british flag
Resale Logo

engel used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machine tools and sheet metal working machines  Wirths GmbH  http://www.wirths.net 
banner logo
start page > keywords engel > results
269 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14
123726258 107  

MENGELE 10-6000 for sale
Guillotine Shears


Plate shear Mengele Type 10-6000 Cutting performance 6050mmx10mm Front gauge 1500 mm Back gauge 1000 mm Weight 37,000 kg

 
Plate shear Mengele

Type 10-6000

Cutting performance 6050mmx10mm

Front gauge 1500 mm

Back gauge 1000 mm

Weight 37,000 kg

 
Price  
    request
123738750 107

MENGELE S6-3000 for sale
Plate Shear - Hydraulic


sheet width: 3050 mmplate thickness: 6 mmweight of the machine ca.: 9600 kgThis ad was created with MODUL MWS - the software solution of LogoTech.
used machine
 
sheet width: 3050 mm
plate thickness: 6 mm
weight of the machine ca.: 9600 kg



This ad was created with MODUL MWS - the software solution of LogoTech.
1980
Price  
    request
123713047 703

TALSA MIX35p for sale
Mixers and vacuum mixers


Talsa MIX35p Mengelberg machine second-hand Boiler and fork Fast forward and rewind of the boiler and the fork Head liftable, front tilted boiler after as new, very good condition 2015. too small bought according ...
used machine
 
Talsa MIX35p Mengelberg machine second-hand

Boiler and fork
Fast forward and rewind of the boiler and the fork
Head liftable, front tilted boiler after
as new, very good condition
2015.
too small bought according to the previous owner and therefore rarely used
Machine should be thoroughly cleaned before use

Video about test run and more pictures available
2015
1,950 €  
    request
123733692 301

ENGEL ES 650-150 HL for sale
Injection molding machine up to 5000 KN


screw size:45 mminjection shot weight in Polysterol:286 gclamping force:1.500 kN: INJECTION UNIT: screw size:45 mmmax. swept volumne:318 cm³injection shot weight in Polysterol:286 g/PSinjection pressure:2040 bar: CLAMPI ...
used machine
 
screw size:45 mm
injection shot weight in Polysterol:286 g
clamping force:1.500 kN
:
INJECTION UNIT:
screw size:45 mm
max. swept volumne:318 cm³
injection shot weight in Polysterol:286 g/PS
injection pressure:2040 bar
:
CLAMPING UNIT:
clamping force:150 t
plate size:820 x 750 mm
mould hight min.:250 mm
opening stroke:700 mm
:
CONTROL:
microprocessor control:CC100
screen text:deutsch / german
Manual:deutsch / german
:
EQUIPMENT:
robot interface:ja / yes
core pull:2 x
:
OTHER DATAS:
pump drive power:30,0 kW
total connection power:43,3 kW
total weight:11.500 kg
dimension L x W x H:5.8 x 2,0 x 2,3 m

bigger plattens 8 x mould heating devices inkl. Engel robot ERC 33/2 CL, (92351) safety fences X - 400mm, servo driven Y - 1.000mm, servo driven Z - 2600mm, servo driven 1 x gripper 1 x Vacuum Adapter, 460mm (560 x 70mm, M16) payment: 100% prior to delivery
1995
Price  
    request
123706214 1104  

LOOS 4,0 to, 10 bar for sale
Steam boiler with chimney


G 111 1 Loos steam boiler length steam boiler: 5,20 m with burner 6 m diameter: 2,85 m Type: UL-S No. 51837 manufacturer year is 1989 4.000 kg steam per hourpro Stunde 10 bar steam pressure water cont ...
used machine
 
G 111
1 Loos steam boiler
length steam boiler: 5,20 m
with burner 6 m
diameter: 2,85 m
Type: UL-S
No. 51837
manufacturer year is 1989
4.000 kg steam per hourpro Stunde
10 bar steam pressure
water content 6.030 l
electronic cabinet above the Weißhaupt burner

with Weißhaupt gas-oil burner
Typ Monarch, GL 10/10
manufacturer is 1999

backside of the boiler is installed
1 air/ waste gas heat exchanger
manufacturer is Bosch Industriekessel GmbH
heat exchange cap. is 115 kW
max temperature until to 238 °C
proof pressure: 58 bar

with 1 chimney, made out of black steel, insulated
in a high of 1,70 m is the gas inlet of the chimney
manufacturer is Engelhard GmbH SES
91717 Wassertrudingen
manufacturer year is 2013, building type FSA
high of the chimney is 21 m, diameter outside: 505 mm
with 1 boiler water preparation plant with Ion exchanger


