vertical turning used for sale

ID3598 Geotec Rotomax L year/Baujahr 2012 Crawler drilling rig, drilling mast stroke length 4300 mm, pulling force 46.5 kN, contact pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shock tongs, support clamp 50-324 mm diameter, cable winch, centrifugal pump, mast extension 810 mm Crawler drilling rig, drilling mast stroke length 4300 mm, tractive force 46.5 KN, pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shocking pliers, interceptor clamp 50-324 mm diameter, winch, centrifugal pump, mast extension 810 mm

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm

Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness  ...

Vertical tank made of stainless steel with a capacity of 650 liters. Top klopper bottom with feed flange Body with 3 flanges Bottom klopper with discharge flange Mounted on 3 legs General characteristics: Guy Vertical tank Material Stainless steel Year of manufacture 2003 Weight 160 kg Technical features: Design pressure: 7 bar Test pressure: 10 bar Design temperature: ambient Characteristics of the flanges: Top bottom: Power supply: DIN2576 PN10 DN15 AISI316L Body For visual level: x2 DN25 PN10/40 AISI316L DIN2576 PN10 DN15/21.3 AISI316L Bottom bottom Download: DIN2576 DN15 PN10 AISI316L Specifications: Volume 650 l Background type Klopper Envelope 3 legs Upper bottom tubulatures x1 Lateral tubulatures x3 Lower bottom tubulatures x1 Outer diameter body 600 mm Body height 2000 mm (TOTAL: 2700 mm) Lower exit height 190 mm

Vertical tank made of inozidable steel with an approximate capacity of 220 liters. Flat top bottom with removable lid and manual closures. On the lid there is a man's mouth with manually folding lid, tubulaadura with NW type thread and tubuladura with inner thread. Inclined flat bottom with flange for discharge. Mounted on 3 legs. General characteristics: Maker SCHRADER Material Stainless steel Upper bottom tubulatures: Thread NW outer diam 65 mm - inner diam 38 mm Inner thread junction 30 mm Lower bottom tubulatures: Discharge flange: 97 mm outer diam - 38 mm inner diam Specifications: Volume 220 l approx. Background type Slope Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth 300 mm Outer diameter body 600 mm Body height 850 mm

Vertical tank manufactured by GIUSTI in stainless steel with a total capacity of 198 liters and a useful volume of 160 liters. Domed upper bottom bolted to the body with 4 clamp connections and 2 handles. Lower bottom bulged with discharge from the bottom by valve. Clamp output connection. On structure with wheels. General characteristics: Maker GIUSTI Guy Vertical tank Material Stainless steel Year of manufacture 2007 Design pressure: -1/+1 bar Design temperature: 150 ºC Working conditions: 0.5 bar at 30 ºC Test pressure: 1.7 bar at 10+-5 ºC Specifications: Volume 160 L (TOTAL: 198 L) Background type Convex Envelope Wheels Outer diameter body 600 mm Body height 550 mm

Vertical tank manufactured by SKERMAN in stainless steel with a capacity of 100 liters. Domed top bottom with 1 peephole and 4 clamp connections Bottom bulged with discharge from the bottom and propeller-type agitation of 4 blades. On 4 wheels. General characteristics: Maker SKERMAN Guy Vertical tank with agitation Material Stainless steel Year of manufacture 2009 Design pressures (min/max); empty / 1.1 bar Design temperature: (min/max): +5/+25 ºC Test pressure: 1.6 bar Specifications: Volume 100 L Background type Convex Type of agitation Propeller Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x4 clamp Lower bottom tubulatures x1 Outer diameter body 700 mm Body height 250 mm

Vertical tank made of stainless steel with a capacity of 100 liters. Domed upper bottom screwed to the body with 2 peepholes, 3 clamp connections and motor for agitation. Conical bottom with discharge from the bottom. It has a pump located under the lower bottom for the recirculation of the fluid. On 4 wheels. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 L Background type Bulging sup. - conical inf. Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x3 Lower bottom tubulatures x1 Peepholes x2 Outer diameter body 750 mm Body height 250 mm

Vertical tank made of stainless steel with a capacity of 150 liters. Domed upper bottom with 6 clamp connections and 2 ears for elevation. With a side entrance. Lower bottom bulged with discharge from the bottom by valve and propeller-type agitation without motor. On 4 wheels. General characteristics: Guy Vertical tank with agitation Material Stainless steel Specifications: Volume 150 L Background type Convex Type of agitation Propeller Envelope 4 wheels Ears x2 Upper bottom tubulatures x6 clamp Lower bottom tubulatures x1 Outer diameter body 550 mm Body height 600 mm

