vibra schultheis used for sale

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

Advantages of Aflatek Silent10-1: -Compact design. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 1x550 Motor speed, Rpm: 1440 Air supply, L/min: 70 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 50 Air tank, L: 10 Dimensions(length x width x height), mm: 520x200x470 Weight, kg: 16 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 560x240x515 Weight, kg: 17 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

max. wheel diameter: 150 mm gear width: 42 mm max. module: 3 min. module: 0,5 total power requirement: 10 kW weight of the machine ca.: 6 t External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features Built-in hydrostatic straight guide. Built-in raiser plate for raising the shaper head 130 m ...

Vibration tester for Electronic devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 2 Stück grinding wheel width: 20 mm bore: 16 mm grinding wheel diameter - width-internal grin: 200 x 25 x 20 mm grinding wheel speeds: 2850 U/min voltage: 230 V total power requirement: 0,45 kW weight of the machine ca.: 19 kg dimensions of the machine ca.: 525 x 335 x 295 m Industrial quality machine. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Advantages of Aflatek Silent50-2 EXC: -Water Separator -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 2x600(1200) Motor speed, Rpm: 1440 Air supply, L/min: 150 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 53 Air tank, L: 50 Dimensions(length x width x height), mm: 830x370x630 Weight, kg: 36 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 865x390x660 Weight, kg: 41 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

cutting diameter: 170 mm saw band length: 2085 x 20 x 0,9 mm cutting width: 180 mm cutting speed: 35 - 70 m/min : 110 mm : 90 x 90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70 x 70 mm : 185 mm : 180 x 180 mm drive capacity - workpiece: 0,75 kW range L-W-H: 1000 x 600 x 1500 mm weight of the machine ca.: 195 kg Sawing machine with base, European design. This machine is used for making small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp. No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw blade guide bearings. The sawing pressure can be adjusted through a hydraulic cylinder. Features: adjustable sawing pressure automatic stop with cooling system eccentric quick-acting clamp separate metal control panel 2-speed motor precision adjustment of the runners with material stop switch controlled saw blade cover gear whee ...

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 455 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 400 V total power requirement: 0,75 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm solid column to avoid vibration gear wheels in oil bat left and right turning precision setting for milling depth with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 445 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 230 V total power requirement: 1,1 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm ?solid column to avoid vibration ?gear wheels in oil bath ?left and right turning ?precision setting for milling depth ?with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 1 Stück grinding wheel width: 19 mm grinding band dimension: 100 x 1150 mm turning speeds: 2850 U/min saw band speed: 30 m/s grinding wheel size: 200 x 19 x 20 mm grinding wheel speeds: 2850 U/min grinding band dimension: 100 x 1000 mm total power requirement: 0,75 kW weight of the machine ca.: 31 kg Heavy duty universal grinding and sanding machine in industrial quality. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. Supplied with additional polishing disc and steel brush. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection steel brush grinding belt polishing disc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

tube diameter: 16 - 76 mm grinding band dimension: 100 x 2000 mm Band Speed: 30 m/min. voltage: 400 V angle adjustable from - to: 30 - 90 Grad power capacity - grinding motor: 2,2 kW range L-W-H: 1250 x 700 x 12500 mm weight: 170 kg Standard Accessories For tubes and profiles made of metal Simplified opera on by twistable grinding fixture Adequate for tube diameter from 1/ 2” to 2 1/ 2” Quick adjustment for grinding angle 30° – 90° Powerful motor 2,2 kW / 380 V Abrasive roll easy and fast changeable Because of tape speeds of 30m/s perfect fi ng for steel and material Vibration reduced stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This  ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 1.5 mm Max. grinding diameter: 100 mm Width of the grinding wheel: 200 mm Max. workpiece length for infeed grinding: 200 mm Grinding wheel: diameter new wheel: 406 mm Width: 200 mm Bore: 203 mm Regulating spindle: diameter new wheel: 270 mm Width: 200 mm Bore: 140 mm Speeds: stepless from: 10 rpm up to: 250 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 15 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 2020 mm Width: 1300 mm Height: 1420 mm Various accessories: Touch screen Set of flanges Grinding wheel Vibrating / oscillating conveyor Full splash cabin

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Vibrating table FKS JL-350

REM Foundry is built on a 10.000 sqm surface and a further 7.000 sqm added in 2010. The Foundry was designed to manufacture castings made to customer specifications. Here were casted parts ranging from 1 tone up to 50+ tones, for industries like: wind mills, heavy machine tools, mining, energetic etc. At full capacity, the foundry is able to produce over 1200 tones of castings per month. All the machines in the Foundry come from top suppliers such as Inductotherm Europe and IMF Italy, are enviroment friendly and respect all the EU regulations. - medium frequency induction furnace: maximum capacity - 28t - medium frequency induction furnace: maximum capacity - 23t - conveyor carrier for cores - vibrating table for cores - silos with a capacity of 550t - continuous mixer for moulds with maximum capacity of 60t/h - continuous mixer for cores with maximum capacity of 10t/h - sh ...

Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )

Zipper end piece press, with vibrator feeder

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.

