Center width approx. 800 mm, center height approx. 150 mm, clamping bush, quick-release device, tailstock
Speed furnace LeChef 230v 3,000 watts purchased 06.2024 for approx. 4670 ? net, 1x pan square smooth bottom 260 x 260, 1x round pan 190 mm, 1x pan 240 mm, accessories, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!
Details: 1 opened drum (tube: 1x7) - (1013 m) 1 opened drum (pipe: 7x14) - (718 m) 1 opened drum (pipe: 7x16) - (980 m) 1 opened drum (tube: 12x10) - (1490 m) 1 opened drum (tube: 7x16) - (150 m) 1 opened drum (tube: 12x10) - (270 m) 1 opened drum (tube: 7x14) - (172 m) 1 opened drum (tube: 12x10) - (216 m) ---------------------------------------------------------------------- Total: opened drums with tubes: approx. 5,009 m 1 anbr. Optical Cable (96f) - (2159 m) 1 anbr. Optical Cable (48f) - (2060 m) 1 anbr. Optical Cable (96f) - (4619 m) 1 Full Optical Cable (96f) - (3000 m) 1 Optical Cable (8223 m) 1 anbr. Optical Cable (24f) - (2219 m) 1 anbr. Optical Cable (192f) - (497 m) 1 anbr. Optical Cable (96f) - (1100 m) 1 anbr. Optical Cable (192f) - (1626 m) ---------------------------------------------------------------------- -------- Total: opened drums with cabl ...
Base frame RATIONAL LMZ300BA. BBA built in 2023, Various inserts GN 1/1, Visually maintained
Year of construction 2017, First registration 2018 very neat Passat GTE with full equipment (with parking heater, winter package, navigation system, trailer hitch, panoramic sunroof, etc., all assistants...) 4 summer tyres on aluminium rims (especially for electric vehicles) 4 winter tyres on aluminium rims Auction-ID: A1-48038-1
Jeep Kaiser M715 Year of Make: 1968 Power: 135hp Mileage: 68673km ; Engine: Inline 6 cylinders Displacement: 3.8 liters Transmission: 4 Forward + 1 Reverse (synchronized) and reduction gears Drive: rear/all-wheel drive (all-wheel drive engaged) Fuel: Gasoline Net weight: 2500kg Historical approval (§ 57 review every 2 years) Auction-ID: A1-48038-2
Power 15.0 kW, load capacity 5,000 kg, empty weight 5,398 kg, duplex mast, side shift, partial cab, battery charger STILL afx 30V/140A, discharged. Hours 3461 hrs
Lifting capacity 1,600 kg, empty weight 2,214 kg, duplex mast, side shift, partial cab, battery charger STILL ecotorn 24V/150A
FANUC 31iB control, power 29 kW, main and counter spindle, spindle speed max. 5,000/7,000 rpm, travel distances X/Z = 260/610 mm, 12-fold tool change turret with driven tools (VDI 40), max. turning diameter/turning length = 320/550 mm, workpiece ejection, discharged. Operating hours 320 hours, NOTE: The machine was not used in production and is almost as good as new!
GE-FANUC Oi-TC control, remote control, single-spindle machine, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 23,500
FANUC Oi-TD control, remote control, single-spindle, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 16,500
FANUC Oi-TF control, remote control, single-spindle, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 6,500
Control SIEMENS SINUMERIK 828d, travel distances X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-fold tool changer SK30, rigid groove clamping plate, chip conveyor KABELSCHLEPP, coolant device
FANUC Oi-TC control, 12-fold tool changer, max. spindle speed 5,000 rpm, power 25 KW, chip conveyor
Belt length 3,500 mm, electric drive, automatic. Clamping device, advanced roller raceway, L = approx. 4,000 mm
FANUC Oi-TB control, power 25 kW, 12-fold tool changer, max. spindle speed 5,000 rpm, chip conveyor
Tool changer turret, material ejection, control unit with analogue counting unit, bar feeder in front, L = approx. 3,000 mm,
Center width approx. 800 mm, center height approx. 150 mm, clamping bush, tool change turret, manual tailstock, power 4.0 kW,
500 €
