gluespreader machines used for sale (574)

Code: 0380 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2100 x 700 x 1250 h Weight kg 350

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 m ...

automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm

Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg  ...

Code: 0358 Brand: FRAVOL Model: VSB - CE Standard Edgebander for straight, round or curved panels with edge of veneer , melamine, PVC, Abs, up to 3 mm thickness - CE Standard Technical data: New patented working table on nylon plugs which guarantees an easier panel sliding and perfect integrity and cleanliness of the faced panel surface Worktop dimensions mm 910 x 860 Worktop height mm 910 Panel height mm 10/40 Edge thickness 0,4 - 3 mm Min. internal radius 20 mm Working pressure 6 bar Installed power Kw 2,35 Supporting bar with balls Compressed air 6 bar Overall dimensions: mm 900 x 900 x 1100 h Weight kg 240

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

Key data: 5 mm

Edge banding machine Edge banding EBM Type: KDP 112 SLK Year of Make: 2000 Gluing over hot-melt adhesive basins Plastic edges and veneers 0.4 to 1mm PVC edges and thick veneers 1.0 - 3.0 mm Solid edges up to 5 mm Flush saws with cross-cut unit Flush milling at the top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are indicative. Depending on the distance, these may vary. The item offered is offered with differential taxation. The sales price shown is the gross fina ...

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

Manufacturer: Wemhöner , Year: 1997, Type: Vario pin Presse, Control: Siemens S 5, Number of tables: 2, Automatisches Rüsten: yes, Pin-Sytem: yes, Heating system: Elekto, Nutzfläche : 1290 X 2500, min.Folienbreite: 1450, Min.-max. workpiece height in mm: 10-40, Press length mm: 2500, Pressing width mm: 1290, Work piece thickness max mm: 40, Membrane: yes, Foil magazin spaces: 4, Kammerdruck: 6 bar pneumatisch/360bar Hydraulschi, Through running machine: yes, Membrane: yes, Landing opening mm: ca.80, Längsdurchlauf: yes, Automatische Entleerung: yes, Through running machine: yes, FREE TEXT: Automatischer Folienozug mit Schneidanlage und Abnahmestation mit Wender/, Year :1997

Adhesive melter, gluing machine, hot glue machine, industrial hot glue gun, melting glue gun -sold as a source of spare parts -Connection: 220 volts -Machine: electrically heated -for granules -Propulsion via adjustable geared motor -Dimensions: 700/500/H1200 mm -Weight: 150 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter-Outer: Ø 180 mm-Height: 35 mm-Radius-Socket: Ø 30 mm-Weight: 5.6 kg

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm -Weight: 190 kg