Pneumatic riveting machine make VTS type 120-4 / 100.10Machine -No: 120.457.08 built in 2008Technical specifications:Max. Rivet diameter: 4.0 mmPressure force: 8 kN at 4 bar / 20 kN at 10 barAir consumption: 0.5 l / stroke at 4 barCycle time: 1.0 sec.Working height: 900 mmDimensions approx.: 500 x 500 x 1500 mmWeight approx: 120 kgWith- Festo pneumatic control- vibratory conveyor- Punch and pliers feed- foot switch- UVV (finger protection)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Format range: 1350 mm, min 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point bonding, electronic upper glue unit HHS Xpect YOC 2017, 8 channel with 4 application heads, disc glue on the left, new electronic servo overtaking system with touchscreen, Feeder with clock control and vibrator, feeder belt with Quick adjustment, pre-breaker right and left, kicker, counter, digital position indicators, additional means transport in the Pre-crusher top/bottom, folding floor module 150 with additional Medium transport top/bottom, additional means transport in folding, Jagenberg DBS01 control, motorized threading station, Video surveillance in the transfer station, fully automatic Format setting Jagset 2, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.

Over-drawing machine Model: IKM 220 with chocolate wheel for pastries of any kind and cakes up to a height of 10 cm Lattice band width 220 mm Capacity approx. 20 kg chocolate Belt speed infinitely adjustable Floor tuners, blowers and vibrators Run-out belt with paper roll Machine mobile Additional heating, veil box Heating oven for 1 heated tub below ( max. 30 kg ) Working direction from right to left Stainless steel Connection 220 V / 1.7 kW Used machine cleaned and tested

Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Specifications: 1. Bowl Diameter (mm) 220 2. Bowl Length (mm) 880 3. Length Diameter Ratio 4. Bowl Shape Cylinder Cone 5. Rotation Rate of Bowl (r/min) 5000 6. Relative Centrifugal Force 3076 7. Scroll Conveyor Lined with tungsten carbide hard alloy Single end, Left cycle rotating 8. Main Motor (kW) 11 9. Back drive motor (kW) 5.5 10. Operation mode 24 hours/day 11. Overall Weight (kg) 100 Control Panel: 1. Standard control panel PLC controlled, 2. Basic System with 7” color touch screen – I/O modules Variable Frequency Drive for main and back drive 3. Bearing temperature sensors 4. Vibration Sensor Material of Construction: 1. Screw conveyor SS316L 2. Bowl SS316L 3. Gearbox 40CrMo 4. Bowl ribs SS316L 5. Machine base fine carbon steel (parts in contact with material are coated with SS316L) 6. Shell SS316L 7. Safety cover SS316L 8. Main b ...

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

7pcs Zeta REV HP XT 18.4 master-slave control 1 piece Zeta REV HP XT 12.4 Zeta REV HP XT 18.4 / EC 1P - hydraulic module with one pump LN - Soundproofed RUB - Shut-off valves compressors BC - Storage capacitor for electronic expansion valve VEC - EC Fans FVP - Flowzer VP FVDE - FLOWZER VDE RA - Antifreeze Heater PBA - BaCnet™ protocol on TCP-IP FM6 - Multilogic function for master with management of up to 6 slaves 1 of 7 and 7 slave SETV - Variable setpoint shift above 0-1V, 0-10V, 0-4mA or 0-20mA Signal RMMT - Voltage Monitoring IACV - Circuit breakers for Compressors and fans A43 - Power supply 400/3/50 AG - Rubber vibration dampers RAV - Antifreeze heating resistor for Condensate collection basin and Zeta REV HP XT 12.4 / EC 1P - hydraulic module with one pump LN - Soundproofed RUB - Shut-off valves compressors BC - Storage capacitor  ...

technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

Complete Printshop for sale: Booklet Maker SDD BLM 6100 corner punch Beier Multinak-S Perforator Hang Maschinenfabrik Type 136D Grooving and perforating machine E. Bickel HK 3/68 Rotaprint R40 AK Cutting machine Polar Moor 90EL (this has to be taken apart for removal) mini gathering machine Duplo DC-10 Pallet truck 114 cm fork trolleys (10 pieces) 2-tier trolley (3 pieces) 4-tier trolley (1 piece) vibrating table (1 piece) Package Price: on request

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

New machine 24 months warranty Advantages: + TOP price-performance ratio + immediately available, approx. 3-4 working days delivery time + compact, powerful planetary mixer as table model + variable speeds adjustable via rotary knob + with plastic protective cover + Machine stands on 4 vibration-absorbing adjustable feet + Swivel head for easy removal of the boiler + available in 5 different colours + fast spare parts supply within 1-2 working days SERIEN accessories, included in the price: - 1x 7 litre stainless steel boiler - 1x whisk for 7 litre boilers - 1x flat stirrer for 7 litre boilers - 1x dough hook for 7 liter boiler SPECIAL ACCESSORIES, optionally available at extra cost: - additional 7 litre stainless steel boiler (surcharge: 65,-- € net) - additional tools: --- whisk (surcharge: 46,-- € net) --- flat stirrer (surcharge: 38,-- € net) --- dou ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph

TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...

Format range: max. 1350 mm, min. 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 + 6 point gluing, HHS electronic finishing unit, 4 channel with 4 application heads, High pressure, disc gluing unit left, electronic Overhaul folding with servos, extended folding station, module 150, Primary crusher right and left, kicker, counter, vibrator on the jetty, digital position indicator, motorized threading station, motorized Transfer station, additional means transport in folding, vacuum on Overturning, camera surveillance, Jagenberg DBS 01 control, fully automatic format setting Jagset II, pneumatic, clocked Press strip. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belt. Other: The machine can be viewed while running by appointment.