subcategories
(3rd category level)
Manufacturer:
(Category: 703)
SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.
PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...
GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm
BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm
CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz
VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg
DOUBLE SHAFT PADDLE MIXER, NAWI (1200 LT) Technical description: Capacity: 1.200 lt Power supply: 380-440 V / 50-60Hz Bowl dimensions: 1160 x 1230 x 900 mm Dimensions: 2400 x 1650 x 2350 mm
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available
FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm
RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)
BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm
FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm
FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm
FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm
FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm
Automatic mixer grinder Seydelmann MD 114, Machine completely in stainless steel, with various knives and discs, Year of construction 2000, connection 400V, 10kW, Dimensions LxWxH approx. 110x90x127cm, weight approx. 530kg, very good used condition, runs perfectly and smoothly
Speckschneider Treif Derby 100S-CE , Typ 2740, Würfelschneider, with a pair of gates for sausage salad 4x42mm, 4-bladed knife for cutting vegetables, instruction manual, Connection 400V, built in 1999, Dimensions LxWxH approx. 137x80x117cm, weight approx. 325kg, good used condition, fully functional
Tumbler Vakona VM 140 IP, vacuum tumbler, with new vacuum pump and new hoses, with mixing and pile arm, new scraper on mixing arm, Connection 400V, built in 1994, Dimensions LxWxH approx. 120x70x145cm, weight approx. 150kg good used condition, fully functional
Retus PSM 24/48 brine injector, injector with 24 double needles, Drive and pump can be switched separately, 2 belt speeds, Connection 400V, dimensions LxWxH approx. 187x70x185cm, weight approx. 290kg, Year of manufacture 2018, very good used condition, fully functional, Swiss make
Rühle SR3 cube and strip cutter (built in 2013), The Rühle SR3 is a fully automatic high-performance cube and strip cutter for industrial use in food processing. The machine stands out with precise cut quality, high throughput, and maximum flexibility for a wide range of products., Whether meat, bacon, cheese, fruit or vegetables – the SR3 processes almost all common raw materials reliably and evenly into cubes, strips or slices., Due to automatic loading, modern control technology, and quick-change system for cutting gates, the machine is ideal for use in production lines with high requirements for efficiency and product quality., Highlights, - Fully automatic high-performance machine, - Universally usable (meat, cheese, vegetables, fruit), - Precise cut images with minimal fracture proportion, - Quick-change system for cutting fences, - Touch control for simple operation, - Mobile ...
Main features, - Rugged industrial meat grinder, - Designed for high production performance, - Large filling basin with safety cover, - Powerful worm drive, - Including worm, cutting insert, and hole discs, - Established German quality, ---------------------------------------------------------------, ⚙ Technical data, - Type: AWE 130, - Power: approx. 11 kW, - Connection: 400 V / 3 Ph / 50 Hz, - Hole disc diameter: 130 mm, - Current consumption: approx. 21,5 A, - Power: up to about 1,500 – 3,000 kg/h (depends on the product), ---------------------------------------------------------------, Areas of application, Ideal for:, - Meat processing plants, - Butcher shops, - Convenience production, Suitable for fresh as well as lightly frozen meat., Dimensions / weight: L x B x H: 1,200 x 1,000 x 1,450 mm
Used Handtmann twisting and unscrewing line type PVLH 228 Plus. Line for sausages in natural intestines, collagen and artificial casings. • PLUS NEWS AND OPTIONS: Natural bowel pusher, minimal setup time, easy operation and much more... • STEP-BY-STEP PROCESS: portioning – twisting – twisting with butterflies – Equal portion length – hanging • TOP QUALITY PRODUCT thanks to gentle twisting with butterflies and a twisting unit • LARGE VARIETY OF PRODUCTS thanks to a wide range of applications and calibers and different stations butterflies spinning • FLEXIBILITY due to a variety of suspension module options: grouping, number of loops and distances between hooks, empty or full portions • HIGH PERFORMANCE thanks to rotating twin-funnel head • COST-EFFECTIVE by changing the cover in less than 2 seconds • SIGNIFICANT COST REDUCTION due to the highest w ...
Used meat flattener Demonstration system - Conveyor width: 600 mm - Quick belt change for hygienic cleaning ---------------------------------------------------- Used Meat flattener Presentation machine - Conveyor width: 600 mm - Quick belt change for hygienic cleaning
Vacuum filling machine, vacuum filler, sausage filling machine, dividing and twisting device -Handover: in its current condition as inspected -Process: Filling-Portioning-Twisting-Hanging -Program control: -Turning gear: -Turning nozzle: Ø 10 x 400 mm -Dimensions: 3400/1000/H1500 mm -Weight: 860 kg
Knife disinfection machine, knife disinfection device-GENO: dishwasher 1988-Metal case with: accessories see photo-Dimensions: 510/410/H210 mm-Weight: 19.5 kg
Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg
Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, cutter knife, cutter knife -Manufacturer: Knecht, cutter knives 4 pieces -Type: 05 R318 5 220 -Price/Delivery: complete -Dimensions: 320/300/H100 mm -Weight: 5.4 kg
Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 1 set / 3 pieces -Type: R320.5-09971 -Quantity: 2 sets of 3 available -Price: per set -Dimensions: 330/300/H70 mm -Total weight: 4.7 kg