Vertical tank made of inoxidbale steel with a capacity of 500 liters. With half a cane, calorifugated, on 3 legs and with a manually folding lid. Sloping bottom. General characteristics: Material Stainless steel Specifications: Volume 500 L Background type Inclined bottom Half a cane + Lagging + Envelope 3 legs Outer diameter body 900 mm (TOTAL: 1,300 mm) Body height 800 mm (TOTAL: 2,000 mm)

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

Control: Siemens 840D Shopmill Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 14 Z - Travel mm: 510 Y - Travel mm: 510 X - Travel mm: 835 Rapid traverse m/min: 30 Tool holder: SK 40 Table load: 800 kg Clamping surface mm: 1,000 x 560 Base area of the machine mm: 2,100 x 2,700 Machine weight approx. kg: 4,200 Linear scales Axis A Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy SPINDLE BEARINGS NEW!

Control Heidenhain ... TNC 640 Clamping table surface ... 1200 x 500mm Axis X ... 1040mm Axis Y ... 540mm Axis Z ... 600mm Spindle speed ... 12000-_/min. controlled axes ... 3 cooling... 25bar SK 40 workpiece weight... 800kg Magazine slots ... 24 L x W x W ... 2900 x 2420 x 2840mm Machine weight... 6400kg The machine is in good condition, possible to test under power.

Used DSI V-3 36/100 vertical plate freezer on Freon / NH3 with 36 stations. the freezer can be set to 3 different sizes per station with dividers. This makes it possible to freeze different products per station. Inner dimensions 1 station: 1060x100x480 mm (LxWxH). Capacity and example based on: 51,9 kg fish fillet per station. 36 x 50,9 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 185 min Evaporation temperature of -34°C. Fish fillet: 605,9 kg/hr Capacity and example based on: 48,3 kg plat and herring per station. 36 x 50,88 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 190 min Evaporation temperature of -34°C. Plat and herring: 549,5 kg/hr For more information please feel free  ...

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

ID3679 Atlas Copco Mustang A66 CBT-HD year/Baujahr 2000 approx. 16.310 hours/hours 15 t Drilling rig, carriage BMI 6.7 (length 8750 mm, travel 6700 mm), drill head S1300, engine Deutz BF4M1013, diesel engine replaced at 10200 hours, hydraulic pump is new (drive wheel still needs replacing), generally good condition, regularly serviced (service records available) Drilling rig, mount BMI 6.7 (length 8750 mm, 6700 mm travel), drill head S1300, engine Deutz BF4M1013, at 10200 hours the diesel engine was renewed, hydraulic pump is new (drive wheel still needs to be replaced), generally good condition, service has always been done (service certificates are available)

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

M. No.: 700571/99-280108 Working width max. (mm): 660

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Qty. 1 Second-hand vertical electrostatic powder painting line for Aluminium profiles – still in production Mfc.: SAT, GEMA, Siemens Built: 2017 Type: vertical powder coating line Profile dimensions: 7000 x 100 x 200 mm - H x W x L Weight of profiles: 30 kg/each max. Max. productivity: 676 pcs/h Conveyor speed: 1.5 m/min. Hanging pitches: 66, 100, 133, 200 mm Total electric power: 215 kW, 400 V, 3ph., 50 Hz Total thermal power: 350.000 kcal/h Compressed air – pressure required: 7 bar Water flow rate required: 500 – 1000 L/h Scope of supply: Pre-treatment tunnel Tunnel main tank made from PP Drying oven Curing oven V- shaped painting booth Vacuum cleaning unit Aerial conveyor Control panel

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

ID3737 Nordmeyer on Unimog Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled in the last 3 years for approx. €40,000 (power swivel, hydraulic pumps, main gearbox for engine overhauled, new flushing pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled the last 3 years for about 40,000 euros (power turntable, hydraulic pumps, main gearbox for engine overhauled, new mud pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg

Vertical machining center Chiron FZ08W :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 21M Tool connection: HSK 32 Spindle power: 3,7Kw Number of spindle revolutions: 15000 Number of tools: 12 X Axis Stroke: 300mm Y Axis Stroke: 250mm Z Axis Stroke: 250mm Rapid feeds linear axes X Y Z: 40 40 60m/min Guides: roller Pallet change: yes Pallet size: 550 x 300mm Maximum load allowed: 200Kg Rotopallet: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2600mm Width: 1400mm Height: 2100mm Weight: 2200Kg

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...