Tool changer turret, material ejection, control unit with analogue counting unit, bar feeder in front, L = approx. 3,000 mm,
Speed furnace LeChef 230v 3,000 watts purchased 06.2024 for approx. 4670 ? net, 1x pan square smooth bottom 260 x 260, 1x round pan 190 mm, 1x pan 240 mm, accessories, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!
Details: 1 opened drum (tube: 1x7) - (1013 m) 1 opened drum (pipe: 7x14) - (718 m) 1 opened drum (pipe: 7x16) - (980 m) 1 opened drum (tube: 12x10) - (1490 m) 1 opened drum (tube: 7x16) - (150 m) 1 opened drum (tube: 12x10) - (270 m) 1 opened drum (tube: 7x14) - (172 m) 1 opened drum (tube: 12x10) - (216 m) ---------------------------------------------------------------------- Total: opened drums with tubes: approx. 5,009 m 1 anbr. Optical Cable (96f) - (2159 m) 1 anbr. Optical Cable (48f) - (2060 m) 1 anbr. Optical Cable (96f) - (4619 m) 1 Full Optical Cable (96f) - (3000 m) 1 Optical Cable (8223 m) 1 anbr. Optical Cable (24f) - (2219 m) 1 anbr. Optical Cable (192f) - (497 m) 1 anbr. Optical Cable (96f) - (1100 m) 1 anbr. Optical Cable (192f) - (1626 m) ---------------------------------------------------------------------- -------- Total: opened drums with cabl ...
Base frame RATIONAL LMZ300BA. BBA built in 2023, Various inserts GN 1/1, Visually maintained
Year of construction 2017, First registration 2018 very neat Passat GTE with full equipment (with parking heater, winter package, navigation system, trailer hitch, panoramic sunroof, etc., all assistants...) 4 summer tyres on aluminium rims (especially for electric vehicles) 4 winter tyres on aluminium rims Auction-ID: A1-48038-1
Jeep Kaiser M715 Year of Make: 1968 Power: 135hp Mileage: 68673km ; Engine: Inline 6 cylinders Displacement: 3.8 liters Transmission: 4 Forward + 1 Reverse (synchronized) and reduction gears Drive: rear/all-wheel drive (all-wheel drive engaged) Fuel: Gasoline Net weight: 2500kg Historical approval (§ 57 review every 2 years) Auction-ID: A1-48038-2
Power 15.0 kW, load capacity 5,000 kg, empty weight 5,398 kg, duplex mast, side shift, partial cab, battery charger STILL afx 30V/140A, discharged. Hours 3461 hrs
Lifting capacity 1,600 kg, empty weight 2,214 kg, duplex mast, side shift, partial cab, battery charger STILL ecotorn 24V/150A
FANUC 31iB control, power 29 kW, main and counter spindle, spindle speed max. 5,000/7,000 rpm, travel distances X/Z = 260/610 mm, 12-fold tool change turret with driven tools (VDI 40), max. turning diameter/turning length = 320/550 mm, workpiece ejection, discharged. Operating hours 320 hours, NOTE: The machine was not used in production and is almost as good as new!
GE-FANUC Oi-TC control, remote control, single-spindle machine, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 23,500
FANUC Oi-TD control, remote control, single-spindle, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 16,500
FANUC Oi-TF control, remote control, single-spindle, speed max. 6,300 rpm, power 13 kW, 12-fold tool changer with driven tools (VDI 25), material ejection, max. turning length/diameter = 670/220 mm, max. passage 45 mm, control cabinet RITTAL, spec. W/h = 6,500
Control SIEMENS SINUMERIK 828d, travel distances X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-fold tool changer SK30, rigid groove clamping plate, chip conveyor KABELSCHLEPP, coolant device
FANUC Oi-TC control, 12-fold tool changer, max. spindle speed 5,000 rpm, power 25 KW, chip conveyor
Belt length 3,500 mm, electric drive, automatic. Clamping device, advanced roller raceway, L = approx. 4,000 mm
FANUC Oi-TB control, power 25 kW, 12-fold tool changer, max. spindle speed 5,000 rpm, chip conveyor
Center width approx. 800 mm, center height approx. 150 mm, clamping bush, tool change turret, manual tailstock, power 4.0 kW,
Center width approx. 800 mm, center height approx. 150 mm, clamping bush, quick-release device, tailstock
500 €
