Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, tidy and smooth running Timer switches off the machine after the set time has elapsed very good condition, should still be thoroughly cleaned before use Video about test run and further pictures available
Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available
Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm
new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Perfectly suitable for dry products, such as: spices, ingredients, powders, granulates, nuts, grains, seeds, kernels, dried fruit, Granola, ..
Tumbler IGLU 250 in good used and functional condition. Completely made of stainless steel, 250 litre drum, vacuum, rollable, analog control. Dimensions W/D/H 95/150/180 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.
Product number: 1997WB Type: UniMix I 2000 Serial number: 1000 Year of construction: 2011 Capacity: 1600 L Power: 3 x 400V, 50Hz, 15kW Dimensions: 2700 x 1900 x 3100 mm Weight: 1900 kg CFS Multitrack meat analyzing system Type: S-1000 CFS Lifter for 200L eurobins Type: ColumnLoader 300S Serial number: 5000064751 Year of construction: 2006 Dimensions: 1500 x 1400 x 3800 mm Weight: 350 kg
Product number: 2414J Type: UNIMIX I V 3500 Serial number: 5000065442 Year of construction: 2007 Mixer: 3500 litre double paddle mixer Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 41kW Dimensions: 3650 x 2100 x 4300 mm With (N²) nitrogen injection. Mixer on weighing cells
Fomaco FBM 1000 Brine mixer Condition: Excellent Designed as additional and essential tool for Fomaco brine injectors to mix ingredients. With this brine mixer the process of mixing ingredients is very smooth, quick with spectacular results at output. Mixer automatically fills the tank with water to the desired level, and operator only got to do is add the dry ingredients into hopper. Brine mixing capacity: 1000 liters Tank volume: 40 liters Voltage: 3 x 400 V \ 50 Hz Dimensions (LxWxH): 2215 x 1940 x 2235 mm.
Product number: 2412J Type: ColdSteam M 5000 Serial number: 1005 Year of construction: 2013 Capacity: 5000 litres Model: double shaft paddle mixer Weighing cells: Vishay Nobel 50 kN Power: 3 x 400V, 50Hz, 45kW Dimensions: 5600 x 3850 x 2650 mm Weight: 3100 kg With steam injection and vacuum Including GEA inspection platform
loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017
Product number: 2365 Type: VAS150 Serial number: 2342 Year of construction: 2000 Bowl: 150 litres Knifes: U-shape chopper Power: 3 x 400V, 50Hz, 15.8kW Dimensions: 1400 x 1650 x 2000 mm Tiltable bowl
HOBART 4356-A MIXER SOME PARTS MISSING SOLD AS SEEN
Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment
Product number: 1936 Type: 750 Serial number: 13909 Year of construction: 2005 Mixer: double shaft paddle mixer Capacity: 2000 liter, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Outfeed height: 800 mm Vacuumpump: liquid ring SIHI LEMB 161 Water: 800 liter/hr Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg
Product number: 1775PG Type: 750 Serial number: 14350 Year of construction: 2009 Mixer: 1600 liter, double shaft paddle mixer Capacity: max 850 kg Mixing speed: 34 RPM at 50Hz Infeed height: 1960 mm Outfeed height: 740 mm Air pressure: 6 Bar, 17 nL Power: 3 x 400V, 50Hz, 16kW Dimensions: 3400 x 1900 x 2550 mm Weight: 1800 kg Karl Schnell platform Dimensions: 1400 x 640 mm Standing height: 1050 mm Nimo KG lifter Type: SK800MK2 Serial number: 11674 Year of construction: 2013 Max load: 800 kg Lifting height: 2600 mm Power: 3 x 400V, 50Hz, 3.55A Dimensions: 2000 x 2000 x 4550 mm
Karl Schnell single shaft paddle/spiral mixer Capacity: 3000 L
Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment
We sell here a paddle mixer from the manufacturer Laska, type ME 800 in a good used and functional condition. The machine runs on 400 volts, completely stainless steel, with mast feed for 200 liter cutter wagons, capacity 500 kg, newly stored, workshop tested, immediately ready for use, dimensions W/D/H 130/180/200 cm, more on request.
Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...
Product number: 2433 Type: ME400ZN1 Serial number: D7676 Mixer: 400 litre Z-arm mixer Power: 3 x 380V, 50Hz, 9kW Dimensions: 1250 x 2800 x 2650 mm With lifter for 200L tote bins
All stainless steal Hooper capacity 1200 liter Integrated vacuum pump Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open Loading unit for 200-liter trolley 99 programs The setting of working time Delay start Electric power: 8 KW Installation dimensions of the machine in cm : Width: 160 Length:210 Height: 230
Type 40 Lutetia vacuum baratte for meat Meat + brine capacity: 2000kg – 2200 kg Overall dimensions (L x W x H): 3250 x 1550 x 1990 mm Weight: 1500 kg Volume: 3675 L Diameter: 1440 mm
Machine details New Machines 4 Food Tumbler Mixer Model Uniball 225 Mixer Tumbler All stainless steel construction Capacity 225 litres, load capacity 60 kg to 100 Kg With inner blades to assist product roll Variable speed from 12 rpm to 24 rpm Motor gearbox drive 1.1 Kw Electric tipping discharge by motor gearbox Motor gearbox drive 0.12 kw Electric 400 volts 50 Hz Electrical controls mounted in IP 65 stainless steel control box Rigid construction to withstand movement Mounted on stainless steel wheels Discharge height to suit a standard 200 litre tote bin Overall length 1.6 metres Overall width 1.25 metres Overall height 2.0 metres Suitable for all type of products 12 months warranty
Mixer MBK Volume: 250L Dimensions: 1400 x 900 x 1300 mm Inside diameter: 800 mm Inner height dres: 500 mm Constructed of stainless steel One run Cover with the so-called plexiglass Stock status: 1 piece Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Main features : -Model: PM; -Floor model; -AISI 18/10 stainless steel construction; -With transmission system in operation (gear transmission); -2 separate motors; -Automatic feeding with 90 l. bunker; -Stirring paddles with automatic reverse; -"Unger" system - 5 instruments; Technical data : -Dimensions L / W / H: 770 / 1145 / 1325 mm.; Productivity: 1050 kg./hour; Grinding motor power: 4 kW; Stirring motor power – 0.75kW; Neck: 98 mm.; Weight: 400 kg.; The price includes a complete set of grinding tools - 2 knives, kidney, grid 3mm., 4mm., 6mm., 7.8mm., 10mm;
Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz
Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0
ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW
Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg
Warranty, delivery, installation, samples and training included in the price.
