vibra schultheis used for sale

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 10 litre stainless steel boiler - 1x whisk for 10 litres boiler - 1x flat stirrer for 10 litres boiler - 1x kneading hook for 10 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

- Vibration measurement - Balancing in one level - Balancing in two levels - Iterations Method - Trans-red method - Machine weight: 15 kg - Condition: very good Details well-maintained vibration measuring device

Trench roller Rammax with new motor. The engine was installed in 2011 for approx. 1900.-EUR nez. 0sgok2qa Technically ready for immediate use. 2 Vorwaerts and two Rueckwaertsgaenge 2 Vibrating staerks All-wheel drive

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 40 litre stainless steel boiler - 1x whisk for 40 litres boiler - 1x flat stirrer for 40 litres boiler - 1x kneading hook for 40 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

Laboratory pelletization plant PE, PP, PS, ABS, degassing, engine: 20 kW, concoder, screw diameter 35 mm, L/D, degassing, pressure transducer, vibrating dosing, strand nozzle, water bath, strand granulator. Power: approx. 60 - 80 KG/hr

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Continuous stainless steel mixer Content 400 litres Vibrator Interior cladding made of a plastic sleeve

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 20 litre sta ...

Rachner R 800 PA/RS; workshop overhauled; new vibrating motor; new hydraulic lines; Ventilation; Shaking elfinction; Side ruler; Format 600x900mm; Load capacity 800kg; Delivery time approx. 6 weeks. Pile turner Rachner R 800 PA/RS; The new jogging motor; new hydraulic hoses; airing; jogging; adjustable aligning gauge; size 600x900mm; carrying power 800kg; delivery time 6 weeks.

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 40 litre stainless steel boiler - 1x whisk for 40 litres boiler - 1x flat stirrer for 40 litres boiler - 1x kneading hook for 40 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 40-litre sta ...

Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 60 litre stainless steel boiler - 1x whisk for 60 litres boiler - 1x flat stirrer for 60 litres boiler - 1x kneading hook for 60 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 60-litre stainless steel boilers - additional ...

Bausch Stroebel KS 1010 machine for injection vials Bausch Stroebel brand for injection vials from approx. 3. f00 vials/h, fully automatic, consisting of: Brand: Bausch Stroebel Model: KS 1010 Stainless steel crimper version for 16-45 mm vials, height 25-80 mm, speed according to product max. 3,500 vials/h. Includes 1 metal lid vibrator, staple station. The team is provided with its anti-cancer protections, monitoring the presence of the lid and its alarms.

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + hydraulic boiler stroke with two safety switches + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 80 litre stainless steel boiler - 1x whisk for 80 litres boiler - 1x flat stirrer for 80 litres boiler - 1x kneading hook for 80 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - ...

Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Gnocchi factory 1. Cooking kettle Glass pro3, 500 l, tilting, mixing 2. Bin hoist for 200 bins feeding the former 3. Former Sandore NF 100c 8.5 kw 4. Feeding conveyor for vibrating Tunel 5. Vibration tunnel Sarp str 410 4.7 kw 6. Waste and water separator Sarp Filtro 7. Feeding conveyor for multi head weightier, z type 8. Platform for weigher 5000x5000 mm 9. 10 head weigher BVBA 01AAH-WS 10. Packer Tiromat BL-150 ET422N 11. Ready product conveyor

Private sale Item condition: maintained Availability: immediately Coating band: yes ChocoTemper is part of the product line of the ICB Tecnologie chocolate temperature control device, with a tub capacity of 24 kg. Both machines can be equipped with vibrating table, while the coat straps for Chocotemper 24 are available • Stable stainless steel frame • Two independent motors, one for the screw and one for the agitator, for a longer life • Standard, removeable screw for easy cleaning and a quick change of chocolate • Control of the chocolate flow with pedal possible • Touchscreen control panel with various options: - Automatic dosages for a good way to do the right chocolate. - Night mode to keep the chocolate dissolved and reduce consumption during downtimes. - Counter-rotation of the screw, which is useful during cleaning The Chocotemper 24 chocolate temperature contro ...

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...

Aggregate screening line. Year of production (installation) - 2004 Installation capacity - 4 t / h Grain size of the screened material 0 - 6mm The line includes: 1. Storage silo - 20 tons 2. Raw material hopper 3. Vertical bucket conveyor PK-250-200 / 9200 - manufacturer WAKRO Sp. Z o.o 4. Vertical bucket conveyor PK-250-200 / 8000 - manufacturer WAKRO Sp. Z o.o 5. PKS-200/4200 screw conveyor - manufacturer WAKRO Sp. Z o.o 6. PKS-200/2800 screw conveyor - manufacturer WAKRO Sp. Z o.o 7. PKS-250/2515 screw conveyor - manufacturer WAKRO Sp. Z o.o 8. PKS-250/5300 screw conveyor - manufacturer WAKRO Sp. Z o.o 9. Ball mill 10. Air filter FPK-23/25 - manufacturer WAKRO Sp.z o.o 11. The PWL2-1 / 2,2-Ew2 linear vibrating screen - producer NOWET Sp.z o.o

Stand unit with steel plate with C99 control Measuring ranges: x=5000 mm, y=2600 mm, z=2100 mm Measuring plate: 6000 mm x 3000 mm Rotary swivel head RDS for TP Control panel Dynalog Travelling control unit on the stand, opto-coupler, screen, keyboard, mouse Active vibration damping Without software and hardware. We reserve the right to make changes and errors in the technical data as well as to make the interim sale. Price plus transport and installation.

pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...

