Key data: 230 t, 4050 mm
Inv. Num. : 9288 Type: TruBend 8230 Producer: Trumpf Created: 2007 Parameters: Control system: CYBELEC ModEva 10 S Hours: 48682 h Number of bends: 1499173 Compressive force: 230 t Maximum bending length: 4050 mm Distance between frame walls: 3550 mm Number of axes: 5 (X/ X1/ R/ Z1/ Z2) Maximum distance between the table and the ram: 320-720 mm Maximum bending speed: 10 mm/s Maximum retraction speed: 180 mm/s Motor power: 22 kW Maximum stroke: 400 mm Machine height: 3520 mm Machine length: 6700 mm Machine width: 3590 mm Machine weight: 18900 kg
Key data: 130 t, 3550 mm
Inv. Num. : 9287 Type: TruBend 8130 Producer: Trumpf Created: 2007 Parameters: Control system: CYBELEC ModEva 10 S Hours: 48682 h Number of bends: 1499173 Compressive force: 130 t Maximum bending length: 3550 mm Stroke: 400 mm Number of axes: 6 (X1/ X2/ R1/ R2/ Z1/ Z2) pieces Maximum ram stroke: 320-720 mm Distance between frame walls: 3050 mm Maximum bending speed: 10 mm/s Maximum retraction speed: 180 mm/s Main motor power: 15 kW Machine height: 3088 mm Machine length: 5660 mm Machine width: 3590 mm Machine weight: 12700 kg
Key data: 85 t, 2550 mm
Inv. Num. : 9286 Type: TruBend 8085 Producer: Trumpf Created: 2007 Parameters: Control system: CYBELEC ModEva 10 S Hours: 48682 h Number of bends: 1499173 Compressive force: 85 t Maximum bending length: 2550 mm Stroke: 400 mm Number of axes: 6 (X1/ X2/ R1/ R2/ Z1/ Z2) Maximum distance between the table and the ram: 320 - 720 mm Distance between frame walls: 2150 mm Maximum bending speed: 10 mm/s Maximum retraction speed: 180 mm/s Main motor power: 11 kW Machine height: 3023 mm Machine length: 4730 mm Machine width: 3590 mm Machine weight: 8600 kg
TRUMPF TruMatic TC 6000 L-1300 punch laser machine was built in 2010 in Germany by TRUMPF Werkzeugmaschinen GmbH+Co. KG. The machine combines punching, laser cutting, threading and forming, enabling comprehensive sheet metal machining in a single work cycle. The use of all these technologies in a single system eliminates the need for additional machining on other machines, reducing machining times and increasing productivity. The TRUMPF TruMatic TC 6000 L-1300 is distinguished by its welded C-shaped design, which guarantees high stability under heavy loads. Its large work table has built-in balls designed for easy positioning of the material during machining. All operations are performed by means of a universal work head, combined with a 2 kW laser. It enables punching holes with a maximum diameter of 76.2 mm, cutting workpieces with a maximum thickness of 8 mm and threading in the M2 ...
Inv. Num. : 9234 Type: TruLaser 1030 Producer: Trumpf Created: 2024 Parameters: Control system: SINUMERIK 840D SL Maximum power: 10 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness when cutting (aluminium): 30 mm Maximum sheet metal cutting thickness (steel): 35 mm Maximum sheet metal cutting thickness (copper/brass): 12 mm Feed length Z-axis: 115 mm Source: TruDisk 10 000 W Machine height: 2200 mm Machine length: 9300 mm Machine width: 4700 mm Machine weight: 5500 kg Equipment: Cross and longitudinal conveyors Pallet Changer
Key data: 120 t, 3110 mm
Inv. Num. : 9174 Type: TruBend 3120 Producer: Trumpf Created: 2007 Parameters: Compressive force: 120 t Maximum bending length: 3110 mm Distance between frame walls: 2690 mm Machine height: 2330 mm Machine length: 3600 mm Machine width: 1750 mm Machine weight: 8300 kg
The machine is in good technical condition, testing is possible by prior arrangement. Machine length: 9300 mm (including pallet changer) Machine width: 4700 mm Machine height: 2200 mm Machine weight: 5500 kg Control unit SINUMERIK 840D SL Laser TruDisk 10,000 W Axis travel X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 115 mm Maximum material thicknesses Hot-rolled steel: 35 mm (O2) Mild steel: 25 mm (O2) Mild steel: 12 mm (N2) Mild steel: 8 mm (Air) Stainless steel: 40 mm (N2) Stainless steel: 25 mm (Air) Aluminum: 30 mm (N2) Copper: 12 mm (O2) Brass: 12 mm (N2) Closed protective cabin TruDisk laser motion unit Cutting unit Extraction unit Pallet changer Hydraulic unit Cooling unit Longitudinal conveyor Cross conveyor Media Power supply: 400 V / 50 Hz Power consumption: 63 kVA Fuse: 3 x 100 A Control voltage: 24 V Compressed air: 7–10 bar (7–15 bar for cutting) Nitrogen: 30 bar Oxygen: 20 ...
Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t
Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction
Inv. Num. : 9090 Type: Trumatic L3030 Producer: Trumpf Created: 2001 Parameters: Maximum power: 3 kW Switch-on hours: 49953 h Laser ON: 48307 Beam ON: 20858 s Work table length: 3000 mm Work table width: 1500 mm Source: TLF 3000 Turbo
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.
TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...
Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours
TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z ...
TRUMPF TruMatic 5000 R punching machine was built in 2001 in Germany by TRUMPF GmbH+Co. Maschinenfabrik. The machine has undergone regular maintenance and has been serviced on an ongoing basis throughout its lifetime. In 2025, among others, the oil pump, oil accumulators, head seals and transoms were replaced. The TruMatic 5000R is used for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching and marking, are performed with a force of up to 22 tonnes on a large brush table. The table has been specially modified to handle sheets with a maximum length of 4 metres. Its design prevents any scratches or scrapes on the surface of the sheet metal as well as significantly reducing noise levels. The balls built into the table also facilitate the loading and unloading of workpieces. The TRUMPF TC 5000 R CNC punching machine is extremely easy to opera ...
Trumpf TruMicro 6 kW laser source High-power disk laser with nanosecond pulses. The high-power nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies even at high frequencies. This allows you to remove layers and dirt at top speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining the same pulse duration The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for efficient and economical cleaning of tire molds. Large-area applications with high medium power Ablating, cleaning, tempering: The TruMicro Series 7000 lasers show their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous decoating rates. A scanner ensures excellent performance utilization. Flexible las ...
Manufacturer: Trumpf TYPE: TC L 2530 Year of Make: 2000 Working space / travel: 2580 x 1305 x 115 Weight: 8450KG Automation: Plate changer Laser: CO2, 2400W Strahlein: 29,000 hrs Laserein: 41,000 hrs Footprint: 6,500 x 4800 Accessories: Top ́s lite Plate changer Works flawlessly
TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...
A total of 4 linear guides, unused, complete and in original condition. Material number trump 1410234. To hand over spare parts due to the purchase of a new machine. Net price trump / piece 3040€. Immediately available.
TRUMPF TruDisk 3006 6C laser source was built in 2016 in Germany by TRUMPF Laser GmbH. This extremely versatile device enables a wide range of industrial machines to be supplied with a high-quality 3 kW laser beam. The beam has many applications in modern industry. It can be used to both weld and cut sheet metal made of, e.g. steel, copper, brass and highly reflective materials. Active laser power control guarantees 100% constant power over the entire service life of the device, regardless of ambient conditions. All components, i.e. beam guide, current supply, cooling system and control system, are of modular design. They have been optimally adapted to each other inside the compact housing. The small size of the housing also enables the device to be easily integrated with, e.g. robotic systems. All this makes the offered TRUMPF 3006 laser resonator extremely reliable and robust under ...
Offer 25515 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with CNC control DELEM , DA - Two-hand control panel with foot switch - Controlled crowning device - Back gauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported - Sharpening tool + V-die
Offer 25513 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with 5 axis CNC control DELEM , DA - Y1 + 2 ; X ; R ; Z - Two-hand control panel with foot switch - Controlled crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported
Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported
Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm
Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm
Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm
