used TRUMPF tkf

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

Welding edge shaper Offer number: 20122 Make: TRUMPF Type: TKF 104 - 0 Machine Number: 4522206 Built: ca.2006 Technical data: min. / max. material thickness 3 - 25.0 mm Bevel angle Standard 30 - 37.5 - 45 max. bevel length steel 400N/mm2 11 mm max. bevel length steel 600N/mm2 9 mm max. bevel length steel 800N/mm2 6 mm smallest inner radius 50 mm smallest pipe inner diameter 80 mm Working speeds 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

Welding edge shaper Offer number: 20120 Make: TRUMPF Type: TKF 103 Machine Number: 454106 Built: ca.1992 Technical data: min. / max. material thickness 3 - 25.0 mm max. bevel length steel 400N/mm2 10 mm max. bevel length steel 600N/mm2 8 mm max. bevel length steel 800N/mm2 5 mm Working speed approx. 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

Welding edge former make TRUMPF type TKF 100Mash. -No: 702592Max. Sheet thickness: 25 mmHelix angle: 15 - 60 °Max. Inclined position at 40 kg strength: 10 mmMax. Working speed: 2.5 m / min.Strokes per minute: 500Power: 1900/1400 WWeight approx: 14.5 kgPower connection: 220 V / 50 HzusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding edge former make TRUMPF type TKF 100Mash. -No: 702592Max. Sheet thickness: 25 mmHelix angle: 15 - 60 °Max. Inclined position at 40 kg strength: 10 mmMax. Working speed: 2.5 m / min.Strokes per minute: 500Power: 1900/1400 WWeight approx: 14.5 kgPower connection: 220 V / 50 HzusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electr. Welding edge former make TRUMPF type TKF 150Mash. -No: 784772Max. Sheet thickness: 32 mmHelix angle: 15 - 55 °Max. Inclined position at 40 kg strength: 15 mmMax. Working speed: 1.25 m / min.Strokes per minute: 300Power: 1900/1400 WWeight approx: 21.4 kgPower connection: 220 V / 50 Hzvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Helix length at 40 kg / mm ° max. 10 mm Power 1800 Watt 470 strokes / min.

Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg

220 V, 9.6 A, 2000 W MAXIMUM CHAMFER LENGTHS MAXIMUM CHAMFER LENGTH STEEL 400 N/MM² 15 mm MAXIMUM CHAMFER LENGTH STEEL 600 N/MM² 9 mm MAXIMUM CHAMFER LENGTH STEEL 800 N/MM² 6 mm RADII SMALLEST RADIUS 55 mm GENERAL WORKING SPEED 2 m/min STROKE RATE AT NOMINAL LOAD 370 1/min RATED POWER 2600 W SHEET THICKNESS 4 mm - 160 mm WEIGHT WEIGHT WITH HANDLE, WITHOUT CABLE 16.5 kg As good as new. Condition

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

3000 x 1500mm 6000w Auto pallet changer Siemens 840 Beam on: 17429 Laser on: 34280

TECHNICAL DATA: Work area: 2070 x 1280 mm Control: Bosch PNC-P Maximum punching force: 165 kN maximum sheet thickness: 6,4 mm maximum workpiece weight: 150 kg max cutting diameter: 76.2 mm advanced equipment: -Function multi tool -Sign -Function Multibend -Function Multishear TOP-Zustand! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

TECHNICAL DATA: Work area: 3.000 x 1.500 x 115 mm control: Siemens Sinumerik 840 D laser power: 3,200 watts maximum sheet thickness structural steel: 20 mm maximum thickness stainless steel: 12 mm maximum thickness aluminium: 8 mm STANDARD equipment: -closed machine frame with integrated laser unit -Laser unit: CO2 laser TLF 2000 high-frequency reflector telescope, cooling unit, maintenance-free Turbo centrifugal blower, logbook function angeregt -Automatic pallet changer -Longitudinal conveyor for small parts/waste -Drives: maintenance-free three-phase servomotors -Cutting head quick change facility -Laser cutting head with 5 "lens and laser cutting head with 7.5" lens -Cutting gas pressure setting can be programmed -APC capacitive height control and process control -automatic focus position adjustment of AutoLas plus -Laser power control -Position laser diode -HI-LAS high p ...

TECHNICAL DATA: Pressing force: 500 kN Bending length: 1,275 mm Free stand passage: 1,040 mm Stroke: 215 mm height: 385 mm Control: Delem DA-69 TS Velocity range in x 860 mm Table width: 100 mm ADVANCED FEATURES: Hydraulic top tool holder "Modufix" Substation stuff recording for single-V matrices with hydraulic clamping Preparation angle measuring system ACB Network card with BNC and RJ45 connector EoF6OROZg

TECHNICAL DATA: -Format: 3.000 x 1.500 mm -Year of construction: 2015 -LoadMaster incl. loading station and cow magnets -Magnet device to the LoadMaster -Establishment of special machine -suitable for TRUMPF TruLaser 3030 / 5030 -Machine had in reducing NC a 7, 000 h (Errors and omissions in the technical data, information and prices and subject to prior sale!)

