universal cnc milling used for sale

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

From business abandonment: We are selling a CNC portal milling machine with a working area of 3200 x 1510 x 300 mm It is used, but is well maintained and runs well. It was used to mill sheet material. Very good e.g. for wood, façade panels or Eternit cuts. It has 3 axes with rack and pinion drive Spindle: Air Cooled HF Spindle ES915 3.8KW S1 4.6KW S6 60% Ceramic/Steel Bearing With ISO30 collets (we supply with) ATC from HSD with Automatic Tool Changer (Air Driven) TOP: A complete replacement spindle is also included, freshly serviced with new bearings! The controller is an eding control on Windows PC, PC is included. A conversion of the Y-axis to 2 x12 Nm closed-loop stepper motor with very precise German Wittenstein gearboxes took place 5 years ago. X-axis runs with 9 NM stepper motor, Z axis too, also has a brake built in to hold the axle. Important and outsta ...

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

INFOTEC CNC machining center Model: 3121 3-axis Year of production: 2016 Dimensions of the machine working area for the axis X & Y: X: 2200mm Y: 3100mm Z-axis head travel: 250 mm Machine speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table

INFOTEC CNC machining center Model: 2515 5 axis Year of production: 2018 Dimensions of the working area of the machine for the X and Y axes: X 2100 mm Y 3100 mm Z-axis head stroke: 350 mm Machine Travel Speed X,Y.Z: X: 80m/min Y: 80m/min Z: 12m/min Vacuum table BECKER pump HITECO spindle with HSK 63F taper mounting

Calpe (5) station CNC lathe

- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...

The machine is in good technical condition, after prior agreement it is possible to test it. There is a complete manual in Czech and German. We also have a probe and accessories (vices, clamps, collets, mandrels, etc.)

- CNC wireless remote control - Zero-3 / 5-channel stepper motor drive - Base frame (movable on wheels) - Dell PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (Version 2.50) - Accessories

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm):  ...

Inv. Num. : 7446 Type: DYNAMIC FC 3000 CNC Producer: SAHOS Created: 2011 Parameters: Control system: HEIDENHAIN Spindle drive power: 18 kW X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1070 mm

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS  ...

This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information.

x-travel: 850 mm y-travel: 500 mm z-travel: 500 mm taper: ISO 40 P.D.B. table-size: 400x1250 mm volt: 400 V Control: Heidenhain TNC 355 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 500 mm z-travel: 600 mm taper: ISO 40 P.D.B. table-size: 500x1250 mm volt: 400 V Control: Heidenhain TNC 410MA total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition