윈도 생산 기계 사용 판매를 위해 (167)

Venjakob 제조 연도 1999 스프레이 건 4 수성 페인트 및 래커 및 UV 페인트 산 경화 페인트? - 지금은 불가능하지만 펌프, 튜브 및 노즐을 변경하면 페인트 재활용을 할 수 있습니다 - 예, "베팅"을 적용 할 수 있습니까? 물 기반? - 예, 물 기반 공작물은 라인에서 나온 직후에 쌓을 수 있습니까? (그들은 쌓일 수 있도록 건조합니까?) – 예, UV- 수성 페인트를 사용하지만 일반 수성 페인트 또는 래커 구성 요소를 사용할 때 선반에서 말려야하는 경우 어떤 유형의 제품을 라인에서 실행합니까? 어떤 재료? – MDF, 멜라민 표면 문, 구성 요소 등 및 단단한 목재 구성 요소 (주로 자작 나무) 공작물의 치수 제한은 무엇입니까? – 폭 최소 / 최대 20-1200 mm, 길이 최소 / 최대 350-2750 mm, 두께 최대 50 mm  ...

사피엔스가 있는 보스 머신(BMH) 나무 우리는 프레임, 창문 및 문 생산자이며 기계를 직접 판매합니다. 이 기계는 2006 년부터 2022 년까지 우리 공장에서 운영되고 있습니다 (16 년). 이것은 그 앞에 사피엔스가있는 보스 머신 (BMH)입니다. Sapiens는 하나의 로봇 헤드와 하나의 정규 축을 가진 CNC 기계입니다. 그런 다음 그는 테노닝 벤치로 진행합니다 (크로스 컷 처리를 위해). 첫 번째 샤프트는 톱 다음에 3 개의 수직 샤프트 (약 500mm 길이)가 있고 그 뒤에는 나무의 둥근 가장자리를위한 두 개의 모터가 더 있습니다. 그런 다음 그는 밀링으로 이동합니다. 첫 번째 커터는 모서리 마무리를 프로파일링하고 두 번째 커터는 내부 프로파일을 프로파일합니다. 첫 번째 밀링 커터는 목재 두� ...

상표: Eder & Müller 유형: KT 틸팅 테이블 건축 년도 : 묘사: 공압 스위블은 수평 위치에서 수직 위치로 회전합니다. 1500 - 2300 너비 및 1000 - 1600 높이에서 확장 가능한 지원 그리드. 홈이 있는 고무 패드(원래 아래 또는 폼 패드) 차원: 테이블 길이: 1500 - 2300 테이블 높이: 920 mm 테이블 폭: 1000 - 1600 무게: 90 KG

scM 멀티플렉스 윈도우 앵글 시스템을 판매하고 있습니다. 밀링 헤드 비발디 EU68mm. 절개 + 원뿔 스핀들 오른쪽 / 콘 측. 2 pcs. 프로파일 밀링 스핀들 + 유리 목록 절단 톱 왼쪽 / 롤 형성 측면 동일한 사용 가능.

전체 창 건설 프로파일 링 라인을 판매합니다. 1 개. 톱 Weinig Unimat 23EL와 함께 5 스핀들 네 측면 플래너 - 연삭기 HESS없이 - 약속에 의한 다른 교체 기계 2 탭 절단 및 슬롯 시스템 Weinig Unitec 10. 2 개. 프로파일 자동 변환기 센터 Weinig Univar 10. - 완전한 Weinig 자동화 피더 및 foerderer의 세트. - 중앙 컴퓨터없이 - 추가하고 프로그래밍해야합니다. 건설 연도 1997. 밀링 헤드 OERTLI. 동일하게 사용할 수 있습니다. 즉시 원래의 팔레트로 해체되었습니다. 함께 가격 만 48.000 유로. 조건 아주 좋은!

창 건설 키트를 판매하고 있습니다. 1 pcs. 원뿔 절단 및 슬롯 시스템 Weinig Unitec 10. 1 pcs. 프로필 자동 컨버터 센터 Weinig Univar 10. 1998년 건설 연도. 밀링 헤드 OERTLI. 동일한 사용 가능. 함께 가격 10,000 유로. 컨디션이 아주 좋습니다!

펜스터바우 콘 절단 및 슬롯 시스템 Weinig Unitec 10을 판매합니다. 1998년 건설 연도. 밀링 헤드 OERTLI. 동일한 사용 가능. 단가 5.500 유로. 3 PC. 사용할 수 있습니다. 컨디션이 아주 좋습니다!

펜스터바우 프로필 움팔츠오토마트 젠트럼 바이니그 유니바르 10을 판매합니다. 1998년 건설 연도. 밀링 헤드 OERTLI. 동일한 사용 가능. 단가 5.500 유로. 4 PC. 컨디션이 아주 좋습니다!

