subcategories
(3rd category level)
Manufacturer:
(Category: 703)
HANDTMANN VF-616 + AL-216
Metalbud Nowicki’s KN-200 cutter is ideal for producing all types of meat stuffing. Ideally suited for medium-sized companies. The cutter can be used for production in the candy, vegetable or fish industry. Its advantages are especially: stainless steel construction grinding the stuffing in the whole bowl high productivity reliability regulation of cutting speed product temperature measurement lubrication system easy loading and unloading option of mixing and grinding stuffing programming of more than 40 technological programs hydraulic loading Specification : Type : KN-200 Bowl capacity : 200l Cutting speed (rpm): 200÷4800 Mixing speed (rpm) : (-100)÷(-300) Dimensions: L: 2820 mm x W: 2550 mm H: 2080mm Weight : 3600 kg
Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment
We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.
Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW
Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180
Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.
Ice-generator Ice production: approx. 700 kg in 24h Power supply: 400 V, 50 Hz, 3 phase, 16 A Control voltage: 24 V Power consumption: 2,1 kW Refrigerant: R 404 A Dimensions: Width 1000 mm Depth 800 mm Height 1100 mm
Ice-generator Ice production: approx. 500 kg in 24h Power consumption: 2,05 kW , 4,78 A Water connections: 3/4-inch screw thread Condensing unit: air-cooled Refrigerant: R 449 A Dimensions and weights: Width: 776 mm Depth: 685 (730) mm Height: 895 (1630) mm Weight: 180 kg
Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz
Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0
Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg
Mixer-grinder 130 mm Type: Seydelmann ME 130 Hole plate diameter: 130 mm 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, Hopper capacity approx. 170 litres (mixing capacity approx. 100 kg) Machine width: 90,0 cm Machine depth: 117,0 cm Machine height: 140,0 cm Power of motor: 18,0 kW Voltage: 400 V, 50 Hz Machine weight: 680 kg
Mixer-grinder 130 mm Type: Seydelmann ME 130 Completely made of special stainless steel Hole plate diameter: 130 mm Hopper capacity: about 170 l Throughput depending on material type, speed, cutting set up to 3000 kg/h One-speed mixing mechanism 2-speed working worm Machine dimensions in cm: Width: 90,0 Depth: 120,0 Height: 136,0 Installed power: 18 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg
Mixer-grinder 200 mm 200 mm hole plate diameter Almost completely made of solid stainless steel 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, with automatic drive Hopper capacity approx. 300 litres (mixing capacity approx. 150 kg) Integrated lifting device, for standard meat bins Machine dimensions in cm: Width: 265,0 Depth: 175,0 Height: 190,0 Power of the motor: 37,0 kW Installed power: 40,0 kW Voltage: 380 V, 50 Hz Machine weight: approx. 1200 kg
Mixer-grinder 130 mm Completely made of special stainless steel Holeplate diameter: 130 mm Hopper volume approx. 150 liters Mixing shaft with paddles Machine dimensions in mm: Width: 900 Depth: 1 380 Height: 1 350 Installed power: 8,6 kW Voltage: 400 V, 50 Hz
Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg
new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Perfectly suitable for dry products, such as: spices, ingredients, powders, granulates, nuts, grains, seeds, kernels, dried fruit, Granola, ..
all stainless steel electrically heated 386 kW frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm
Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available
Ecopack 650 is a semi-automatic machine specialized in LDPE shrink wrapping. These machines are extremely versatile and easy to operate. A simple and inexpensive way to pack a variety of products (bottles, vases, jars, boxes) The film is applied from one roll (located at the bottom of the machine). The worker manually wraps the product and cuts off the foil with a resistive wire (impulse sealing). After cutting the foil, the product moves to the tunnel where the shrinkage of the foil takes place. Machine dimensions: 1900 x 1100 x H 1700mm Entrance: 680 x 440mm Tunnel length: 1150mm max. product dimensions: 350 x 350mm Weight: 250kg Sealing width: 650mm Efficiency: up to 8 cycles/min
The Townsend 9000 is a feature packed derinder that is safe, reliable and precise suitable for medium and small production plants, butcher shops etc. Equipped with a belt with width of 510 mm. This high quality derinder yields the efficiency and stability required by customers. Whole construction made of stainless steel wich ensures the highest quality and ease of maintenance. Total dimensions: L:2150 x W:950 x H:2000mm Inlet: width 510cm x height 120 mm. Working width: 510 mm, Throughput: 1600-1800 pieces/hr of pork bellies and flat backs Output: 1300 – 3200 kg/hr
Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley
REF-1059 CRM NEXUS 220 CHOP CUTTER Manufacturer: C.R.M. Model: NEXUS 220 Year: 2003 All stainless steel Power: 4 kW Voltage: 400 V / 3-phase Mobile on casters Max. product dimensions: length 100 cm, with 22.5 cm, height 27 cm Overall dimensions: length 221 cm, width 85 cm, height 136 cm
Product number: 2530J Type: FGM48-288T Serial number: 9020-2009R Year: 2009 Belt width: 420 mm,, walking beam Needles: 2 x 144 knives Product height: max 240 mm Power: 3 x 400V, 50Hz, 8A Dimensions: 2300 x 750 x 2300 mm
2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power
loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017
Completely made of special stainless steel 50-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow The main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine Machine dimensions in cm: width: 130 depth: 100 height: 120 Main motor power: 13 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment
KALTEKS