Mixer 250 liters double shaft with paddles - brand new! The machine has 2 motor-reducers reverse ×1.1 kw or a total power of 2.2 kw. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with paddles; 2 new front unloading flaps; Easy cleaning of the machine; Built-in two silent motor-reducers of the highest class; Safety cover with limit switch; Built-in electric part with moisture-proof buttons; Reversible mixing system in both directions; Capacity: 250 l.; Installation power 2.2KW, 400V, 50Hz;
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class . A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Dimensions ...
Main characteristics: - Intended for homogeneous mixing of food products; – Made entirely of stainless steel; – Completely silent mixing process; – Two working augers with paddles; – Easy emptying of the mixture by means of a valve in the lower part; – Easy cleaning of the machine; – Built-in two silent motor-reducers of the highest class; – Safety cover with limit switch; – Built-in electric part with moisture-proof buttons; – Reversible mixing system in both directions; – Ability to mount a lifting device (option); Model MMC 400 Capacity in l. 400 Maximum capacity in kg. 300 RPM 30 Gear ratio of the reducer ...
Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power 1100 W mono 1472 W trif El. power supply 230-400V/50Hz Dimensions of the vessel mm 300×390 Capacity kg/l 30/42 A 680 mm. B 365 mm. C 1120 mm. D 530 mm E 975 mm F 150 mm G 650 mm L 440 mm M 940 mm N 610 mm O 1010 mm Weight: kg 49 Package sizes: mm 720x570x770 Weight: kg 59
Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power Mn 1100 W Tf 1472W Electrical connection 230-400V/50Hz Dimensions of the vessel mm 410×480 Capacity kg./ l. 50/88 A 750 mm B 465 mm C ...
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. . The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Model ...
NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph
Vacuum meat mixer Palmia BE 2000-7 VAC Manufacturer Sweden Overhauled Technical data overall dimensions 3000x1400x2300/3400 mm; capacity 2000 ltr; vacuum single shaft mixer; mixing speed 6-13 rpm; power supply 400 V; 50 Hz; power 11 kW; vacuum pump 40 m3/h.
This machine mixes all kinds of meat products, canned goods and other mixable products. The RS 450 combines the advantage of the intersected blade mixing system with the automatic frontal unloading allowing the product to be taken directly into the trolleys, the emulsifier, a transfer pump or a screw conveyor. The mixer is equipped with a 10-program microprocessor for the rapid automation of the different types of mixing necessary for the customer. The capacity of the tank is 450 liters. Possibility of integrating a vertical loader for automatic loading of mixing trolleys. It is also indicated for mixtures of small quantities. TECHNICAL: - Tank capacity: 450 Liters. - Power: 4 kW. - Variable speed blades. - Sub-vacuum system and CO2 injection on request.
Product number: 2504 Type: RS450 Serial number: I194008 Mixer: 450 litre double paddle mixer Power: 3 x 380V, 50Hz, 4kW Dimensions: 2100 x 900 x 750 mm Weight: 510 kg
Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.
Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading
Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.
Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.
Rühle Tumbler MKR 600, Rühle high-tech polishing machine with vacuum, mixing arm, container size 600 liters, touch PC control, mixing and kneading, stepless arm drive allows up to 25 revolutions per minute, direct cooling by powerful cooling unit, Bayonet arm closure, integrated loading for 200 litres of standard trolley. The machine is available at short notice and can be tested in Koblenz, Rhineland-Palatinate.
Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.
Height 1950 Width 1670 mm Length 3200 mm Capacity 3000 l Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Mixing System Spiral Product discharge Pneumatic dampers, front Mixer type Open Mixer Shafts amount Double Shaft
completely stainless steel Turn right-left double-walled (suitable for heating and cooling) Front emptying 2 motor: 2 x 3kW Safety cover Dimensions (L x W x H) : ± 1,500 x 1,200 x 1,700 mm + "Berief" Mobile feeding for 200L standard wagons
Producer: Servotech Description: Vacuum mixer Servotech - Capacity 340 l - Out put 240 kg/h -Total power 4,0 KW - Dimension; 1500mm x 800mm x 1300mm -Total weight 650 kg - Manual operation - one mixing and discharging gear - Top and discharging covers opened manualy - Machine fully made with s/s
