hopper loader used for sale

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

Peforated disc mill Manufacturer: Fryma Type: ML 180 No.: M10451 Power: 7.5 kW with hopper (volume: ca. 100 l) with feed screw (speed-controlled) on mobile cart with control cabinet LWH: 800 x 700 x 2400 mm Weight: ca. 250 kg

Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product weight: 250 g Hopper with 2x screw augers Aluminium hopper and augers & Stainless Steel Hopper Condition : Good

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

The unit is suitable to pack blisters in PVC + Aluminum, Aluminum + Aluminum, Polypropylene, PET and PVC, Aclar, COC. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very easy to clean. This machine is equipped with various safety devices to protect the operator. Product parameters can be recalled from a PC, for a quick and easy format change. Reel unwinder driven by a Brushless motor, with automatic machine stop at reel end. Film splicing table equipped with integrated cutter, and automatic vacuum. Forming station entirely managed by Brushless motors. Self-aligning pre-heating plates, independently motorized. Film positioning driven by Brushless motor. Automatic Pitch adjustment directly from the display. Loader trolley MS170 with a maximum load of 300 kg. Dedicated product feeder and relevant enclosure easily remov ...

Rye bread divider. Weight range per piece: 0,4-1,2 kg; Capacity: 10-30 pcs/min ; Large hopper for 300 L; With 3000 mm conveyor and tin sensor; The divider is new. Client refused because of small amounts of dough.

Turbo systems stainless depositor Stainless height adjustable frame, 25Kg hopper with lid, variable speed, foot pedal operated,

The T300 tablet press is a rotary press that compresses solids and is equipped with 40 punch stations. The exact characteristics of the press machine vary according to the type of punch chosen. Technical data: Length mm 1280 Width mm 865 Height mm 1850 Net weight Kg 1920 Power A 12 Frequency Hz 50 Voltage Volt 380 Productions characteristics: Machine speed 260,000 tablets / h Max. tablets diameter 13 mm Filling depth 2 – 16 mm Min. production 12,000 tablets/h Max production 300,000 tablets/h Mould external diameter 24.01 mm Mould height 22,22 mm The T300 is a rotary tablet press equipped with two pairs of pressure rollers, one for pre-compression, the other for main compression. The operator side of the press is mainly in the front part of the machine where the four manual wheels, the control elements and the console are located. The press is fed from the top, ...

The Swiftcheck is designed to feed and count any size, shape or quantity of tablets without change parts, and is the ideal unit to serve as a line monitoring machine to check the count accuracy of filled containers from the packing line. The system is simple to operate and easy to clean. Technical data: Length: mm 575 Width: mm 200 Height: mm 600 Designed for ease of operation and simple setting, the Swiftcheck incorporates a similar microprocessor package to that used on the high speed counting machines, achieving the same high level of accuracy and reliability. The basic unit comprises a stainless steel cabinet with integral micro processor control system, 5 litre product hopper and vibrator feed arrangement with variable vibration control, quick release twin-track feed tray and contact parts, stainless steel outlet funnel and clear plastic dust cover.

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Head machine Kemper Soft Star -6 in a row -with plastic dough hopper -with Siemens Touch Panel control -Built 09/2007

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

This Qualicaps inspection machine combines computer image processing technique and CCD line sensor camera to capsule rectification-transfer mechanism. The appearance of the capsule is inspected by direct image capture with the camera, controlling its orientation and rotating the capsule during intermittent transfer. The machine controls filled hard capsules directly on the line by meticulous examination of pharmaceutical or nutraceutical products. It allows accurate inspection of capsule appearance performed by color line sensor cameras with the possible immediate expulsion from the production line through an appropriate rejection system, when the machine detect itself anomalies on the product. Technical data: Dimensions mm 2000 x 700 x 2450 Total weight Kg 1000 Voltage Volt 400 Frequency Hz 50 Production characteristics: Capacity 50,000 capsules/hour Compatible capsules: ...

aircraft piston compressor Mobilboy 301/50 AC Product name: Reciprocating compressor Mobilboy 301/50 AC Manufacturer: Aircraft Item number: 2004304 Year of construction: 2023 Condition: New device Technical details: • Maximum flow rate: max. 240 l/min • Hopper volume: 50 l • Filling capacity: approx. 150 l/min • Maximum pressure: 10 bar • Sound power level Lw: 96 dB(A) • Cylinders/Stages: 1/1 • Weight: 36.5 kg • a one-hand quick coupling • One pressure gauge each for working pressure and container pressure •Reducer • Powder-coated boiler • Automatic pressure switch • Connection cable length: 1.8 m Engine data: • Power drive motor: 1.5 kW • Power supply: 230 V / 50 Hz • Speed: 2850 min-1 Transport dimensions: • L x W x H: 790 x 330 x 725 mm Our price: €229.00 (EUR) plus VAT from Grunow (Brandenburg) (Subject to  ...

