Manufacturer:
(Category: 101-7)
Key data: 500 mm, 250 mm
Precision coordinate boring and milling machine, top condition Fehlmann, Picomax 55 CNC Control : Heidenhain TNC 407 (415) Process : 500 x 250, Z: 145 (+160 man.) W- 500mm, Table: 885x320mm, ATC 27 pos Spindle: 50 - 10000 rpm, 7kw
x-travel: 630 (875) mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC 430 turning speeds: 20-7.000 U/minfeed: 0-15.000 mm/mintool change unit: 16-fach rapid power traverse in X-and Z direction: 15 m/mintool taper: SK 40 table surface area: 900 x 528 mmmax. table load: 400 kgspindle diameter in front bearing: 55 mmswivellable: 0-90 °quill stroke: 75 mmspindle hours: 9.546 htotal power requirement: 12/7,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 4 x 3,6 x 2,2 mHERMLE U 630T 3-axis machining centre, built in 1999The X-axis, with a stroke of 630 mm, can be extended to 875 mmby swivelling the tool changer out of the way.Accessories:Tool holders, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2000 mm, 600 mm, 700 mm
5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 1000 x 600 mmspindle taper: HSK 63 A spindle turning speed - stepless: 18.000 U/minfeeds x/y/z -stepless: 0 - 30.000 mm/minrapid traverse: 30 m/minno. of tools in magazin: 2 x 12 workpiece diameter at full load: 130 mmtool length - max.: 315 mmweight of tools max.: 8 kginternal coolant system feed: 40 barcontrol: HEIDENHAIN control: MillPlus iT table load capacity: max. 500 kgtotal power requirement: 52 kVAweight of the machine ca.: 6,5 tdimensions of machine L x W x H: 3,40 x 1,86 x 2,42 mAccessories: probe HEIDENHAIN, TS 640, electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 800 mm, 800 mm
For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.
x-travel: 660 mmy-travel: 500 mmz-travel: 600 mmtable surface area: 630 x 500 mmspindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/minfeeds: 30 m/mincontrol: PHILIPS CNC 532 internal coolant system feed: 40 bartotal power requirement: 50 kWweight of the machine ca.: 13,3 twith rotary pallet changer and hydr. swivelling head (horiz./vert.)Accessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of Make: 2008 Travels: X-axis 1,800 mm Y-axis 510 mm Z-axis 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 Mount: SK 40 Tool magazine: 20 times Spindle speed Celox spindle: 50 – 12,000 rpm Accessories - 3D Formingstar Pack - 3D Heidenhain touch probe - Chip conveyors - Partition wall - LTA suction - Water tank high-pressure pump 20 bar - Machine hood
x-travel: 1500 mmy-travel: 650 mmz-travel: 650 mmsize of pallet: 1740 x 650 mmspindle taper: SK 50 spindle turning speed range: 25 - 6000 U/minfeeds longditudinal/cross/vertical: max. 8 mm/minrapid traverse longitudinal and cross: 26 m/minrapid traverse vertical: 20 m/minspindle throat: 665 mmdistance spindle nose and table: 200 / 850 mmdrilling in full material: 50 mmøthreading: M 45 ATC: 60 Postool diameter: 125 mmwotkpiece diameter with 2 vacant positions: 260 mmworkpiece length: 400 mmweight of tools max.: 20 kgspindle drive: 18,5 kWcontrol: MAZATROL M PLUS Accessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 900 mm, 850 mm, 700 mm
5 Axis Machining Center Manufacturer: Hedelius Type Acura 85 Control Heidenhain iTNC640 Year of construction 2022 Clamping area 850 x 750 Max. table load 1000kg Travel X/Y/Z 900/850/700 max speed 18,000rpm Tool holder HSK63 80 Compartment Tool Changer IKZ 70bar Chip conveyor Electronic handwheel Hydraulic zero point clamping system pssend also a magnetic plate 600 x 800mm adapted to the NP clamping system. Hydraulic Vise Schunk 2 x Schunk center clamps 60 HSK 63 Recordings Machine comes from a company liquidation and is in perfect TOP condition. All information without guarantee
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...
