used ENGEL insert

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

ENGEL Insert 80V/60 year `2011 ENGEL Insert 80V/60 year `2013 ENGEL Insert 80V/60 year `2014 x 5 units *Location : Korea

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 2 units are available.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

Key data: 1000 kN

Engel Insert 80V/80V/100 2F/2-K Tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared Protective Curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine was regularly serviced by the authorized service Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by our serv ...

Key data: 350 kN, 18 mm

Manufacturer: ENGEL, type Insert Insert 80H/35 Construction: Rotary table Clamping force: 35 t Year of manufacture: 2011 - neat condition, maintained, no oil leakage. Commissioning: 23.11.2011 Hours: 36,077 hours Injection unit: 18 mm Control: CC200

Offer: Engel Insert 500V/100 LIM Bj./year 2014 approx. 8000h

Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

Description 13 zone mold heating working hours: 3447

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

BRAND: ENGEL YEAR: 2017 MODEL: INSERT 60V-35 SINGLE XS ECODRIVE PRODUCTION HOURS: 12750 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2300 MM MEASUREMENTS DEPTH: 2600 MM MEASUREMENTS HEIGHT: 1400 MM MACHINE WEIGHT: 4450 KG CLAMPING UNIT CLAMPING FORCE: 350 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CENTERING 125 MM - CENTER HOLE DIAMETER 40MM - NOZZLE OPEN CORROSION RESISTANT IN SPECIAL DESIGN RADIUS: 35 MM, BORE: 4 MM, IMMERSION DEPTH: 30 MM

BRAND: ENGEL YEAR: 2019 MODEL: INSERT 60V-35 SINGLE XS ECODRIVE PRODUCTION HOURS: 11781 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CLAMPING UNIT CLAMPING FORCE: 350 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. LOADING TURNTABLE / SLIDING TABLE: 600 KG - EJECTOR PATH: 100 - SLIDING TABLE STROKE (SHUTTLE XS): 750 MM - ROTARY TABLE DIAMETER (ROTARY XS): 900 MM - CLAMPING PLATE SIZE: 780 X 400

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

Key data: 900 kN, 140 g/PS, 35 mm

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm ***** Basic unit ***** X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg ***** pneumatic ***** Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 ***** electrics ***** Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard ***** General ***** Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 10 ...

Stainless steel, with 1 screen, Area: 600 x 300 mm, inlet: D = 120 mm (max. 250 mm),. Outlets: Good D = 250 mm, bad: D = 250 mm, Vibromotor: 0.12 kW,

Manufacturer Engel Type ES 200 -50 HLST CC 100 Control CC 100 Built in 1997 Operating hours h 28000 Closing unit Closing force t 50 Opening path mm 450 Installation height min/max mm 200 / 650 Plate size 660 x 560 Spraying unit Screw diameter mm 30 Dimensions and weights Machine weight Kg 4700 Other

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.