Price up standing point: 27.000,00 Euro



1989
27,000 €  
    request
123645345 301

ENGEL ES 650-150 HLST for sale
Injection molding machine up to 5000 KN


screw size:45 mminjection shot weight in Polysterol:286 gclamping force:1.500 kN: INJECTION UNIT: screw size:45 mmmax. swept volumne:318 cm³injection shot weight in Polysterol:286 g/PSinjection pressure:2040 bar: CLAMPI ...
used machine
 
screw size:45 mm
injection shot weight in Polysterol:286 g
clamping force:1.500 kN
:
INJECTION UNIT:
screw size:45 mm
max. swept volumne:318 cm³
injection shot weight in Polysterol:286 g/PS
injection pressure:2040 bar
:
CLAMPING UNIT:
clamping force:150 t
plate size:820 x 520 mm
mould hight min.:250 mm
opening stroke:700 mm
:
CONTROL:
microprocessor control:CC100
screen text:deutsch / german
Manual:deutsch / german
:
EQUIPMENT:
robot interface:ja / yes
core pull:nein / no
:
OTHER DATAS:
pump drive power:30,0 kW
total connection power:43,3 kW
total weight:11.500 kg
dimension L x W x H:5.8 x 2,0 x 2,3 m

New Pump 10/2017 Less operatinghour, only 51.000h! Payment: 100% prior to delivery
1998
Price  
    request
123706078 301

ENGEL ES 7000/800 for sale
Injection Moulding Machine


Screw diameter: 105mm, injection pressure: 1400bar, max. stroke volume: 4156cm³, injection weight: 3740g, plastification capacity: 117g/s, screw stroke: 480mm, rotational speed: 5-130/min, nozzle pressing force: 150kN,  ...
used machine
 
Screw diameter: 105mm, injection pressure: 1400bar, max. stroke volume: 4156cm³, injection weight: 3740g, plastification capacity: 117g/s, screw stroke: 480mm, rotational speed: 5-130/min, nozzle pressing force: 150kN, nozzle stroke: 700mm, cylinder heating output: 63,2kW, clamping force: 8000kN, opening force: 215kN, plate dimensions: 1500x1500mm, distance between tie bars: 1000x1000mm, daylight: 400-1000mm, weight: 61t, including Robot ENGEL ERC 83/2-P.
1991
Price  
  DE   request
123645391 301

ENGEL ES 650-150 for sale
Injection molding machine up to 5000 KN


screw size:40 mminjection shot weight in Polysterol:226 gclamping force:1.500 kN: INJECTION UNIT: screw size:40 mmmax. swept volumne:251 cm³injection shot weight in Polysterol:226 g/PSinjection pressure:1.800 bar: CLAMP ...
used machine
 
screw size:40 mm
injection shot weight in Polysterol:226 g
clamping force:1.500 kN
:
INJECTION UNIT:
screw size:40 mm
max. swept volumne:251 cm³
injection shot weight in Polysterol:226 g/PS
injection pressure:1.800 bar
:
CLAMPING UNIT:
clamping force:150 t
daylight:460 x 460 mm
plate size:700 x 700 mm
mould hight min.:150 mm
opening stroke:460 mm
:
CONTROL:
microprocessor control:CC90
screen text:holländisch/holländisch
Manual:holländisch/holländisch
:
EQUIPMENT:
robot interface:nein/no
core pull:1 x
:
OTHER DATAS:
pump drive power:30,0 kW
total connection power:38,7 kW
total weight:7.400 kg
dimension L x W x H:5.6 x 1,6 x 2,0 m

Payment: 100% prior to delivery!
1989
Price  
    request
123639031 301

ENGEL ES 7000/1200 B for sale
Injection molding machines


OVERVIEW: Brand: ENGEL Model: ES 7000/1200 B Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: 01/05/2018 Construction year: 1993 Production hours: 137287 Location: Germa ...
used machine
 
OVERVIEW:
Brand: ENGEL
Model: ES 7000/1200 B
Application type: Injection Moulding
Machine type: Injection Moulding Machine
Availability: 01/05/2018
Construction year: 1993
Production hours: 137287
Location: Germany
Origin country: Austria