TECHNICAL DATA: Work area 3.000 x 1.500 x 115 mm Control Siemens Sinumerik 840 D Laser power 4,000 watts Maximum sheet thickness mild steel 20 mm Maximum sheet thickness stainless steel 15 mm Maximum sheet thickness ALU 10 mm -maximum workpiece weight approx.: 900 kg -maximum speed simultaneously approx.: 140m / min - smallest programmable way mass approx.: 0.01 mm -Position deviation: +/-0.05 mm -Repeatability: +/-0.03 mm -Space requirement approx.: L 9,300 x B 4,600 x H 2200 mm -Approximate weight: 12,000 kg STANDARD EQUIPMENT: -Closed machine frame with integrated laser unit -Motion unit for high-precision machining Torque drive in combination with direct linear drives -Closed beam delivery -Cooling unit -Automatic pallet changer -Longitudinal conveyor for small parts / waste -Lighting of workroom -Position laser diode -Spraying device -PierceLine -Pla ...

TrumaSort R4 Sorting of productions parts in 4 standardized containers

TECHNICAL DATA: Work area 3.000 x 1.500 x 115 mm Control Siemens Sinumerik 840 D SL Laser power 5,000 watts Maximum sheet thickness mild steel 25 mm Maximum sheet thickness stainless steel 25 mm Maximum sheet thickness aluminium 25 mm Maximum sheet thickness copper 10 mm Maximum sheet thickness brass 10 mm Current hours of operation: laser-a: approx. 4819 STD / laser beam-a: 2242 hours STANDARD EQUIPMENT: -Automatic pallet changer with aengsfoerderband -Lighting of workroom -Position laser diode -Spraying device -PierceLine -FocusLine -NitroLine -PlasmaLine -Universal cutter with fully Adaptive lens system -ControlLine (treble and sheet metal outer edge detection) -Automatic switch-off -ContourLine -FastLine -FlyLine -Microweld -AdjustLine -Colour: Blue RAL-design 250 20 20 / white - NCS S 0505-R80B advanced equipment: -Solid state lasers TruDisk 5001  ...

REF.-No. 00461 Designation of the copier plant and coordinate punching machine manufacturer Trumpf model CN 700 year unknown Workspace 2000x1000mm force 4 mm sheet steel technical information plate below Technical condition of the goods due date immediately

Capacity: 120 t Folding length: 3100 mm CNC Brand: Delem TRUMPF - TruBend 3120 CNC Pressbrake 3100 x 120 Ton Y1/Y2/X/R Axis MACH - ID 6370 Make: TRUMPF Type: TruBend 3120 Control: Delem YOP: 2010 Hours: 9000 Max. bending length    3.100 mm Distance between column     2.550 mm Max. pressing force    120 T Dis. Beam – Table       470 mm Beam stroke         340 mm Approch speed     200 mm Working speed      180 mm Return speed         180 mm Number of controlled axis        4 Power       11 kW Length      3.600 mm Width       1.750 mm Height      2.330 mm Weight     8.300 kg

Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.

TECHNICAL DATA: Work area 3.000 x 1.500 x 115 mm Control Siemens Sinumerik 840 D Laser power 7,000 watts Maximum sheet thickness mild steel 25 mm Maximum sheet thickness stainless steel 30 mm Maximum sheet thickness aluminum 20 mm Hours of operation: NC a 31.300 h / beam a 15.100 h (Feb/2018) STANDARD EQUIPMENT: - Closed machine frame with integrated Laseragregat - Laser unit: CO2 laser TruFlow 5000 high frequency angeregt, maintenance-free Turbo centrifugal blower, cooling unit Logbuchbunktion - Automatic pallet changer - Longitudinal conveyor for small parts/waste - Drives: Gantry drive in combination with direct linear drives - Universal cutting head quick change facility UTI with fieldbus connection - Laser cutting head with a 250 mm lens - Programmable cutting gas pressure setting - ControlLine capacitive height control and process control - Automatic focus ...

Capacity: 130 t Folding length: 2690 mm CNC Brand: Delem MAKE   TRUMPF Austria TYPE     Trumabend V130 YEAR    2002 SPECIFICATIONS Controll      DELEM Pressbrake / Folding / Mech. / Hydr.   Pressbrake    Hydraulic / Mechanical    Hydraulic Bending length    3060 mm Distance between column   2690 mm Press force   130 Ton Throat   410 mm Stroke    365 mm Die height    535 mm Backgauge stroke X in mm    860 mm Number off controlled axis   6 Power    18.5 kW DIMENSIONS Length    4000 mm Width      3000 mm Height     2800 mm Trumpf CNC Pressbrake TRUMABEND V130, we have more Trumpf machines in stock.

TECHNICAL DATA: Working field 4.000 x 2.000 x 115 mm Control Siemens Sinumerik 840 D Laser power 6,000 watts Maximum sheet thickness mild steel 25 mm Maximum sheet thickness stainless steel 20 mm Maximum sheet thickness ALU 12 mm STANDARD EQUIPMENT: -Closed machine frame with integrated laser unit -TRUMPF laser TLF 6000 -Laser unit: CO2 laser, high-frequency unit, logbook function angeregt, -Automatic pallet changer and longitudinal conveyor belt -Drives: Gantry drive in combination with direct linear drives -Laser power control -HI-LAS high pressure cutting -Plasmasensorik PMS -Fast processing with SprintLas -ContourLas for making small holes -Cutting gas pressure setting can be programmed -Laser cutting head with 5 "lens -Laser cutting head with 7.5 "-lens" -Cutting head quick change facility -Capacitive height control (slides III) -Automatic ...

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...