subcategories
(3rd category level)
Manufacturer:
(Category: 836)
- 4 head drilling machine - with the existing accessories
A nice condition Akebono paper strapping machine with floor trigger. Including 5 rolls of repro paper rolls.
Wire stapling machine with 2 stapling heads for 0-25mm stapling
Size: Equipments:Allows you to cover covers of max. A3 + format. The machine is equipped with work table illumination, cutter guillotine, edge folding module, vacum tableMax. Area (W x D) 750 × 476 mm.Max. bending length 750 mm.Max. dimensions of finished cover (closed) 352 × 455 (back) x20 mm.Thickness of cardboard cover 8 mmVoltage 220-240 V.Dimensions of the machine (W x D x H) 1000 x 780 × 210 mmWeight 43 kg
Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
number of heads: 4 serial no.: 92.847 bore diameter: 3-8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two inserting machines are available. 1) Grützmacher Rubin C5, max. mechanical output: 7500pieces/h, envelope format range: C6-C5, min. insert size: 99mm/148mm, max. insert size: 148mm/210mm, max. filling thickness: 5mm. 2) Bell and Howell CEXP-6RC, year of manufacture: 2006, max. mechanical output: approx. 10000cycles/h, envelope format range: C6-C5, max. insert dimensions X/Y: 110mm/220mm. Machine dimensions X/Y/Z: approx. 2200mm/950mm/1250mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.
Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.
- Standard model - for right side unloading - with existing accessories
Size: 800 x 1200 mmEquipments:Good condition without any damageMaximum stacking height: 1350 mmMinimum stacking height: 650 mmPlatform width: 1250 mm
used
HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE
Year of manufacture 1989 4 drilling spindles Adjustable drill spindle spacing electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.
Year of manufacture 1985 7 drilling spindles Adjustable drill spindle spacing incl. base electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.
VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)
Reference Num.: 4274Brand: BOBSTType: SP 142 CERConstruction year: 1995Available: directlyStatus: In productionLocation: Deutschland
Roby junior semi automatic casemaker suited for 3 piece cases format 50x70 cm light table for spine hot animal glue 2 sides turning in unit
IMA Double side label bundling machine made 2017 Used industrial equipment, lasting heavy duty equipment - rarely available. Upgrade recommendation: Sheet-fed rotary die-cutting machine „Heidelberg SORD-DC Available from Germany: immediately
Order- No.: 153-03 // Ser. No.: 1936 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105
Electronic cards for Schnieder Senator cutter built in 1990. Can ship worldwide.
Stago PB 5010 Age: 2009 4 Spindle Spindle distance 40-250 mm Drilling diameter 2 - 10 mm Drilling depth max. 60 mm Foot pedal automatical Sliding Table
Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.
