Various accessories: Dust extractor Automatic extruder Security-protection panel Workpiece loader Workpiece conveyor

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

KOMO MAGIC FLOUR MILL By the way, the grinder (grinding chamber and grinding stones) of the Magic flour mill is interchangeable. With the interchangeable grinder, which is available as an accessory, you can turn the flour mill into a spice mill.The most important facts at a glance:250 watts, grinds 100 grams of wheat per minute at a coarser setting several times the amountHopper capacity: 850 gGrinder: Corundum/ceramic infinitely adjustableGrinding fineness , solid beech, treated with natural vegetable oils and stainless steel>, hopper and flour spout made of stainless steel>, hopper lid: solid beechVolume at ? Fine?: approx. 70 dbCable length: 1.5 mWeight: 6.6 kgHeight/width/depth: 25 cm/ 16.3 cm/ 20.3 cmStorage height for bowl: 13.8 cmGluten-free ground on requestOn request with 110V motorPerfect for a household size of 1-2 peopleThe high quality of our industrial motors is additionall ...

5 Color Straight+ Coating + Extended Delivery Year: 10/2004 (Post Drupa model) Max. sheet size (mm): 530 x 740 Number of impressions (mio): 130 Pritnting stock thickness from 0.03 mm to 0.8 mm - Prinect CP 2000 Center - Axis Control - CANopen - PPF Preset Plus Feeder - Pre loader - Suction feeder table - Double sheet control - Steel plate in feeder - AutoPlate - Alcolor Vario dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - CombiStar Technotrans - Ink temperature control - CoatingStar - Water base coating Tresu chambered doctor blade - IR CANopen DRY STAR 3000 + hot-air Dryer in delivery - PPD Preset Plus Delivery - Extended delivery (X2) - PowderStar AP - CombiAirStar -Free of damages or repairs on cylinders - Cleaned, checked and sprayed

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Powder and seed doser - 0.5 - 15kg Quenard Soret Stainless steel frame with height-adjustable bag holder 100-liter primary hopper - Weight doser with 2 load cells )Capacity from 309 to 1kg in bucket with chute )Capacity from 1kg to 15kg on weighing pan 20-program PLC Food-grade stainless steel parts in contact with the material -Pedal or automatic cycle start -Production up to 600 b/h depending on volume -220 v and 5 bar power supply

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Description Granulator Solid Rotor Knives 3 + 2 still Total Power 35 kW Feeding hopper 320 x 820 Rotor diameter 260 Rotor Length 600 OVERHAUL 2015

Description Folcieri GRANULATOR Rotor Diameter 530 Rotor Length 1000 Hopper dimension 1000 x 700 Knives 3 + 2 Screen 12mm Motor 110 kW Fan Soundproof booth 3 spare set of blades and acounterblades

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Description Motor: 30 kwWorking hours: about 50open hopper: 1500 x 150height of the feeding hopper: 1700 mmNo. of mobile blades: 5cutting profile width: 1500 mmGround material: polyethylene sheet (LDPE)Weight: 3500 kg

Description gravimetric dispenser production: 292 Kg/h hopper capacity: 2 x 25 lt single 1 x 50 lt double - all without reducer power supply: 220 V - 0.3 Kw