Tenoning spindle: 1 0Number of milling agregates: 2 St.Spindle diameter: 40,50 mmItem 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profilesFor sale on behalf of a customer-------------------------------------------------------Manufac turers Technical Description:Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine---------------------------------Compact, heavy-duty automatic window machine featuring a cast-iron construction,consisting of:Top-mounted cross-cut saw with 12-position turret stop system,Positive-guided saw guard for accident preventionTenoning spindle: 40 mm diameter x 252 mm length, 2-step stroke mechanism for3 tool positions (stroke height: 83 mm), Motor: 7.5 kWSliding t ...

Number of milling spindles: 2 St.fence: ja ja /neinworkpiece: ja STEGHERR Cross-bar Milling Machine, Type KSF-mini--------------------------------------------------Specialized milling machine for the efficient production of intersecting muntin bar joints.The KSF-mini muntin bar milling machine embodies STEGHERRs extensive experiencein manufacturing specialized milling equipment for intersecting muntin joints.The KSF-mini enables the rapid and precise production of allstandard intersecting muntin joints encountered in practice.Muntin bars that have already been profiled can also be processed on the KSF-mini.Precise milling is achieved because the workpiece is machined on three sidesin a single clamping operation.The tools are driven by two three-phase motors, workpiececlamping is pneumatic.The profile cutter is designed to match the web width. The saw bladesthat perform the lap-joint cut  ...

Approximately 3000 kilograms of dust/pellet processing capacity per day. HOU.948 Reinbold AZR 600 P Wood Shredder (invoice negotiable 2022) stands on a metal trestle which is included Extra auger deployed at 380V on the outlet of the shredder, including control box with control and motor protection Elevator belt towards the mill (380V) Hammer mill from 2015 (soft starter included) Dust lifter (blower)(380V) Bunker/Silo approximately 4 cubic meters with agitator, viewing windows and manual outlet Frequency converter Elevator auger \"RAKO\" (380V- adjustable auger) ZLSP420B Pellet Mill (380/50Hz) from 2021 (invoice negotiable 2021) Dust drum - runs via frequency converter - speed adjustable Elevator belt (380V) for discharge to, for example, a cubic bag where pellets are collected. Auction-ID: A1-47352-4

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of ...

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the  ...

Tenoning spindle: 2 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmweight: 5500 kgloading dimensions L x W x H: 7500 x 2500 x 2400 mm# 7020 Gubisch CW 3/8 with tooling-------------------------------------Sold on behalf of the customer from the customers location. Machine can be viewed in operationSummary of technical data(please inquire about any additional accessories included)-------------------------------------Cross-cut saw-------------------------------------Electronically controlled cross-cut sawNumber of tools: 1 pc.Spindle speed: 3000 rpmSpindle diameter: 30 mmMax. tool diameter: 350 mmMotor power: 3 kWLength stop-------------------------------------Electronic length stop2 Tenoning and slotting spindles:-------------------------------------Number of tools per spindle: 4/5 pcs.Spindle stroke: electronicSpindle speed: 3800 rpmSpindle diameter: 50 mmSpindle length: 320  ...

- Rotary drum debarker for wood logs. - Robust construction supported on wheels. - Evacuation of bark through longitudinal grooves in the drum. - Drum length approx. 17000 mm. - Drum diameter approx. 3100 mm. - Includes inclined loading hopper with drag belt. - The outbound conveyor belt is NOT included. - This machine has been stopped since 2018. At the time of the strike it was working properly. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48360-3

SAC P5 straight profiling unit with 3 shafts: SHAFT 1 H320mm - DIGITIZED Y/Z - HOURLY ROTATION 2 H320MM SHAFT - Y OUTPUT ON/OFF - DIGITIZED Z - CLOCKWISE/COUNTERCLOCKWISE ROTATION SHAFT 3 H320MM - Y OUTPUT ON/OFF - Z DIGITIZED - TIME ROTATION Vertical shaft/spindle stroke 275 mm Engine power kW 7.5 Shaft diameter 50 mm Tool base diameter 110-140 mm - Maximum tool diameter 240 mm 1 HP power motor drive device - Speed from 4 to 20 m/min 18 rollers - chain roller transmissions with pneumatic pressure adjustment Auction-ID: A1-47835-90

EQUIPMENT: TENONNAGE: CARRIAGE WITH AUTOMATIC WORKPIECE TURNING CUTSAW SHAFT 1 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD MULTI-FUNCTION ELECTRO-SPINDLE WITH 1 24-POSITION TOOL MAGAZINE SHAFT 2 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD PROFILING: VERTICAL SHAFT 1 PROFILING 620 MM VERTICAL SHAFT 2 PROFILING 620 MM TOP HORIZONTAL SHAFT 150MM LOWER HORIZONTAL SHAFT 150MM VERTICAL SHAFT 3 PROFILING 150 MM GLAZING BEAD SAW WITH EXTRACTOR MOVABLE GUIDE FOR LEAF CALIBRATION AUTOMATIC UNLOADING TABLE PARTS TO OPERATOR RETURN BELT ALL SHAFTS ARE Y/Z DIGITIZED DIMENSIONS OF THE WORKPIECE Maximum length (with stop reference).. mm 3200 Minimum length (inner tenon)... mm 200 Maximum height mm 130 Minimum height. mm 30 Maximum width. mm 200 Minimum width. mm 30 Speed, tenoning trolley... m/min 0-55 Profiling speed m/min 4-20 Roll forming table height mm 850 Roll forming machine tab ...

Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-47835-37

Auction-ID: A3-43557-17515

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles-----------------------------------------Machine available for inspection while still in operation until September 2026Summary of technical data(please inquire about any additional accessories included)Item 1: Cross-cut saw----------------------------> Electronic cross-cut saw, horizontally continuously adjustable> Number of tools: 1 unit> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3.0 kW> Laser alignment light for identifying the cut position> NC length stop mounted on the slotting table included,positioning of the cross-cut saw integrated into the control system. > Length 3500 mmItem 2: Tenoning and slotting spindle----------------------------> Number of tools: variable, infinitely adjustable ...

Tenoning spindle: 2 Stk.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set-----------------------------------------Optionally available (at an additional cost):IV 68 Wood, Wood/AluminumIV 78 Wood, Wood/AluminumIV 68 Entrance DoorsManufacturers Technical Description:-----------------------------------------Item 1: Weinig Unicontrol 10 NC Window System-----------------------------------------Cross-cut Saw--------------------------------------------------------------with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm,spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mmAxial adjustment: 150 mm via NC axisRadial adjustment: pneumatic, to 8 positions for top edge roundingHorizontal bottom rounding unit------------- ...

무게: 약 4,000 kg 제어: Sütron BT20 보링 스핀들 수: 4개의 St.WEINIG UNIVAR 10 자동 리베이트 유닛, UC-Matic 창문 시스템에서 제작, 기능 없음. - Suetron BT20 제어 장치 - 기계 미완성 - 요청 시 세부 정보 - 사진과 유사함. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.

Length: 5000 mmWidth: 100 mmHeight: 2800 mmYear: 2011 0Range+Heine coating systemfor coating individual wooden window components and framesfor sale on behalf of a client-----------------------------------------------------------Manuf acturer’s technical description:Part dimensions: Length: 5,000 mmHeight: 2,800 mmWidth: max. 100 mmCoating system:Intended use of material from the relevant coating manufacturer with alow solvent content (VOC value), water-based and non-flammable.Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift(without forced drying)Process (1 cycle is run twice):- Flooding- Drying- Checking and applying joint sealant- Spraying- Drying-------------- --------------------------Item 1 Conveyor technology1 Power + Free circular conveyorLayout as per drawing 11-138-010aEssentially comprising:3 drives with gear motors for the main chains withfrequency-contro ...

Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2500 mm# 6913 Hess Quickstep frame press---------------------------------Sold on behalf of the customer in its current conditionTechnical data summary(please enquire about any additional accessories included)--------------------------------------General---------------- -----------------------Working width: 3500 mmWorking height: 2500 mmFeatures:--------------------------------------> hydraulic: yes> Number of vertical press cylinders: 3> Number of horizontal press cylinders: 2> Vertical adjustment type: electric (long stroke cylinder)> Horizontal adjustment type: electric> 1 medium pressure barAccording to the customer,the control system has been renewed and the hydraulic pump with connections has been renewed(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of  ...

0: 3350 mmWorking height: bei 90° = 180 mm0: 45°/90°/45° 0Cutting height at 45°: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 315 mm0: 45°/90°/45° 0weight: 2050 kgCutting height at 45°: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 290 mm0: 45°/90°/45° 0weight: 1800 kgCutting height at 45°: 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

절단 폭: 90: 410 / 45:290 mm, 절단 높이: 170 mm, 절단 높이 45: 115 mm, 톱날 직경: 420 mm, 기계 중량 배: 150 kg, 톱날: 40 mm, 톱날, 회전 속도: 3350 U/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

절단 폭: 90: 410 / 45:290 mm, 절단 높이: 170 mm, 절단 높이 45: 115 mm, 톱날 직경: 420 mm, 기계 중량 배: 150 kg, 톱날: 40 mm, 톱날, 회전 속도: 3350 U/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.