universal cnc milling used for sale

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

No. 4973: 1 gebr. Hydraulic unit 250 l / 60 bar / 40 l/min Fabr. UNIVERSAL Hydraulics, Bauj. 1987 with formerly HEYLIGENSTAEDT Heynumat 10 Arb.-Ber.: approx. 900 x 650 x 1500 mm, drive power: 5.5 kW Other: approx. 300kg (estimated)

Travel X-axis 1100 mm Travel Z-axis 360 mm Travel Y-axis 400 mm Table length: 1600 mm Table width: 360 mm Spindle taper: ISO 50 Main axle speed range: 32 – 1250 rpm. With vertical and chisel head accessories Year of manufacture: 1990 Cooling water system works. High-speed clutch burned out, to be renewed. Advance functions can be controlled manually.

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Manufacturer Universal piston filler 6 heads capacity 500 ml with dubble fill can do 1000ml

Manufacturer Universal 12 head servo control filling machine year 2016

The machine is Universal Pack from Italy, the machine is full automatic, with 2 tracks, with embossed paper stamping system, with 2 colors, the dimensions of the bust are variable, the amount of filling varies from 1 to 10 grams per bust. The machine is slightly used

Universal Pack Gamma-M5D Sachet Machine – 5 lane This machine has come direct from a closed sauce manufacturing company, was producing small sachets of barbecue sauce. 2015 machine with fillers for hot fill and cold fill.

Working width: 90inch, yarn count E: 10.

Working width: 2300mm, yarn count E: 8.

Yarn count: 10, nominal width: 90inch.

Technical details on demand.

Nominal width: 2500mm/ 96inch, yarn count E: 10.

Working width: 2290mm.

With accessories and documentation.

As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible.

- Software updated: 3.15.8 - Hours: 1280 - Working radius: 850 mm - Payload: 5kg Condition: very good, hardly any wear due to the low loads. Mainly used for measuring sensors in the laboratory. Circumference: - Robot with control panel and control - Folder with user manual - mobile, solid table

Used dissolver by UNIVERSAL - PASQUALE MORENO GENOVA. Description: - stirrer drive: electric - lifting of mixing column: hydraulic - adapted for screw feeder for dosing of loose semi-finished products - stainless steel INOX caddy, without drive - dispersing disc diameter: 25 cm - disc rotation: max 2800 / min 1400 rpm - dimensions of vat: 110 cm diameter x 100 cm height - DIMENSIONS (l x w x h): 2.10 x 1.10 x 1.70 h - power supply: 380/400V

Universal Roborts ,model, ur3 Serial number 2017332039 Year of manufacture 2017 with driven rollers Bannō Working width approx. 600 mm so security around the house Acrylic glass with aluminum frame belonging to a robot control Manufacturer Universal Roborts cb31ur3

feed pressure: 200 bar liter capacity: 250 l weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : Stephan Model: UM44 Year : 2001 Type : Cutter Application: mixing, reducing, cutting, kneading Total volume: 44 L Useful volume: max. 35 L Max. temperature: 95?C Drain: manual through lid or tilting. Power: 2.2 / 4 / 5.5 kW Dimensions (closed): 525 x 800 x 1200 Display: T?C / Time / Speed Documentation available.

Control Heidenhain TNC 407 Working routes x/y/z about 600 mm / 350 mm / 400 mm Spindle speed range 20 - 4,000 rpm Tool holder SK 40 Drive power 5.5 kW Power requirement about 12 kW Machine weight about 2.2 kW Dimensions width/depth/height about 3.44 m / 3.05m / 1.91 m Accessories: Touch system for digitization

Correa A16 X: 1800 - Y: 800 - Z: 800 mm CNC

Type: WF31SA Max longitudinal travel X-axe: 560 mm Max cross-travel Y-axe: 500 mm Max travel Z-axe: 400 mm Admission in boring head (ISO): ISO-40 Spindlespeeds: 4000 rpm Table size: 750 x 425 mm Control: Heidenhain Length: 2430 mm Depth : 2100 mm Height: 1855 mm Weight: 2 ton

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

FCQV 63 B CNC - TOS KUŘIM Table milling machine System: TNC 407 Warranty: 6 months Availability: 2 weeks from order We have the machine in stock FCQV 63 CNC B - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 5,900 mm Overall width: 3,600 mm Overall height: 3,400 mm Gross weight: 15,500 kg Number of places in the tool magazine: 40 pcs Total power consumption: 65 kVA Working range: X-axis longitudinal stroke 1,500 mm Transverse stroke of the Y axis 630 mm Vertical stroke Z axis 630 mm Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range continuously / 20 - 3,500 n / min Ex. spindle motor 27.4 kW Max. twisting mom. on the spindle. 1,000 Nm X - Y / Z feed range: Number of degrees / range continuously / 1 - 2,000 mm / min Rapid traverse 15,000 -15,000 / 10,000 mm / min  ...

Key data: 1250 mm, 1000 mm, 1000 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 125 P duoBlock NEW DMG Design With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 1250 Y 1000 Z 1000 Speed range: 0 - 18000 rpm ( HSK 63 ) With the following accessories: NC rotary table 1250 mm x 1000 mm clamping surface Universal milling head with controlled B axis Automatic swivel milling head 60 speed tool changer ( HSK 63 ) Full protection cabin with interior lighting Mode 3 + 4 3 D Probe Heidenhain TS 642 Electronic handwheel Spindle Oil Cooler IKZ 40 Bar Rotoclear Conveyor Oil mist extraction Coolant spray gun Control cabinet cooling unit (RITTAL) 3 Height-Adjustable Machine Shoes Operating instructions

Key data: 780 mm, 560 mm, 560 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMC 60 T With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 780 Y 560 Z 560 Speed range: 0 – 18,000 rpm infinitely variable With the following accessories: NC rotary table with 2-fold pallet changer 630 mm x 500 mm Vertical tool changer with 60 magazine slots Controlled milling head ( B axis ) IKZ 40 bar Conveyor Integrated screw conveyor Rotoclear Electronic handwheel Mode 3 + 4 Chip Sweeping Gun Full protection cabin with interior lighting 3-Piece Height-Adjustable Machine Shoes Operating instructions

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

MIKRON WF51C/150 universal cnc milling machine Numerical control: HEIDENHAIN TNC 155 Table (mm): 1000 x 500 Strokes (X x Y x Z): 800 x 500 x 460 mm Year: 1985

CNC Universal Milling Machine Make: Maho Type: 900 C Year of construction: 1981 (overhauled 2005) Control: 432 -Philips Travel: x-1000 mm y-550 mm z-650 mm Table size: 1250 x 700 mm Recording: ISO 40 Speeds: 40 – 2000 rpm Feeds x,y,z: 1 - 2000 mm/min Rapid traverse x,y,z: 6 m/min Weight: approx. 5500 kg

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Description CNC tool milling machine from DMG suitable for tooling, fixture construction, training as well as mold making Travel: 350x240x340mm Speed:20-6300rpm Technical data Year built / YOM 1999 Spindle speeds 20-6300rpm Steuerung / Control Siemens 810 D Shopmill Feeds 2-5000mm/min Table / Table 400x280mm Engine / Motor 5.5Kw Longitudinal / Travel (X,Y,Z) 350x240x340mm Machine Weight /Weight ca 1600kg Tool holder / Taper SK 40 Dimensions / Dimension 2000x2000x2000mm

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Type: DMU 60T Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 40 kW Admission in millinghead: SK40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton

Deckel Maho DMU50e DMU 50 Evolution Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 380 mm Power on spindle: 25/35 kW Type of millinghead: SK 40 Spindlespeeds: 20 > 18 000 rpm Table size: Ø 500 x 380 mm Control: Heidenhain Power needed: 38 kVa Length: 4000 mm Depth : 2500 mm Height: 2700 mm Weight: 5 ton Toolholder: yes Number of tools: 32 tools

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

DMG Deckel Maho DMU 60T X: 630 - Y: 560 - Z: 560 mm Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 10/15 kW Admission in millinghead: SK 40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton Toolholder: yes Number of tools: 24 tools

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

MSA BF5200 milling machine Strokes: 5000 x 1200 x 1500 mm CNC: TNC530 Automatic head Visible in operation

FADAL 6030 cnc milling machine FADAL 6030 Fadal 6030

FUW 710 x 250nbsp; Max longitudinal travel X-axe: 420 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Max height workpiece: 430 mm Power on spindle: 1,5 kW Admission in millinghead: ISO 40 Max quill travel Z´: 200 mm Spindlespeeds: 45 > 2240 rpm Table size: 710 x 250 mm Length: 1450 mm Depth : 1465 mm Height: 1750 mm Weight: 1300 kg

Travel XYZ 600x400x500 Weight 2500KG Recording ISO40

Fadal 4020 cnc milling machine year 1998 Fadal 4020