Manufacturer:
(Category: 203)
planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron- The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position- Large precision aluminium dressing fence, slightly tiltable 90 - 45 °- The inclination of the stop is easily readable from the operator side- As standard with auxiliary stop for safe planing of even narrow workpieces- Large four-knife shaft, precision-mounted- Quiet running with precision aggregate and heavy cast iron execution- Powerfu ...
Code: 0411 Brand: CMC - ITALY Model: RP 400 Surface planer for planing wood materials, joinery, furniture, window and door frames, plastics, composite materials, and various - CE Standard Technical Specifications: Planing width 400 mm Table length 2500 mm Max depth of cut 10 mm N°4 knives Motor 4 Hp Fence tilting up to 45° Exhaust hood diameter 120 mm Overall dimensions mm 2520 x 800 x 1350 h Weight kg 450
Combined dressing and thickness planing machine from Hofmann with 4-knife Tersa shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary Planing width approx. 500mm Thickness table electrically adjustable with digital display Rubberized feed roller, new Rubberized pull-out roller, new Planing height approx. 4 - 245mm 2 feed speeds 7 + 14 m/min Table length 2400mm Drive motor 7.5kW with automatic motor brake and soft start device 4-knife shaft with new Tersa reversible knives slit table lips Planing Shaft Protection TX-GL Swivel stop with joining strip Hollow and pointed joint adjustment of dressing tables Rod for hanging the extraction hood Suction nozzle 2 x 160mm Emergency stop switch Original paint, only a few places re-dabbed ...
Code: 0408 Brand: CMC - ITALY Model: SP 630 - CE Standard Automatic thickness planer for joinery, furniture, custom-made furniture, wooden joinery, sawmills, timber carpentry, plastics and various - CE Standard Technical specifications: Working width 630 mm Max working height 300 mm Min working height 4 mm usefu thickness capacity 8 mm N° 4 knives Rotational speed 5000 rpm Feed speed 4–20 mt/min Working height display Motor power Hp 7,5 Table lifting motor power 0,5 Hp Feed motor power 0,75 Hp Suction inlet diameter 120 mm Overall dimensions mm 1200 x 1120 x 1150 h Weight kg 870
Key data: 625 mm, 245 mm, 5 kW
HOFMANN AD 635 YOC 2020 Motor power: 5.5 kW 4-knife shaft (TERSA) Feed: 2 speeds (7 + 14 m/min) Max. planing width thickness planer: 625 mm max. planing width dressing line: 610 mm Planing height: 4 - 245 mm Chip removal: Dressing: 4 mm Thickness planing: 8 mm Table length Feed table length: 1.25 m Pick-up table length: 1.25 m Thickness table: 1.00 m Mounting tables on the thickness table 2 x 100 cm electr. Table height adjustment with positioning control Steel Feed Roller Rubber pull-out roller CPS Knife Shaft Guard Integrated Aigner auxiliary stop Extraction connection: 2x 160 mm Engine brake Operating instructions 4 new knives Weight approx. 1,300 kg Machine Dimensions: 250 x 113.5 x 98.5 cm (LxWxH) Operating hours read: 478 h Manufacturer information
WACO - LECAB - WoodEye high speed planing-cutting-bundling line, Feed speed up to 200 m/min, - Lecab - Kallfass automatic de-stacking and infeed, - Waco Twin-resaw line, type BKW, - Lecab - Kallfass resaw outfeed and infeed planer, - Waco planer, type Maxi - 11 spindles, - WoodEye scanner system, - Lecab outfeed with bundling systems 1+2+3, - Outfeed 1 and 2 with integrated cross cut system, - Outfeed 1 - 3 with Fischer foil wrapping + Logopack labeling + automatic stacker, - Lecab outfeed system for wood packages, Full line in mint condition
Number of boring spindles: 7 St.Working width: 160 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: 2,2 kWWeinig PFA 17 N (Unimat) automatic planing and chamfering machine for four-sided planing and profiling of wood, equipped with a universal spindle.Spindle 1: Bottom / 35 mm / 4 kWSpindle 2: Right / 35 mm / 3 kWSpindle 3: Left / 35 mm / 5.5 kWSpindle 4: Right / 35 mm / 7.5 kWSpindle 5: Top / 35 mm / 5.5 kWSpindle 6: Bottom / 35 mm / 4 kWSpindle 7: Universal / 35 mm / 4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details.
