| Description: |
D-CNC ROUTER MILLING MACHINE FRESATRICE CNC-STEP High-Z S-1000
new machine
Specifications / Technical Data S-1000
CNC-Router and
CNC-Engraver
This is the
biggest machine of our High-Z cnc-router series. With external
dimensions of approx. 1350x800mm it is still very handy.
With the High-Z 3D-cnc-routers you purchase an allround
talent in TÜV-certified quality. If you want to clampand fix complex
workpieces on the worksurface, or, or, or clamp work-pieces in a high
bench vise (the cnc-machine sits on a frame-construction, is driven by
2 motors and therefore allows to be positioned above a piece to be
processed).
Or if you simply want to do engraving-
or drillingjobs.you can work on a flat surface, with a pieces of sheet
MDF fixed to it. Plane it once and you will be able to work with a
precision of +-0,02 mm depth.
All cnc-machines are
being delivered with black energy-chains on all axis, which allows a
better cabling management. Also, all cnc-milling machines are equipped
with an emergency stop button. An additional emergency stop you find
in front of the controller.
Basic equipment of
all High-Z CNC-milling machines:
Software ConstruCAM-3D
limited ( from S-720 and S-400/T ) included
Contact free reference switch and emergency stop button as well as
22mm thick linear guide ways and individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment /
Productdetails:
oDrive : 4 stepping motor
by Nanotec with 1600 steps/rev (1/8 Step)
o2 motors for constant
tension and compression during milling operation on X-Axis
oFeed
through of long workpieces possible, because there's no belt drive at
the end of the X-axle
oGuide ways X and Y axle 22 mm / Z Axis
16mm, grinded and with 61hrc hardened surface
oBall bearings at
both sides of trapezium spindles Tr. 12x3 mm flank lead
oTraverse
speed of rapid feed: max. 2000 mm/min
oTechnical resolution:
0,00187 mm ( 1/8 Schritt )
oReversal error max.: +/- 30µm (
0,03mm )
oTable size / clamping area: 1330 x 680 mm
oTraverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm
oReference-
and limit switch on all axes
oDouble safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors:
L x W x H = appr. 1350 x 840 x 500mm
oMilling Motor anchorage:
Euroneck Ø43mm
oincl. Software WIN PCNC Light (optional WIN PCNC
Economy, USB or professional)
oincl. Software ConstruCAM-3D
limited ( recommended sell price full version 1902.81 EUR)
oModular frame for universal application
oWeight appr. 51 kg
oComplete machine Includet 4 driver microstep controller 4 x 3,5
Ampere
oAn approx. 30-minute long introduction during pick up
and an unlimted telephone support are included.
oAn approx.
2-3 hours long introduction and an installation of software on your
brought note-book / PC as well as a explanation of fundamental terms
of Corel Draw etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC engraving machine:
o
4-Channel Stepper motor -CNC-Controller with actual
SMD-Technology
o Main voltage 115 - 240 Volt / 47 - 63
Hz.
o Motor current 4 x 3,5 Ampere
o Microstep
controller Resolution C4444965 1/10-Step / 2000 Steps/Rev.
o
4 Connections for 4 brushless Motor / Stepper motor
o
Connection with parallel port and Software WIN PCNC Light, Economy or
USB with WIN PCNC USB or Profi version. ( Also
possible:
MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much other stepper
driver software.)
o "Sleep-Function" for controlling current
down
o Oszillation motor-Connection 24 Volt by PWM
controllable ( for example: Tangential knife ) or 24 Volt constant for
motor Break by ST-plug
o 2 relais for maximum 1200 Watt by
Software switchable (up from WIN PCNC Light), 230 Volt, max. 6,0 A /
Plug (for example Air compressor, cooling, exhaust, dust
extraction).
o 0 - 10 Volt for connecting a HF converter for
an high frequency spindle
o 12 Status-LEDs for monitoring all
important function (Power, Toggle, Move, X, Y, Z, C; Overheat,
Emergency stop, Relais: Spindle / Cooling, Short Circuit)
o
Connection possibility of 4 end- or. Reference switches and one
Emergency Stop switch
o Motor connection by D-Sub 9-pin.
(C-Axis: 15-pin.)
o Emergency-Stop Switch
o
Overheating protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805456
|