pencere üretim makineleri kullanılmış satılık (166)

Approximately 3000 kilograms of dust/pellet processing capacity per day. HOU.948 Reinbold AZR 600 P Wood Shredder (invoice negotiable 2022) stands on a metal trestle which is included Extra auger deployed at 380V on the outlet of the shredder, including control box with control and motor protection Elevator belt towards the mill (380V) Hammer mill from 2015 (soft starter included) Dust lifter (blower)(380V) Bunker/Silo approximately 4 cubic meters with agitator, viewing windows and manual outlet Frequency converter Elevator auger \"RAKO\" (380V- adjustable auger) ZLSP420B Pellet Mill (380/50Hz) from 2021 (invoice negotiable 2021) Dust drum - runs via frequency converter - speed adjustable Elevator belt (380V) for discharge to, for example, a cubic bag where pellets are collected. Auction-ID: A1-47352-4

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of ...

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the  ...

Tenoning spindle: 2 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmweight: 5500 kgloading dimensions L x W x H: 7500 x 2500 x 2400 mm# 7020 Gubisch CW 3/8 with tooling-------------------------------------Sold on behalf of the customer from the customers location. Machine can be viewed in operationSummary of technical data(please inquire about any additional accessories included)-------------------------------------Cross-cut saw-------------------------------------Electronically controlled cross-cut sawNumber of tools: 1 pc.Spindle speed: 3000 rpmSpindle diameter: 30 mmMax. tool diameter: 350 mmMotor power: 3 kWLength stop-------------------------------------Electronic length stop2 Tenoning and slotting spindles:-------------------------------------Number of tools per spindle: 4/5 pcs.Spindle stroke: electronicSpindle speed: 3800 rpmSpindle diameter: 50 mmSpindle length: 320  ...

- Rotary drum debarker for wood logs. - Robust construction supported on wheels. - Evacuation of bark through longitudinal grooves in the drum. - Drum length approx. 17000 mm. - Drum diameter approx. 3100 mm. - Includes inclined loading hopper with drag belt. - The outbound conveyor belt is NOT included. - This machine has been stopped since 2018. At the time of the strike it was working properly. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48360-3

SAC P5 straight profiling unit with 3 shafts: SHAFT 1 H320mm - DIGITIZED Y/Z - HOURLY ROTATION 2 H320MM SHAFT - Y OUTPUT ON/OFF - DIGITIZED Z - CLOCKWISE/COUNTERCLOCKWISE ROTATION SHAFT 3 H320MM - Y OUTPUT ON/OFF - Z DIGITIZED - TIME ROTATION Vertical shaft/spindle stroke 275 mm Engine power kW 7.5 Shaft diameter 50 mm Tool base diameter 110-140 mm - Maximum tool diameter 240 mm 1 HP power motor drive device - Speed from 4 to 20 m/min 18 rollers - chain roller transmissions with pneumatic pressure adjustment Auction-ID: A1-47835-90

EQUIPMENT: TENONNAGE: CARRIAGE WITH AUTOMATIC WORKPIECE TURNING CUTSAW SHAFT 1 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD MULTI-FUNCTION ELECTRO-SPINDLE WITH 1 24-POSITION TOOL MAGAZINE SHAFT 2 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD PROFILING: VERTICAL SHAFT 1 PROFILING 620 MM VERTICAL SHAFT 2 PROFILING 620 MM TOP HORIZONTAL SHAFT 150MM LOWER HORIZONTAL SHAFT 150MM VERTICAL SHAFT 3 PROFILING 150 MM GLAZING BEAD SAW WITH EXTRACTOR MOVABLE GUIDE FOR LEAF CALIBRATION AUTOMATIC UNLOADING TABLE PARTS TO OPERATOR RETURN BELT ALL SHAFTS ARE Y/Z DIGITIZED DIMENSIONS OF THE WORKPIECE Maximum length (with stop reference).. mm 3200 Minimum length (inner tenon)... mm 200 Maximum height mm 130 Minimum height. mm 30 Maximum width. mm 200 Minimum width. mm 30 Speed, tenoning trolley... m/min 0-55 Profiling speed m/min 4-20 Roll forming table height mm 850 Roll forming machine tab ...

Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-47835-37

Auction-ID: A3-43557-17515

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles-----------------------------------------Machine available for inspection while still in operation until September 2026Summary of technical data(please inquire about any additional accessories included)Item 1: Cross-cut saw----------------------------> Electronic cross-cut saw, horizontally continuously adjustable> Number of tools: 1 unit> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3.0 kW> Laser alignment light for identifying the cut position> NC length stop mounted on the slotting table included,positioning of the cross-cut saw integrated into the control system. > Length 3500 mmItem 2: Tenoning and slotting spindle----------------------------> Number of tools: variable, infinitely adjustable ...

Tenoning spindle: 2 Stk.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set-----------------------------------------Optionally available (at an additional cost):IV 68 Wood, Wood/AluminumIV 78 Wood, Wood/AluminumIV 68 Entrance DoorsManufacturers Technical Description:-----------------------------------------Item 1: Weinig Unicontrol 10 NC Window System-----------------------------------------Cross-cut Saw--------------------------------------------------------------with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm,spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mmAxial adjustment: 150 mm via NC axisRadial adjustment: pneumatic, to 8 positions for top edge roundingHorizontal bottom rounding unit------------- ...

Ağırlık: yaklaşık 4.000 kgkontrol: Sütron BT20 Delme millerinin sayısı: 4 St.WEINIG UNIVAR 10 otomatik indirim ünitesi, UC-Matic pencere sisteminden işlevsiz. - Suetron BT20 kontrol ünitesi- Makine eksik- Detaylar talep üzerine - Fotoğraf benzer. Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Length: 5000 mmWidth: 100 mmHeight: 2800 mmYear: 2011 0Range+Heine coating systemfor coating individual wooden window components and framesfor sale on behalf of a client-----------------------------------------------------------Manuf acturer’s technical description:Part dimensions: Length: 5,000 mmHeight: 2,800 mmWidth: max. 100 mmCoating system:Intended use of material from the relevant coating manufacturer with alow solvent content (VOC value), water-based and non-flammable.Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift(without forced drying)Process (1 cycle is run twice):- Flooding- Drying- Checking and applying joint sealant- Spraying- Drying-------------- --------------------------Item 1 Conveyor technology1 Power + Free circular conveyorLayout as per drawing 11-138-010aEssentially comprising:3 drives with gear motors for the main chains withfrequency-contro ...

Tenoning spindle: 0Number of milling agregates: St.Spindle diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2500 mm# 6913 Hess Quickstep frame press---------------------------------Sold on behalf of the customer in its current conditionTechnical data summary(please enquire about any additional accessories included)--------------------------------------General---------------- -----------------------Working width: 3500 mmWorking height: 2500 mmFeatures:--------------------------------------> hydraulic: yes> Number of vertical press cylinders: 3> Number of horizontal press cylinders: 2> Vertical adjustment type: electric (long stroke cylinder)> Horizontal adjustment type: electric> 1 medium pressure barAccording to the customer,the control system has been renewed and the hydraulic pump with connections has been renewed(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of  ...

0: 3350 mmWorking height: bei 90° = 180 mm0: 45°/90°/45° 0Cutting height at 45°: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 315 mm0: 45°/90°/45° 0weight: 2050 kgCutting height at 45°: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 355 - 4010 mmWorking height: bei 90° = 290 mm0: 45°/90°/45° 0weight: 1800 kgCutting height at 45°: 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

kesme genişliği: 90: 410 / 45:290 mmKesme yüksekliği: 170 mmKesme yüksekliği 45: 115 mmtestere bıçağı çapı: 420 mmMakine ağırlığı karbam: 150 kgTestere bıçağı: 40 mmtestere bıçağı dönüş hızı: 3350 U/dQBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

