subcategories
(3rd category level)
Manufacturer:
(Category: 836)
Edge banding machine Sumbel Perkeo 150; Working width 150mm; suitable for cold glue. Edge gluing machine Sumbel Perkeo 150; workind width 150mm; used for cold glue.
Tünkers KBA 120 edge banding machine; cleaned and tested; Working width 120mm; suitable for cold glue. Edge gluing machine Tünkers KBA 120; cleaned and checked; working width 120mm; used for cold glue.
2x feeder units for the printing of envelopes. Includes CD and manual. Available immediately and in very good condition.
2 pieces of Akebono strapping machine from 2010 and 2014, both in production ready condition. Available immediately with repro material- paper rolls.
Size: Equipments:Dimensions and weight of the machine: 360 x 150 x 180 cm, 1800 kg
Paper drill Nagel Citoborma 290 AB Year of manufacture 2015 Art.Nr. L1131
Platform width: 900 mm Platform depth: 625 mm Load capacity: 500 kg Max. sheet size: 600 × 750 mm Max. stack height: 1200 mm Min. stack height: 540 mm - with airing
Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.
M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000
Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter
Max. size= 46 x 27 cm, Availability= 012026, Number of drill spindles: 4 Max. stack height (mm): 60 Feeder table width (mm): 460 Feeder table depth (mm): 270 Drill diameter (mm): 2 – 35 Drill spindle spacing (mm): 19 – 425 Drill speed: 2-stage Time per work cycle (sec): 3.3 Automatic hub Power supply: 400 V 50 Hz three-phase current Output (kW): 1.8 H x W x D, net (cm): 139 x 71 x 77 Weight, net (kg): 265LOT Loaded in truck or container
Size: 0x0Equipments:Toggle press for beech corners, 40 mm stroke, 73 mm throat depth
Size: 100x140 cmEquipments:Max. Load capacity: 1000 kg
Designed for closing Wire-O® bindings up to 430 mm in width. This unit is not equipped with a hanger feeder and is therefore not suitable for calendar production with hangers. However, this machine is perfectly suited for the production of books and other Wire-O® bound documents. Includes a complete set of closing tools for all common Wire-O® sizes (2:1 and 3:1). Technical specifications: Max. binding width: 430 mm Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch) Output: up to 1,000 books/hour Operation: semi-automatic No calendar hanger feeder included Includes full set of closing tools Power: 230 V / 50 Hz / 3 A
Cyklop DTM 22 electric tape dispencer - on a trolley - two tape length can be pre-set - cuts and wets the tape automatically - Including +/- 50 reels of 70mm wide tape
2 x Audion Elektro Sealboy working width 26 cm one of them has a knife to cut the foil for working with tube foil from the roll 1 x tube foil 250 mm width
Haug AG35 generator charging unit for making products static or antistatic See soecificationa in the pictures
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
Morgana Autocreaser 33 year: paperweights: 70-400 grams Vacuum autofeed with alignment 16 creases per sheet 9 programs max size: 730 x 330 mm min size: 160x140 mm
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
