used Window installations for sale

Description: SPECIFICATIONS Character: Deckel Maho Type: DMU 60 P hi-dyn Control: Heidenhain TNC 430 Year of construction: 2000 Panel diameter: ø630 mm X: 600 mm Y: 700 mm Z: 600 mm Top name spindle: SK 40 Maximum speed: 18,000 rpm Maximum table load: 600 kg Chip transport: Yes Transport dimensions: 3,500 x 2,800 x 2,700 mm Machine weight: 8,560 kg Number of controlled axes: 5 Positions in tool magazine: 60 Including Heidenhain TS 642 measuring probe: YesApprox. Onsite Dimension. (l x w x h): 3,500 x 2,800 x 2,700 mm, weight approx.: 8,560 kg

Number of spindles: 3 St.Number of tools: 2/3 St.Spindle diameter: 40/50 mm1 OKOMA folding machine model UF 2 EG-------------------------------------1. Energy data:- Operating voltage: 3 phases, 380 V, 50 Hz.- Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 66112. Profile spindle 1:- Spindle arrangement: right- Power 11 kW- Speed 7000 rpm- Direction of rotation: synchronous and counter rotation- Spindle diameter 40 mm- Usable length 252 mm- Tool diameter max. 230 mm- U-movement of the profile spindle- Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch- Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch- Automatic immersion: immersion speed can be regulated for tear-free Fold over- ...

Description: for the production of plastic windows and doors only saw, without measuring device  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,100 mm, weight approx.: 145 kg

Description: tool cabinet with tools and accessories: sunlight immitator jack stand vice servomotor brake fire & emergency apapratus Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 250 kg

Description: This machine is suitable for both standard windows and for special production, such as triangular and trapezoid windows. benefits: weld seam restriction 2 mm angle adjustment from 30° to 180° individual adjustment of welding  , parameters: parallel thrust procedure short retooling times  , max profile width: , 112 mm after angle 45 whipped after angle 60 whipped 133 mm 90 bevelled 167 mm 180 beaten 190 mm min height 30 mm maximum profile height 130 mm radial pressure: 7 bar  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,550 mm, weight approx.: 205 kg

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time!Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Tool clamping length: 25 mm> Spindle speed: 9,000 rpm> Tool diamete ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmControl: CNC, Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 450 ...

Tenoning spindle: 1 Stk.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus # 6826 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine can still be seen in use!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 3,000 - 6,000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool flig ...

Tenoning spindle: 1 0Number of milling agregates: 5 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus # 2732 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine is in checking process at the moment!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool fligh ...

Tenoning spindle: 1 Stk.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig PC-Nexus # 2745 Weinig Unicontrol 6 with NC spindles------------------------------------------------Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally bottom> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool flight circle max.: 130 mm> Adjustment path ax ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmcontrol: Südtron BT 20 Weinig Unciontrol 6---------------------------------General data---------------------------------Loading dimensions approx. 5000x2400x2400Machine weight approx. 3000 kgCrosscut saw---------------------------------> Crosscut saw pneumatic, against 8-way turret stop> Spindle speed: 2800> Spindle diameter: 40 mm> Tool diameter max.: 350 mm> Motor power: 3 kW> Laser aiming light for detecting the saw sectionLength stop - clocked---------------------------------> Length stop 2700 mm1. Tenon and slot spindle---------------------------------> Number of tools: 3/4 pcs.> Tool clamping length: 320 mm> Vertical pneumatic spindle stroke: 240 mm for wood thickness IV 68-92> Spindle speed: 3500 rpm> Spindle diameter: 50 mm> Max. tool diameter: 320 mm> Motor power: 11 kW1. Profiling spindle - synchro ...

Number of spindles: 4 St.Number of tools: 11 St.Spindle diameter: 50,40 mmSpindle length: 285,125 mmlength: 4000 mmwidth: 2000 mmheight: 2200 mmWeinig Univar 10/3 folding machine---------------------------------Machine will be cleaned and chcked before deliveryFor milling around windows, doors and the like with unevencircumferential profiles. Machine suitable for wood thickness 68 to 92 mmTime required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.The available tool positions are selected using a selector switch on the control panelretrieved.Machine with 3 hydraulically controlled right precisionLifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindleThe spindle stroke takes place in a U-movement, so that the opening is possible for short partsThe milling stop remains as small as possible. Spindle stroke horizontally fineAdjustable for both tool p ...

Number of boring spindles: 3 St.Number of tools: 1.3/4.1. St.Spindle diameter: 50,40 mmSpindle length: 120,320,125 mmweight: 2500 kgloading dimensions L x W x H: 3800x1400x2000 mmtable length: 3470 mmWeinig Univar 6 PIn order to sell----------------------Operating voltage: 380 volts, 50 periods.For milling around windows, doors and similar with uneven edgesProfiles.Arrangement of the aggregates:1. Synchronous spindle on the right, pneumatically clocked.2. Profiling spindle on the right3. Fitting spindleProfiling spindle suitable for holding several tools one on top of the other.Spindle movement pneumatic.The 1 spindle works in synchronization for tear-free milling. RespectivelyThis spindle plunges the last 100 mm of a frame end with theInsert the appropriate tool into the wood to prevent tearing at the frame cornersavoid.Machine stands, tables, stops:Machine body made of heavy, torsion-f ...