Key data: 560 mm, 560 mm, 660 mm
Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe
x-travel: 1100 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1300 x 600 mmspindle taper: SK 40 spindle turning speed - stepless: 10.000 U/minATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 8,8 tdimensions of machine L x W x H: 2,58 x 3,04 x 2,35 mAccessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood
x-travel: 710 mmy-travel: 630 mmz-travel: 500 mmtable surface area: 1100 x 585 mmrotary table dia.: 500 mmspindle taper: SK 40 spindle turning speed range: 5 - 6300 U/minspindle power: 11 kWno. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kWweight of the machine ca.: 5,8 tAccessories: various tool holders, probe RENISHAW OMP 60, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mmy-travel: 750 mmz-travel: 725 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840DNC-rotary table B-axisautomatic tool changer for 320 toolspallet changing device, 2 pallets 500 mm x 500mmcoolant through spindle device IKZ (80 bar)chip conveyorcoolant deviceTechnische Daten / technical details:X-Weg längs / X-travel longitudinal 750 mmY-Weg senkrecht / Y-travel vertical 750 mmZ-Weg quer / Z-travel cross 725 mmB-Achse / B-axis 360 °Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpmWerkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/minEilgang / rapid feed 60 m/minAntriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kWGewicht der Maschine ca. / weight ca. ...
The machine is in good technical condition, testing is possible by prior arrangement.
x-travel: 2000 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 2500 x 650 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Postotal power requirement: 60 kWweight of the machine ca.: 7,5 t- with coolant through spindle -Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- new spindle on X-axis in 2020The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
x-travel: 610 mmy-travel: 405 mmz-travel: 510 mmtable surface area: 760 x 400 mmspindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/minspindle drive: 7,5 kWmax. torque on the spindle: max. 142 Nmfeeds: 3,0 - 7600 mm/minrapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/mindistance table / vertical spindle: max. 600 mmtable load: 350 kgno. of tools in magazin: 24 workpiece diameter at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6,8 kgcontrol: ULTIMAX SSM total power requirement: 18 kVAweight of the machine ca.: 4,1 tAccessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg
The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation
Key data: 3000 mm, 850 mm, 800 mm
For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl
The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.
Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)
General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement
CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads
The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.
Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm ...
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar
The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg
Heller MC16 Nr31-43487 BJ. 2009 Spindle revolutions 1/min 45-16000 SK40 Travel ranges mm X 630 Y 630 Pobmlb Saowfd Eusljrd Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Pallet dimensions 400 x 500 Max. load pallet kg 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 63
Key data: 560 mm, 410 mm, 450 mm
YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH
Key data: 3000 mm, 2500 mm, 1250 mm
Zimmermann FZ38 - 5 Axis Portal Year of construction 2005 - 2022 has been renewed for 600,000 euros, receipts from Zimmermann are enclosed X 3000 Y 2500 Z 1250, A +/- 100 straight C +/- 360 straight 2 spindle 50 kw - 24000 rpm and 44 kw -10,000 rpm Certification Linear Axes 5/m Siemens Control U….. See pictures For more information please contact us At call
Key data: 900 mm, 500 mm, 500 mm
Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm
The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots
The machine is in good technical condition, testing is possible by prior arrangement.
Key data: 435 mm, 465 mm, 560 mm
Matsuura MX-330 - PC10 Vertical 5-axis machining center CNC control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 Max. workpiece diameter x height 330 x 300 mm X-axis travel 435 mm Y-axis travel 465 mm Travel Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15,000 rpm Spindle holder MAS BBT 40 Spindle motor 7.5/5.5 kW Magazine capacity 90 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
used
Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale
The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k
CHIRON FZ18 S CNC machining center with SK40 rotary table integrated as 4-axis in the control system Control: SIEMENS NUMERIK 810 Not in operation since 2016
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece probe renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Table diameter 200mm. X and Y overhauled.
The machine is in good technical condition, testing is possible by prior arrangement.
Key data: 1000 mm, 510 mm, 450 mm
CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.
Key data: 800 mm, 800 mm, 800 mm
3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024
Key data: 450 mm, 270 mm, 310 mm
Chiron FZ08KS Magnum, NC machine: 3-axle Workbench: Length [mm]: 770, Width [mm]: 290 Table information: Rigid table with chip tray for optimal chip fall for wet and dry machining Clamping area: 770mm x 290mm with raster drilling pattern M16 x 15H7 x 50mm Table load: max. 500 kg Rapid traverse: X and Y axis 40m/min, Z axis 60m/min Max. speed [rpm]: 1500 Dimensions/Weight: Length [m]: 2,308, Width [m]: 1,405, Height [m]: 2,447 Total weight [Kg]: 3400 Electronics: Control Type: Siemens CNC Control 84OD PCU 50 / NCU 572.4, 6 measuring circuits, 1 channel incl. 10.4" TFT color screen / full keyboard OPO10S Windows NT Control Panel Logic NO RAM 256KB Machine connection: Voltage [V]: 400 / 230V t 107o - 50Hz/N/PE Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 13kVA Remark Accessories: Pressure monitoring of internal cooling
