subcategories
(3rd category level)
Manufacturer:
(Category: 703)
TREIF Falcon Hybrid Portion Cutter – 2012, For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system., The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery., The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision., Key Features, - Year: 2012, - Complete system including infeed weigher and checkweigher with automatic reject, - Recently serviced, - Excellent working condition, - Immediately available, Typical Specifications, - Maximum cutting capacity: up to 550 cuts per minute, - Maximum product cross section: approx. 26 ...
VAKONA energy-saving cooling tumbler ESK 850 STL-B Year of Make: 2017 Equipment: – Container, machine cabinet and frame made entirely of stainless steel – Machine fixed – Touch screen control for operation in manual and automatic operation – Storage space for up to 99 recipes with freely programmable parameters: total, working and break time, rotation speed, Temperature, vacuum height, ventilation intervals, container position and container swivel operation – Rotational speed of the arm infinitely variable from 3-18 rpm – Direct cooling system with powerful cooling unit, heat exchanger in double-jacketed tank made entirely of stainless steel – Vacuum system including high-performance vacuum pump, fully automatic, programmable ventilation cycles, – sterile filters for disinfection of ventilation air, hygienic automatic water separator – electric infinitely ...
Belt width: 260 mm, Description: Including add-on tenderiser of 104 knives, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg
Treif Dicer Type Felix 100 With cutting set 24x24 mm Year of construction 2009 Other cutting set sizes on request
This Sterile Milk Tank has a Capacity of 16,700 Litres, it does not include the valve cluster and PLC program. There are a few valves available with the tank but these would need to be reconnected to a valve cluster program. This tank was connected to a central control room . The condition is good and there has not been any damages . Aseptic tanks are used for the process of Milk, Juice and other liquids required aseptic pasteurisation prior to the filling machines., The APV Aseptic Tank is a type of equipment designed for the storage and processing of liquids, particularly in industries such as food and beverage, pharmaceuticals, and biotechnology. Here are some key features of the APV Aseptic Tank:, - Sterile Environment: The APV aseptic tank maintains an environment that is free from contaminants, crucial for the integrity and safety of the stored product., - Construction Material: Ty ...
The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...
1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,
FUX band universal washing system FUX 1-SAF-1 with steam heating – powerful conveyor dishwasher for baking sheets, Technical specifications, - Heating type: Steam 8.5 bar, - Operating voltage: 400 V / 50 Hz / 3 phases, - Direction of rotation: right / left, - Throughput width: 612 mm, - Throughput height: 440 mm, - Waschgut: Sheets up to 650 x 600 mm, - Performance: about 75 sheets/hour, ---------------------------------------------------------------, Equipment / Zone layout, Feed zone, - Inlet No. 1 with hood, 350 mm, Pre-wash zone, - Pre-wash tank S”, FTX tank, 900 mm, - 4 kW pump, - Side washing arm, Main washing zone, - Main wash tank A”, 1,400 mm, - Tell-Druckwaschsystem, - 2 x 2.3 kW pumps, - Tank heater HDD via injector, Clear rinse zone, - Fresh water clarification rinse zone F, 600 mm, outlet, - Outlet No. 1, 1,100 mm, Instantaneous heater, - With condensate guidance in A- ...
Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg
Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.
Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.
The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...
High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP ...
End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: No, Total length: 1,800mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Mains connection: 230 VAC, 50Hz, Documentation: 1 x German paper
Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72 ...
used for frozen and fresh fish, sorting section with 12 pushers, Capacity: 120 weighings / min. Size of the sorting stations: approx. 400/300/250 mm (LxWxH), Weighing unit consisting of infeed, weighing belt and transport: 300/400/300 x 200 mm, with 12 ejectors installed in a row (stainless steel - compressed air cylinder FESTO).
Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm
Useful length: approx. 1,000 mm, usable width: approx. 200 mm, sturdy stainless steel frame, mobile design, total dimensions (LxWxH): approx. 1,050 x 620 x 1,080 mm, new motor, new belt, belt speed: approx. 30 m/s. Length: approx. 1,100 mm, width: approx. 800 mm, height: approx. 1,100 mm = 08.06.20 dh
Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it
We are selling here a dishwasher from the manufacturer KBS, type 3505 AP in a very good used and functional condition. Runs on 400 volts, 7.9 kW, built in 2019, with base, 2 baskets, rinse aid and detergent feeder, lye pump and booster pump, workshop tested, immediately ready for use, dimensions W/D/H 60/60/83 cm, others on request.
We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.
We are selling here a curing injector from the manufacturer Rühle, type PR 15 in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, built in 2011, completely stainless steel, 15 needles, incl. hand sprayer, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/115/140 cm, others on request.
We are selling here an ice cream machine from the manufacturer KBS / Migel, type KF200, mod. KF200A in a very good used and functional condition. The machine runs on 230 volts, 800 W, completely stainless steel, flake ice maker, 120 kg/24h, large bunker, workshop checked, immediately ready for use, dimensions W/D/H 56/87/156 cm, others on request.
Industrial Maurer smoking chamber made of stainless steel, designed for thermal processing and smoking of meat products such as sausages, bacon, and ham. The chamber is equipped with a digital control panel used to manage temperature and processing time. The door is large and insulated to maintain a stable temperature during operation. An emergency stop button is also located on the front of the machine for safety. The interior of the chamber is also made of stainless steel and is designed to ensure even distribution of heat and smoke during the smoking process. Inside the chamber there is an air circulation system as well as a unit for generating smoke from sawdust or wood chips. The machine is of industrial construction and is used in the production of smoked meat products. Technical specifications: 1 trolley digital control panel insulated door emergency stop button ...
Fessmann smokehouse with capacity for one trolley, designed for professional meat processing and smoking applications. It features electric heating with a power of 17 kW and an integrated smoke generator mounted in the smokehouse door, ensuring even smoke distribution and stable processing conditions. Its compact construction and practical dimensions make it suitable for butcher shops, meat processing facilities, and small production plants. 1 trolley Heating: electric, 17kW Installation dimensions: Base width:112 cm Base depth: 110 cm Height total: 235cm Corpus height (without el.motor height and pipes): 187cm Smoke-generator – built in door
DEMONSTRATOR Meat grinder Perfect for grinding meat, fish, vegetables and other products. Capacity about 150kg/h. This meat and vegetable grinder is made entirely of stainless steel. Due to the off-centre position of the feed neck, this grinder has excellent pull-in capacity, even of goods that have already been processed. The grinder housing can be completely removed from the engine by means of a quick-bolting system with embossed cables, and the stainless steel screw is guided in a special plastic bearing. The branded gear gear motor built into the high-base unit guarantees high performance even during continuous operation. The machine is equipped with 1 forward gear and impulse stage for reverse running. Smooth inner surfaces in the grinder housing noticeably reduce the frictional resistance for the meat, characteristic of which is the low meat residue in the cutting set. The m ...
Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Lenght: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200
The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...
Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives
