used ENGEL motion

Key data: 800 kN

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Key data: 1000 kN

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is all-electric and energy efficient. It has fast, dynamic, and highly precise movements through a five-point toggle lever clamping system with low friction platen guidance on precision linear bearings. The machine is still at the production and can be checked upon request. Full service documentation and manuals.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has a clamping force of 3800 kN.

ENGEL electric 280 ton year `2006. -Model : e-motion 740/280 -Clamping force : 280 ton -Screw diameer 45mm -Manufactured year : 2006

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

BRAND: ENGEL YEAR: 2015 MODEL: E-MOTION 2440/380 T PRODUCTION HOURS: 55201 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 8300 MM MEASUREMENTS DEPTH: 2200 MM MEASUREMENTS HEIGHT: 2600 MM MACHINE WEIGHT: 22200 KG CONTROL UNIT BRAND: ENGEL MODEL: CC300 INJECTION UNIT NOZZLE PRESSURE: 500 MM CLAMPING UNIT CLAMPING FORCE: 3800 KN OPENING STROKE: 700 MM MOULD HEIGHT MIN: 300 MM MOULD HEIGHT MAX: 750 MM SIZE OF MOLD PLATENS: 1140X1140 MM EJECTOR FORCE FOR / BACK: 120 KN MEDIA MAIN ELECTRONIC CONNECTION: 3X400V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HIGH PERFORMANCE AND PRECISION. - ALL-ELECTRIC AND ENERGY EFFICIENT. - FAST, DYNAMIC AND HIGHLY PRECISE MOVEMENTS THROUGH A FIVE-POIN ...

Key data: 1000 kN, 40 mm

warehouse no.: 503248 manufacturer: ENGEL type: e-motion 440-100 controller: CC200 year of construction: 2017 clamping force: 1000 kN size of mould plates h: 740 mm size of mould plates v: 700 mm min. mould height: 450 mm max. mould height: 720 mm max. open daylight: 1150 mm opening stroke: 430 mm screw diameter: 40 mm swept volume: 220 ccm injection pressure: 1930 bar measures of machine lxbxh: 5.3m x 1.6m x 2.2m total weight: 10000KG equipment included: screen text german Anti vibration mounts

Clamping force 150 ton

Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm ***** Basic unit ***** X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg ***** pneumatic ***** Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 ***** electrics ***** Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard ***** General ***** Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 10 ...

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Stainless steel, with 1 screen, Area: 600 x 300 mm, inlet: D = 120 mm (max. 250 mm),. Outlets: Good D = 250 mm, bad: D = 250 mm, Vibromotor: 0.12 kW,

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

Manufacturer Engel Type ES 200 -50 HLST CC 100 Control CC 100 Built in 1997 Operating hours h 28000 Closing unit Closing force t 50 Opening path mm 450 Installation height min/max mm 200 / 650 Plate size 660 x 560 Spraying unit Screw diameter mm 30 Dimensions and weights Machine weight Kg 4700 Other

Stock no.: 7038 Manufacturer:Engel Diameter: 15 mm for 80V aggregate used for vertical unit

ENGEL Insert 80V/60 year `2011 ENGEL Insert 80V/60 year `2013 ENGEL Insert 80V/60 year `2014 x 5 units *Location : Korea

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

Engel hose pouring machine type: IT 2000-350 controls: CC 90 construction year: In 1987 Schliesseinheit Schliesskraft t: 350 opening ways mm: 700 cross-beam measure mm: 735x735 installation height min / max. mm: 250/660 record size: 1080 x 1080 hose unity snail diameter mm: 70 hose weights gr: 1009 hose volumes cm?: 1154 hose pressure cash: 1400 mass and weights dimensions LxBxH m: 9.00 x 2.10 x 2.40 machine weights kg: 20500 other Euromap 12 angels Robot

Engel hose pouring machine type: IT 1300/250 control: CC 90 construction year: In 1991 Schliesseinheit Schliesskraft t: 250 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200 / 600 record size: 200 / 600 hose unity snail diameter mm: 60 hose weights gr: 735 hose volumes cm?: 661 hose pressure cash: 1500 mass and weights machine weight kg: 12500 other Euromap 12 angels Robot

Engel hose pouring machine type: IT 1300/250 control: CC 90 construction year: In 1991 Schliesseinheit Schliesskraft t: 250 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200 / 600 record size: 200 / 600 hose unity snail diameter mm: 60 hose weights gr: 735 hose volumes cm?: 661 hose pressure cash: 1500 mass and weights machine weight kg: 12500 other Euromap 12 angels Robot

Engel hose pouring machine type: IT 20000/1800, with Engel ERC 203/1-N Robot control: ERC88 / construction year CC90 A01: In 1991 Schliesseinheit Schliesskraft t: in 1800 cross-beam measure mm: 1400 installation height min / max. mm: 900/1700 record size: In 2100 x in 2100 hose unity snail diameter mm: 160 hose weights gr: 12500 hose volumes cm?: 12958 hose pressure cash: 1600 mass and weights dimensions LxBxH m: 19.8 x 3.5 x 3.1 machine weights kg: 172000 (137000/35000) other with Engel row ERC 203/1-N Robot Euromap 2core

Engel hose pouring machine type: 3550/800 duet with Engel Robo control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 800 opening ways mm: 1200 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 650/ record size: 1570 x 1470 hose unity snail diameter mm: 80 hose weights gr: In 1770 hose volumes cm?: in 1960 hose pressure cash: In 1730/2030 mass and weights dimensions LxBxH m: 8.8 x 3 x 2.30 machine weights kg: 30.000/10.000 other Neureder Robot

Engel hose pouring machine type: 4550/700 duet with Robot control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 700 opening ways mm: 1400 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 450/ record size: 1570 x 1470 hose unity snail diameter mm: 90 hose weights gr: 2233 hose volumes cm?: 2481 hose pressure cash: In 1910/2180 mass and weights dimensions LxBxH m: 9.2 x 3 x 2.67 machine weights kg: 30.000/10.000 other Neureder Robot

Engel hose pouring machine type: 3550/700 duet with Robo control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 700 opening ways mm: 1200 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 550/ record size: 1570 x 1470 hose unity snail diameter mm: 80 hose weights gr: In 1770 hose volumes cm?: in 1960 hose pressure cash: In 1730/2030 mass and weights dimensions LxBxH m: 9.2 x 3 x 2.67 machine weights kg: 30.000/10.000 other Neureder Robot system