GENERAL DATA:
Measurements width: 13000 mm
Measurements depth: 3900 mm
Measurements height: 2600 mm
Machine weight: 87000 kg

CONTROL UNIT:
Brand: ENGEL
Model: C90
Remote control: yes

INJECTION UNIT:
Screw diameter: 105 mm
Shot weight: 580 g/sec g/PS
Stroke volume: 4156 cm³
Injection pressure: 1750 bar
Plasticizing rate max.: 117 g/s PS
Screw speed: 5-130 1/min
Heating capacity: 68 kW
Adjustable heating zones: 6
Nozzle pressure: 150 kN

CLAMPING UNIT:
Clamping force: 12000 kN
Opening stroke: 13200 mm
Max. open daylight: 1100 mm
Distance between bars (h x v): 1400/1150 mm
Mould height min.: 400 mm
Mould height max.: 1200 mm
Size of mold platens: 1990-1740 mm
Ejector stroke: 300 mm
Ejector force for / back: 215 kN

MEDIA:
Oil tank: 1800 L
Pump drive power: 110 kVA
1993
Price  
  DE   request
123366935 107

MENGELE S8 - 6000 for sale
Plate Shear


Weight approx.: 21500 kgDimensions (l x w x h) approx.: 7000 x 2600 x 2400 mmDescription: Plate shears, capacity: 6050 x 8 mm, electric NC back stop, light guard protection
used machine
 
Weight approx.: 21500 kg
Dimensions (l x w x h) approx.: 7000 x 2600 x 2400 mm
Description: Plate shears, capacity: 6050 x 8 mm, electric NC back stop, light guard protection
2001
used machinery auction RESALE 18,500 €  
  NL   request
123600519 301  

ENGEL vc 750/200 HL 200-750 for sale


Angel 200t / 2000kN injection molding machine Harvesting tool ER HLi 61 very well maintained
used machine
 
Angel 200t / 2000kN injection molding machine
Harvesting tool ER HLi 61
very well maintained
2000
Price  
    request
123039138 213

Engel Verstellmotor Achse GerÄtetr& Serie E for sale


Manufacturer: Engel Verstellmotor Achse Geräteträger, Year: ca.1994, Type: Serie E, Volt/Hz: 24/7,5 Ampere, pm: 12,6 mV/1/min, Watt: 250, Year :ca.1994
used machine
 
Manufacturer: Engel Verstellmotor Achse Geräteträger, Year: ca.1994, Type: Serie E, Volt/Hz: 24/7,5 Ampere, pm: 12,6 mV/1/min, Watt: 250, Year :ca.1994
1994
Price  
    request
123600517 301  

ENGEL 600-105 ES105/600 CC80 for sale


Angel 105t / 1050kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resistant screw ...
used machine
 
Angel 105t / 1050kN
very well maintained, sold due to business. Low number of operating hours
Extensive equipment:
-Quick-clamping system with clamping pin
-Temperature control device interface
-Wear-resistant screw/cylinder
1983
Price  
    request
123039139 213

ENGEL VERSTELLMOTOR GERÄTETRÄG Serie A/GNM 4150-B5.2 for sale


Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994
used machine
 
Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994
1994
Price  
    request
123600515 301  

ENGEL 150-700 ST 700-150 CC90 for sale


ENGEL 150t / 1500kN injection molding machine very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interf ...
used machine
 
ENGEL 150t / 1500kN injection molding machine
very well maintained, sold due to business. Low number of operating hours
Extensive equipment:
-Quick-clamping system with clamping pin
-Temperature control device interface
-Wear-resistant screw/cylinder
1985
Price  
    request
122982624 106

MENGELE S 8-3000 for sale
Plate Shear - Hydraulic


sheet width: 3050 mmplate thickness: 8 mmdistance between columns: 300 mmtotal power requirement: 18 kWweight of the machine ca.: 7,8 tMetal thickness, normal / max. (45 N / mm2) 8 mmCutting length 3,050 mmMetal passa ...
used machine
 
sheet width: 3050 mm
plate thickness: 8 mm
distance between columns: 300 mm
total power requirement: 18 kW
weight of the machine ca.: 7,8 t
Metal thickness, normal / max. (45 N / mm2) 8 mm
Cutting length 3,050 mm
Metal passageway, approx. 16 mm

Working width between columns 3,050 mm
Gap in columns 300 mm
Cutting angle 2°30´ - 1°20´
Table height above floor 850 mm
Table size, approx. 3,200 x 500 mm
Strokes per minute 19 / 27