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

Key Vibratory conveyor Stainless vibratory conveyor, internal dimensions 1800mm x 650mm, hopper height 1550mm, discharge height 850mm, 3Ph

Mori Seiki NT 1000 multitasking lathe :::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC Version: Mapp - Spindle Nose: ASA 5 - Spindle Power: 11Kw - Main Spindle Speed: 6000 Turning diameter: 370mm - Self-centering diameter: 210mm - Bar passage: 42mm - Turning length: 424mm - Number of tools: 90 Tool holder: CAPTO C4 Spindle speed: 12000 X-axis travel: 380mm Y-axis travel: +105 -105mm Z-axis travel: 460mm Swivel B-axis travel: +120° -120° degrees Rapid feeds linear axes X Y Z: X 40 Y 40 Z 50m/min High refrigerant pressure: yes Pressure value: 50bar External tank system with filter: yes Number of Tool Turrets: 1 Number of first turret tool slots: 10 Number of fixed tool positions in the first turret: 10 First Turret X-Axis Travel: 155mm First Turret Z-Axis Travel: 610mm Sub-spindle: yes Sub-spindle speed: 5000 Sub-spindle power: ...

• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14

Complete material loader and colouring machine with control

Brand: Lisec Type: Washing machine, Vertical Model: VHW-25 V8 Serial Number: 315-051324 Construction year: 2009 Weight: 4,855 tons Power: 63 KvA Air pressure: 6 Bar Waterpressure: 2,5 Bar Length mm: 7750 (3,25+ 3,50+ 1,10) Width mm: 2000 Height mm: 3550 Working height: +/- 530 Transport size: L x W x H: Low loader or in consultation Min.-max. glass thickness: 3-25 mm Min.-max glass size: max. 2500 x 300 Number of brushes: 8 brushes Condition machine : Very good condition Control type: B&R Electric. Connection: 400 + N Documentation: Can be requested from Lisec Instructions: Can be requested from Lisec Electric diagram: Yes Parts list: Can be requested from Lisec Available software: Back up available Photos/film available: Photo's and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting ta ...

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

1 new funnel hacker DH 800 - 30 KW Rotor width 800 mm Rotor diameter 400 mm Number of knives 46 / concave sanded / quadruple rotatable Engine power 30 kW Electrics 400 V , 50 Hz Control control cabinet, blower cooled, with SIEMENS PLC Funnel opening 800 x 1300 mm (option: 1300 x 1750 mm) Funnel volume approx. 1.16 m3 (with hopper extension approx. 1.7 m3) Sieve as desired, 10 - 50mm Hydraulic 60 litre tank, external gear pump, oil cooler optional Dimensions ( LxWxH ) 2620 x 1738 x 1830 mm Weight approx. 3400 Kg (with hopper extension approx. 3550 Kg) Throughput capacity approx. 3 - 5 m3 per hour, depending on material and sieve Suction nozzle 200 mm, can be used on both sides Suction capacity at least 28m/sec. on suction nozzles

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

Laska vacuum cutter 330 liter Completely made of special stainless steel 330-liter bowl made of stainless steel Integrated vacuum pump Integrated loader for meat bins 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel 6 pieces Knives Machine dimensions in cm: width: 310 depth: 400 height: 285 Weight: 5550 kg Main motor power: 120 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

AVM DG13 CNC lathe visible in processing in excellent condition. Bar passage 90, with Cucchi loader for bar machining 8 station turret not motorized Fanuc 0T / C control BA100 collet holder Chip evacuator Filtermist fume extractor Various fixed tool holders

automatic loader year 2003, max diameter ø 60/65 mm, bar L = 3000 mm, available and visible

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS

Product number: 1854J Type: NM-500 Serial number: 10062 Year of construction: 2013 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 420V, 50Hz, 32A Dimensions: 4600 x 1400 x 2850 mm Weight: 3650 kg With Tender-Form® and Paper interleaver Including lifter for 200L meat bins, 2 pc. tool trolley and several forming plates

Robot Sepro new automatic hopper 3 PIOVAN dehumidifying silos. mill drinkers Transportation and installation not included.

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Piovan air dehumidifier Mod. DS 415, capacity 400 kg, (Motan hopper excluded).

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

AFT Single shot depositor Mini depositor Serial: 101001-01 2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

White onion peeling machine. The machine consists of three modules: a hopper from which the onion is transferred by a conveyor belt to the sorter. At the sorter there are two workers who sort the onions on both sides, put the usable ones in the holders and throw the damaged or spoiled onions onto the middle conveyor belt ordering them to evaporate. The onions suitable for further processing are conveyed in the incision holder by specially designed knives and then fall onto the rotating rollers. After turning the onion several times, a high-pressure air stream blows away the corresponding layers of the onion down to the white layer. The onion then falls on the sorting table, where it is picked up by an employee and placed in collective packages. Technical parameters: - manufacturer: GOLDEN MACHINE - type of machine: 2-row - Capacity: approx. 0.4 - 0.8 tons/h - year of production ...

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...