subcategories
(3rd category level)
Manufacturer:
(Category: 210)
cutting range min.: 250 - 2200 mmsaw blade diameter: 250 x 20 mmcutting range: 50 x 70 mmmitter cutting - all-position: 90 u 45 °total power requirement: 2 x 1,1 kWweight of the machine ca.: 0,42 tdimensions of the machine ca.: 2,94 x 1,15 x 1,22 mIncluding positioning controlIncluding electronic measuring rodWe connected the machine, but unfortunately couldnt operate it because we are unfamiliar with it.The hoses should be replaced because air is leaking from some of them.Feel free to come by and take a look in person.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mm# 6726 Weinig Unicontrol 12 CNC--------------------------------------------------------Sale on behalf of a customer. Machine connected and ready for demonstration.crosscut saw--------------------------------------------------------Crosscut saw electronically, horizontally infinitely adjustableNumber of tools: 1 pc.Spindle speed: 3000-6000 rpmSpindle diameter: 40mmTool diameter max.: 400 mmMotor power: 3 kWLaser guide light to identify the saw section rounding aggregate--------------------------------------------------------Posit ion: horizontally belowMotor power: 1 kWSpindle diameter: 20mmSpindle speed: 9000 rpmTool flight circle max.: 130 mmelectronic length stop, length: 3500 mm--------------------------------------------------------1. tenoning Spindle------------------------------------ ...
Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA: Pneum cross-cut saw. clocked (3 KW) with laser directional light Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW Synchronous spindle 50 x 120 mm - motor 7.5 KW Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW Feed adjustable from 6-12 m/min. - Motor 1.1 KW Screen control for 99 window types Support strip for rung production pneum. Timed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Milling device with support rail Return transport device to the machine operator Machine complete with operating instructions, circuit diagrams, spa ...
Working width: 4500 mmWorking height: 3000 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5500x1400x3550 mmWeight: 3000 kgS&S frame press Bavaria 2000 L, built 2026---------------------------------SHORT TIMED availabe exw warehouse Engelfried, 73447 OberkochenNEW for the Holz-Handwerk 2026 trade fair in Nuremberg:Now also with semi-automatic positioning of the verticalpress cylinders 1, 2, and 3 via enabling switch,including ON/OFF selector switch for beam 2With automatic pressing cycle + manual controlfor corner connections tenon+slots and dowel connection/mortised tenon,can be switched using a selector switch on the control cabinet.With basic equipment for optional use of counter profiles if the sash is rebated on the loose part.CE versionBasic machine in the strongest frame welded construction,with thick-walled special hollow profiles.Guideways of the pressure beams for the press cor ...
Number of motors: 2 Stück0: 3000 mmControl: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mmWeight: 800 kgHECHT Double Miter Saw Exenso DS350E - 3000 mm--------------------------------------For wooden glazing beads, mullions, profile strips, aluminum strips, etc.Item 1.1 Article number 942.51031 pc. HECHT Exenso DS350E- Working length 3000 mm- Swivel range 22.5° (inside) to 135° (outside)- Right head movable- Saw blade holder Ø 350 mm- Includes 1 pc. center support.- Pneumatic clamping of the components.- Exenso DS3 positioning control with 15 touch panel display in adustproof monitor housing.- 3-axis control, 1 longitudinal axis and 2 swivel axes.- Manual input of cutting data- Processing of data from a cutting list (data set according to specifications)- Processing of measuring rod data (GMF wireless caliper)- Ethernet connection 10/100 (TCP/IP)- USB interface- Includes c ...
dimensions: Auf Anfrage weight: Auf Anfrage Available: Auf Anfrage Various used spare parts or complete units, control systems and control cabinets for Weinig Univar (and others) always available.Please contact us.Sample pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenon cutting and slitting machine No further data known
Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...
Table dimensions: 1000,400 mmpneumatic clamping: 4 St.moveable: ja For fast compression of Minizinken- or Softline compoundsespecially for larger cross-sections- Independent of the angle- Especially suitable for arched manufacturing- Table size 1000 x 400 mm- Pneumatic connection 10 bar- Air consumption 1 cdm / stroke- 4 clamping cylinders for workpiece clamping- Pairs switchable- Right half of the table supported on hardened shafts through ball linearbearings- 2 pressure cylinder for linear table displacement, separately switchable- Weight: 200 kg- CE - execution(Technical details according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: CNC, Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 450 ...
Number of machnines: 4 StControl: Siemens Tool changer: 1 PosPlant Consists of 4 MachinesSoraluce FR 9000ISoraluce RR 9000IISoraluce FP 8000Soraluce PM 6000Workpiece Setup StationsReplacement PalletsAutomatic Tool Supply System (WBG)Automatic Pallet SystemPallet Storage RackThe technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively.About UsMore than 400 of our own machines in stockOver 15,000 m² of warehouse space, 70-ton crane capacityMore than 10,000 accessories for your workshopIf you want to sell machines, production lines, or your business,please contact us.Further offers can be found on our website.Viewings are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...