kesme genişliği: 90: 410 / 45:290 mmKesme yüksekliği: 170 mmKesme yüksekliği 45: 115 mmtestere bıçağı çapı: 420 mmMakine ağırlığı karbam: 150 kgTestere bıçağı: 40 mmtestere bıçağı dönüş hızı: 3350 U/dQBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Length: mmWidth: mmHeight: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 660x460x1200 mmWeight: 49 kgTotal power requirement: 0,85 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: ~ 45 - 95 mmWorking height from to: tba mm: 3.000 mmmilling height: 130 mmSemi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas.Including dismantling and loading. Fixed loading date: 15.06.2026.Consisting of:- Milling and gluing machine Sauter type RS-FPEL 130- Press Sauter type RS-DKPV 6- End length saw Sauter DAS 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja_yes Çalışma genişliği: - mm0: - 0Striffler kuşağı Montaj Masası--------------------------------------------------------- otomatik tornavida ve vida yemleyici ile - Montaj rafı - Roto fitingleri için delici (Üreticiye göre teknik özellikler, garanti olmadan!)Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Çalışma genişliği: yaklaşık 2.600 mmÇalışma yüksekliği: yaklaşık 1.450 mm Silindir sayısı: 6 St. Aşağı tutucu: 3 St. Stabil hidrolik delik presi, delik plaka presi veya yapıştırıcı presi, çerçeve, panel, pencere veya kapı gibi iş parçalarını yapıştırmak veya sabitlemek için. Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

cutting range min.: 250 - 2200 mmsaw blade diameter: 250 x 20 mmcutting range: 50 x 70 mmmitter cutting - all-position: 90 u 45 °total power requirement: 2 x 1,1 kWweight of the machine ca.: 0,42 tdimensions of the machine ca.: 2,94 x 1,15 x 1,22 mIncluding positioning controlIncluding electronic measuring rodWe connected the machine, but unfortunately couldnt operate it because we are unfamiliar with it.The hoses should be replaced because air is leaking from some of them.Feel free to come by and take a look in person.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mm# 6726 Weinig Unicontrol 12 CNC--------------------------------------------------------Sale on behalf of a customer. Machine connected and ready for demonstration.crosscut saw--------------------------------------------------------Crosscut saw electronically, horizontally infinitely adjustableNumber of tools: 1 pc.Spindle speed: 3000-6000 rpmSpindle diameter: 40mmTool diameter max.: 400 mmMotor power: 3 kWLaser guide light to identify the saw section rounding aggregate--------------------------------------------------------Posit ion: horizontally belowMotor power: 1 kWSpindle diameter: 20mmSpindle speed: 9000 rpmTool flight circle max.: 130 mmelectronic length stop, length: 3500 mm--------------------------------------------------------1. tenoning Spindle------------------------------------ ...

Working width: 4500 mmWorking height: 3000 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5500x1400x3550 mmWeight: 3000 kgS&S frame press Bavaria 2000 L, built 2026---------------------------------SHORT TIMED availabe exw warehouse Engelfried, 73447 OberkochenNEW for the Holz-Handwerk 2026 trade fair in Nuremberg:Now also with semi-automatic positioning of the verticalpress cylinders 1, 2, and 3 via enabling switch,including ON/OFF selector switch for beam 2With automatic pressing cycle + manual controlfor corner connections tenon+slots and dowel connection/mortised tenon,can be switched using a selector switch on the control cabinet.With basic equipment for optional use of counter profiles if the sash is rebated on the loose part.CE versionBasic machine in the strongest frame welded construction,with thick-walled special hollow profiles.Guideways of the pressure beams for the press cor ...

Number of motors: 2 Stück0: 3000 mmControl: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mmWeight: 800 kgHECHT Double Miter Saw Exenso DS350E - 3000 mm--------------------------------------For wooden glazing beads, mullions, profile strips, aluminum strips, etc.Item 1.1 Article number 942.51031 pc. HECHT Exenso DS350E- Working length 3000 mm- Swivel range 22.5° (inside) to 135° (outside)- Right head movable- Saw blade holder Ø 350 mm- Includes 1 pc. center support.- Pneumatic clamping of the components.- Exenso DS3 positioning control with 15 touch panel display in adustproof monitor housing.- 3-axis control, 1 longitudinal axis and 2 swivel axes.- Manual input of cutting data- Processing of data from a cutting list (data set according to specifications)- Processing of measuring rod data (GMF wireless caliper)- Ethernet connection 10/100 (TCP/IP)- USB interface- Includes c ...