Stacking-wening Rachner F 1000 PA/RS; werskstatt overhauled; Format 800x1280mm; Opening width 1330mm; Load capacity 1000kg; Blowing air; Vibrators; Side ruler; Ionization for blowing air. Pile turner Rachner F 1000 PA/RS; The size 800x1280mm; max.pile height 1330mm; carrying power 1000kg; airing; jogging; adjustable aligning gauge; ionisation for air.

Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm

USED STAINLESS STEEL 1700 LITRES IPROCOMSA V MIXER REF#: C4291 1700 liter V mixer manufactured by Iprocomsa in stainless steel mounted on stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With documentation and electrical panel. Dimensions: Inlet(x2) .. ø 580 mm Outlet flange ... ø int 250 mm ø ext 395 mm Total height .. 2910mm (when the mixer is spinning) Total height without turning: .. 2510mm Total length: ... 4010mm Total width: ... 1300mm Valve outlet to ground: ... 310mm General characteristics: Manufactured by IPROCOMSA Model B-1000 Type V mixer Material Stainless steel Year built 1998 Technical characteristics: Capacity 1700 L

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Used vibrating sieve. It has 3 sets of replaceable bowls and filter inserts, which allows for a quick change of the filtered medium. New, Italian-made vibrating motor with wide the ability to set the vibration range, which allows you to optimize device performance. The package includes a starter set of stainless steel filter nets with the following dimensions: 10000, 6500, 1500, 900 meshes / cm2.

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: Allen Bradley PanelView Plus 1000 Technical data Min. internal grinding diameter: 3 mm Max. internal grinding diameter: 50 mm Centre height: 240 mm Grinding spindle head: speeds: from: 350 rpm up to: 1200 rpm Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2300 mm Dimensions of the control: Length: 450 mm Width: 1000 mm Height: 2400 mm Various accessories: Touch screen Wheel trueing attachment Vibrating / oscillating conveyor Status light Loading attachment Parts catcher Switch cabinet Air conditioner

Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph

Round vibretion feeder #4458 Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Diameter: 900mm Adjustable vibration

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

Chocolate bar casting plant A complete chocolate bar casting plant 2011 and works perfectly. The plant consists of a dosing filling machine Knobel with vibrating table, spiral cooler, conveyor belt, cascade temperer from LCM with filling system into the filling machine. A 2-ton tank with pipe system, magnetic detector and pump for the tank must also be filled. chocolate bar wrapping machine from Sapal

Other Info: CNC Double Coloumn Measuring machine MAKE   ZEISS West Germany TYPE    UMC 850 S YEAR   1995 DIMENSIONS Length    2400 mm Width     1900 mm Height    3050 mm X Travel      : 1.400 Y  Travel      : 1.200 Z Travel      : 600  Distance between column : Vertical daylight   :    780 Table length         : 2.120 Table width          : 1.400  Over all dimensions  Length        : 2.200 Width         : 1.900 Height        : 3.030 Weight       : 3. ...

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER

Type: Ultrasonic welding machine #4711 Manufacturer: Telsonic #4709 Model: USP300+MPS-4+DHG2030 USP3000 vibration unit MPS4 controll unit DHG 2030 generator P1 pneumatic unit Frequency 20kHz Power 3000W Dimension : 850x700x2400mm Machine weight: 230 kg

Area: 1800 x 2000 mm

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...

vacuum cleaner Model: 923-623 Professional vacuum cleaner for bakery and pizzerias Especially for ash, soot, dust and debris from the oven Stainless steel tank max. 65 liters Heat-resistant hose, brush and polyester filter Stainless steel ring for filter protection with filter vibrator Connection 230V, 3200 watts New device Oven dust clean with 12 months warranty Visit our Milbrandt Shop!

Weighing with maximum flexibility The larger counterpart to the 1-head scale is suitable for faster manual filling, as well as for small automations. Application: Dose free-flowing products in accurate quantities. Suitable for manual filling and automation Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 2 • Volume weighing container: 4.5 liters • Bunker volume: 35 liters • Weighing range infinitely adjustable between 50 and 3,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 30 w ...

Cold water high-pressure cleaner with 4 kW power 170 bar pressure and 14 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High-pressure jet pipe with nozzle Optional (additional cost): - Hose reel with 15 m hose The images c ...

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...