Dimensions (L/W/H): 4150x1200x1650 mmWeight: 450 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width from to: 80-120 mmWorking height from to: 30-80 mm: 1200-1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 3 St.Number of tools: 8 St.Spindle diameter: 50 mmDimensions (L/W/H): 4250x1850x2300 mm! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs.> length of spindle: 120 mm> number of revolutions: 6000 rpm> spindle diameter: 50 mm> tool diameter max.: 232 mm> engine: 11 kW2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm> spindle stroke vertical: variabel, CNC > number of revolut ...
Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!
bore capacity in steel (diameter): - mmarm length: 1600 mmworkpiece height max.: - mmtaper MK: 5 total power requirement: - kWweight of the machine ca.: 3 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: max 1500 mmtaper MK: 5 weight: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 1200 mmtaper MK: 4 bore cube: ja weight: 2,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mm1 used Weinig Unicontrol 6 window system----------------------------------------------Manufacturers description:For the production of individual parts, elements, and small series.Spindle arrangement:One cross-cutting saw, one single-sided tenoning and slotting spindle,one right-hand profiling spindle, one tenoning and slotting spindle, andprofiling spindle suitable for holding multiple tools stacked on top of eachother, with pneumatic spindle movement.Slotting table with motorized table movement and automatictransfer to the continuous, chainless rubber roller feed of the profiling unit.Feed height adjustment manually.Workpiece clamping via 2 pneumatic clamping cylinders.Length stop with scale and magnifying glass for frame or sash externaldimensions.Tool positions (longitudinal and transverse machining)contro ...
Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen.Video and pictures were taken before dismantling.Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diam ...
Working width: 3450 mmWorking height: 2000 mmNumber of cylinders: 5 St.loading dimensions L x W x H: 3600 x 1200 x 2720 mmHess Multipress Perforated Plate PressFor all sloped, segmental, and round-arch windows and doors.Also for interior work or frame construction.For gluing staircase block joints and much more.Largest working area approx. 3450 x 2000 mmExternal dimensions approx. 3600 x 1200 x 2720 mmThe vertical perforated plate press is constructed of heavy-duty, torsion-free steel.Thanks to its simple, robust, and economical design,it has a long service life.The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking.5 plug-in hand hydraulic cylinderson a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke4 fixed indiv ...
Angle system SCM Windows and doors manufacturing system Type MULTIFLEX C Year of construction 1992 Aggregates as follows Cross-cut saw motor power 3 kW Slotted spindle motor power 7.5 kW Profile spindle motor power 5.5 kW Profile spindle motor power 5.5 kW Glass bead saw motor power 2.2 kW Minimum workpiece width 35 mm, maximum workpiece width 140 mm Milling spindle diameter 50 mm Maximum clamping length 320 mm Feed speed 3-15 m/min. Feed motor 0.75 kW Spindle diameter glazing bead saw 25 mm Swivel control panel with electronic control Memory capacity of up to 100 programs The height adjustment of the journal and profile spindles is carried out by means of an electronic positioning device with 3 axes Automatic Rolling Table with 2 Speeds In a compact design With pull-out workpiece support With workpiece return No tools required Space requirement 3860 mm x ...
Various assembly tables for prefabricated houses in series Models 3.-meter X 6.meter to 9.meter Automatic installation of the house wall 12mx2.50m Total layout with 9 elements Viewing possible by appointment
SPECIFICATIONS: Chain operation Vertical Machining Voltage: 380 V
Tenoning spindle: 1 St.Number of milling agregates: 0 St.Spindle diameter: 40 mmSmall window production consisting of:W.--------------------------------------------------1) Haberkorn FZS1 slotting machine2) Okoma SF3F table milling machine3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 20114) Götzinger OBM Plus corner bearing and olive drilling machine,Maco MultiMatic fittings--------------------------------------------------Technical manufacturers description:- Haberkorn FZS1 slotting machine with automatic feed,-stepless height adjustment D 40 mmCutting-to-length saw:-Spindle arrangement: top-Three-phase motor: 3 kW-Spindle diameter: 30 mm-Speed: 2800 rpm-Saw blade diameter: 400 mm-Automatic brake with speed monitoring-Horizontal pneumatic positioning, manually adjustable-Protective and extra ...
Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30
Dimensions (L/W/H): 7600x1400x1800 mmWeight: 2950 kgTotal power requirement: 9,15 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3000x800x2100 mmWeight: 1250 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3960x1400x1800 mmWeight: 1200 kgtotal power requirement: 9,15 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x800x1350 mmWeight: 370 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