Adjustment range of back stop, approx. 1,000 mm

Pump drive 4 / 16 kW
Total electrical load, approx. 18 kW - 380 V - 50 Hz
Weight, approx. 7.8 to

Accessories / Special Features
Parallel back stop, adjustable with motor, with threaded spindle and length display via fine counting mechanism with 1/10 mm readout.
Side stop at the left-hand side for precise right-angled cuts, approx. 1,500 mm long.
Cutting edge lighting for cutting marked lines.
Hydraulic sheet metal holder.
Cutting length limitation = return stroke for shorter metal sheets.
Foot pedal release.
Various supporting consoles for the front sheet metal support plate.
Various spare cutters.
Machine can stand on the floor (and does not need a pit).


Condition : Good - hardly used. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.

Thank you for your interest.



This ad was created with MODUL MWS - the software solution of LogoTech.
1977
Price  
    request
123600513 301  

ENGEL 250-1300 HL 1300/250 CC90 for sale


ENGEL 250 tons / 2500kN injection molding machine very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device in ...
used machine
 
ENGEL 250 tons / 2500kN injection molding machine
very well maintained, sold due to business. Low number of operating hours
Extensive equipment:
-Quick-clamping system with clamping pin
-Temperature control device interface
-Wear-resistant screw/cylinder
1986
Price  
    request
122982636 101

COLLET & ENGELHARDT BF 130 - 11 for sale
Floor Type Boring and Milling M/C - Hor.


spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm  ...
used machine
 
spindle diameter: 130 mm
x-travel: 3000 mm
y-travel: 2000 mm
total power requirement: 4,5 kW
weight of the machine ca.: 30 t
Spindle Ø 130 mm
Spindle taper SK 50

Working range: X = column, longitudinal 3,000 mm
Y = headstock, vertical 2,000 mm
Z = spindle stroke 1,000 mm

Lower table 3,300 x 2.400 mm
Max. weight on table 10 tons/m²
Min./ max position of work spindle above table 770 / 2,770 mm

Feeds 0.9 - 2,000 mm/min
Quick feed for headstock and column 5,000 mm/min
Quill feed 0.5 - 1,200 mm/min

Speed range, partially infinitely variable 4.5 - 1,250 rpm
Weight, approx. 30,000 kg

Accessories / Special Features
HEIDENHAIN Digital Display for 3 axes.
Hardened guideways. Ball screw spindles.
Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor.
Moving operating platform. Hanging control panel. Manual operating control.
Platform. Hydrostatics in the column displacement.
Mounting plate 3,200 x 2,500 mm, planed, with t-slots.
Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled.
Hydraulic clamping of column and slides. Motor driven tool clamp.
Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories.


This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers.

Condition : Good. Machine can soon be inspected under power.
Delivery : Ex stock as inspected
Payment : Net, after conclusion of contract

Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.


This ad was created with MODUL MWS - the software solution of LogoTech.
1973
Price  
    request
123600511 301  

ENGEL 80-330 80/330 CC90 for sale


Angel 80t / 800kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resistant screw/c ...

 
Angel 80t / 800kN
very well maintained, sold due to business. Low number of operating hours
Extensive equipment:
-Quick-clamping system with clamping pin
-Temperature control device interface
-Wear-resistant screw/cylinder
 
Price  
    request
122980564 103

NICOLAS CORREA A 25/35 for sale
Bed Type Milling Machine - Horizontal


x-travel: 3500 mmy-travel: 900 mmz-travel: 1000 mmControl: ENGELHARDT SERIE C Control: ENGELHARDT SERIE C with construction functionClamping area - 4000x700 mmTool taper - SK 50Speeds - 2000 U/minDIN-ISO programming is s ...
used machine
 
x-travel: 3500 mm
y-travel: 900 mm
z-travel: 1000 mm
Control: ENGELHARDT SERIE C
Control: ENGELHARDT SERIE C with construction function

Clamping area - 4000x700 mm
Tool taper - SK 50
Speeds - 2000 U/min

DIN-ISO programming is similar like the controls SIEMENS and FANUC with
G-function.
It is possible to mill and to drill circualar pocket/grooves, slotted holes
The highlight ist he CAD/CAM programm of the company VECTOR: it is possbile
drawing and creating a programm simultanously.




This ad was created with MODUL MWS - the software solution of LogoTech.
1983
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country