- Spindle 1st dressing with table of 2500mm - Spindle 2. First right spindle - Spindle 3. First left spindle with 2nd axis control (dimension + height + setup) - Spindle 4. Second right spindle with 2nd axis control ( dimension + height ) - Spindle 5. Second Left Spindle with 3 Axis Control ( Dimension + Height + Setup ) - Spindle 6th upper spindle as thickness and profile spindle with 3rd axis control ( dimension + on/off + setup ) - Spindle 7. Lower spindle as cleaning spindle or profile spindle - Spindle 8. Second upper spindle as cleaning spindle or profile spindle - Spindle 9. Second lower spindle as plaster spindle or profile spindle Motors 9 x 7.5 KW 380 V. 50 H. Feed continuously variable 6-36 meters
PART NUMBER 7966 SPECIFICATIONS - max planing width 770mm - max planing height on both sides 200mm - Electric top/bottom adjustment - max planing height on four sides 180mm – in advance: - pulling input shaft, toothed - Flingers - pressure - 2 pulling shafts, geared (first sequential) - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft – from below: - guide strip - Slip roller, smooth, split - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling shafts – at the rear: - 2 side spindles + pressure 1) vertical right 180mm 5.5kW 2) Vertical left 180mm 5.5kW - spindle diameter 30mm - spindles adjustable up/down, right/left - manual setting of the planing width - 4 types of feed speed 6/9/12/18m/min - 2.4kW feed motor - Extraction port diameter 160mm, 180mm, 2x120mm - dimensions l/w/h 2600x1700x1650mm - weight ...
Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...
Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about ...
Key data: 10 , 240 mm
Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...
Key data: 630 mm, 2 mm, 5 kW
General Technical Features • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; Pushbutton for manual quick and fine adjustment of the planing thickness according to digital display, push button for knife shaft start and stop, integrated operating hour counter • Thickness table: Electr. Thickness table adjustment with fine adjustment, travel speed 10 mm/s, tilt-proof mounted on 4 supporting spindles, table surface finely planed • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for wood of different thicknesses, rubber rollers gentl ...
Key data: 500 mm
General Technical Features • Motor power: 5.5 kW (7.5 hp) • Pick-up table length: 1,200 mm • Planing width: 500 mm • Table height: 850 mm • Cutting depth: max. 8 mm • Speed: 5,000 rpm • Feed table length: 1,640 mm • Weight: approx. 1,200 - 1,250 kg • Operation: Electric cutting depth adjustment with display; Hollow pointed joint adjustment with display • Dressing stop: Tiltable up to 45° according to scale with one-handed operation and integrated auxiliary stop • Suction: Suction nozzle Ø 160 mm, minimum extraction air volume: 24 m³/min. at 20 m/s, vacuum 810 Pa • Feeder: Console for mounting a feeder • Electrical equipment: Electronic soft start brake device; Contact for control of the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; Required power supp ...
Number of boring spindles: 5 St.Working width: 230 mmWorking height: 120 mmUniversal planer and moulder Weinig Profimat 23 for four-sided planing and profiling of timber. Including saw package for ripping timber with the 4th and 5th spindle.Spindle 1: Bottom / 5.5 kW / 40 mmSpindle 2: Right / 5.5 kW / 40 mmSpindle 3: Left / shared motor with #2 / 40 mmSpindle 4: Top / 7.5 kW / 40 mmSpindle 5: Bottom / 4 kW / 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 6 working width: 230 mmplaning height: 160 mmControl: ATS Driven table rollers: 1 feed: 24 m/minfeed motor: 4 kWLength of the planing table: 2.500 mmWeinig Unimat 23 automatic planer and moulder for four-sided planing and profiling of timber with ATS system, reinforced Kaschwig shuttering protection cabin and universal spindle.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Spindle 1st dressing with table of 2500mm - Spindle 2. First right spindle - Spindle 3. First left spindle with 2nd axis control (dimension + height + setup) - Spindle 4. Second right spindle with 2nd axis control ( dimension + height ) - Spindle 5th upper spindle as thickness and profile spindle with 1st axis control ( dimension ) - Spindle 6. Lower spindle as plaster spindle or profile spindle - Spindle 7. Universal spindle as profile spindle or glazing strip saw Motors 7 x 7.5 KW 380v 50H. Feed infinitely variable 6-36 m Operating hours per month: average approx. 51 hours
This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.
Number of boring spindles: 8 St.Working width: 230 mmWorking height: 160 mmFeed motor: 5,5 kWFeed speed: 36 m/min.Control: Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11.The control panel was equipped with the current Simatic Panel PC677C-15 in 2021.The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement.Spindle 1: Bottom / HSK Powerlock / 12,000 rpmSpindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpmSpindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpmSpindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpmSpindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpmSpindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpmSpindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpmSpindle 8: Bottom / HSK Powerlock / 4,000 - 12,00 ...
Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...
Number of boring spindles: 6 St.Working width: 220 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: 5,5 kWFeed speed: 36 m/min.Grooved table: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.Dimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 Four-Sided Planer – Window Version(With glazing bead separation feature, or usable as a grooving spindle)ATS Control and Program Control-------------------------------------Technical Specifications Summary(Please inquire regarding any additional accessories that may be included)-------------------------------------General----------------- -------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Infeed table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5–24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight (approx.): 2500 kgSpindle Arrangement------------------------------------ ...
Number of spindles: 5 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2500 mmFeed motor: 1,1 kWFeed speed: stufenlos regelbar 2-12 m/min.weight of the machine ca.: 2500 kg1 WEINIG VARIOMAT Planing and Moulding Machine---------------------------------------Brief Summary:---------------------------------------- 5 spindles- Powerful motors- Cycle-controlled jointing- MemoryPlus control system- Option: Stähle-Hess Saturn single-piece sanding machineTechnical Manufacturers Description:---------------------------------------Working width: 20 – 230 mmWorking height: 8 – 120 mm1st Spindle: Horizontal Bottom---------------------------------------Motor with brake: 7.5 kWDiameter: 40 mmSpeed: 6000 rpmTool cutting circle: 125 – 145 mmAxial adjustment range: 5 mmRebating device incl. rebating cutters2nd Spindle: Vertical Right-------------------------------- ...
Code: 0388 Brand: SAC Model: FS 530 Surface planer with ‘Tersa’ knives for joinery, furniture, custom-made furniture, wooden joinery, doors, timber framing, sawmills, plastics and various Features: Rigid steel base Ground and balanced steel spindle Low noise level Tilting fence from 0° to 45° Feed indicator Shaft with ‘Tersa’ knives Technical data: Working width 530 mm Total table length 2890 mm Table height 800 mm N° 4 knives Max pass 20 mm Motor 4 Hp Tilting guide – dimensions 120 x 160 mm Overall dimensions mm 2890 x 900 x 96o h Weight kg 800
Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price
Key data: 530 mm, 300 mm, 4 kW
Table length 800mm Feed speed 5/8/12.5/19.5 m/min 4-strip planer blade shaft Ø110mm 3 upper feed rollers 1 table feed roller Speed planing shaft 5000 rpm electr. Table height adjustment with electr. Advertising Extraction hood Ø150mm Dimensions LxWxH=1070x880x1150mm Wt. approx. 700kg The machine is in use. Changes to technical data, typesetting and printing errors as well as errors are reserved at any time!
Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 500 with grooved table----------------------------------The machine arrives at the warehouse and is cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- 8,000 rpm- Grooved table for short or difficult-to-guide workpieces, coatedwith Marathon PowerCoating- One driven roller in the outfeed table, hardened: 210 mm wide- Left and top spindles controlled for width and height- Quick-release spindle nutDetailed Description:---------------------------------------------------------- -------------Technical Data:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 51st Spindle - bottom----------------------------------------------- Motor with brake: 7.5 kWSpindle dia ...
