post press: other used for sale (794)

M. No.: 3704 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Size: 500 x 350 mmEquipments:Accumulate & Folder ACF-30 (serial 381007)Stacker ST-40 (serial 409107)4x Collator VAC-600HaThree knife trimmer HTS-30S (serial 632003)Saddle stitcher SPF-30S (serial 632003)

Size: 760 x 1.060 mmImpression: 8 Mio.Equipments:Bogenformat min.: 300 x 350 mmBogenformat max.: 760 x 1.060 mmMaximum machine speed: 8,000 Bg/hMaximum punching pressure: 2.6 MN / 260 tMaterials and stacking height (including pallet)Paper min.: 90 g/qm2Cardboard / solid cardboard max.: 2,000 g/m2Corrugated cardboard max.: 4.0 mmHeight of investor stacks:Without non-stop max.: 1,500 mmMaximum continuous operation: 1,200 mmMaximum weight of stack of feeders: 1,500 kgWithout a utility separation stationWithout MasterSet

- Banding machine - desk model

NM 414 Grooving Machine Heavy-duty grooving machine for manual operation, designed for grooving cardboard from 0.6 to 4 mm using the compression-bending principle. Coupling-free drive controlled by a frequency converter Built-in piece counter Thanks to an innovative drive concept, grooving is performed in a single stroke Working width: 440 mm Groove width adjustable from 4–12 mm Front work table 45 cm long with 2 scaled T-slots and 2 guide rails Rear work table with belt discharge Grooving on the top or bottom side depending on the tool’s mounting position Power rating: 1 kW, 3-phase 400 V Standard configuration: Grooving tool with movable bending jaws and height-adjustable grooving blade. Very good, like-new condition

Size: 166 x 211 mmEquipments:Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, ticketsST-18.02 Strip stock feederSE-18.2 Infeed and Cross Cutter with Automatic ProgramD-18 Die Cutting Punch Unit with 2 chasesPB-18.1 Banding machine with deliveryStrip length min./max. : 350/1130 mmStrip width min./max. : 45/180 mmPrecut label size min. : 25x45 mmPrecut label size max. : 150x180 mmDie cut size min. : 20x41 mmDie cut size max. : 145x175 mmStack heigh min./max. : 45x125 mmMin. trim per side for die cut : 2 mmIntermediate trim cut : 3 mm / 22 mmHeight of cutting die : 60 - 100 mmMecanical Speed : 10 - 15 strokes per minuteDie Cut Pressure : 4 - 5 TonsBanding machine, width : 25 mmMachine is controled with program and screenElecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp.Air supply required : 6 bars dry air (30 - 45 m3/h) incl. 30% reserveDimensions ...

Size: 320 × 550 mmEquipments:Sheet feeder:Two drum feeders with gripper systemBelt conveyor channel for product conveyingSurface with rice paper structure to protect the productFront stop made of aluminumSide guides with sorting screws for sheet positioningScrew ejector for precise bow positioningSheet control system:Double sheet inspection using mechanical thickness measurementMisaligned bow detection using photocellPhotocell-controlled activation of the second feeder and glue injection timingGlue unit:Hot melt or cold glue application (configurable)Glue injector with digital keyboard settingDelivery:Double roller press station for optimal adhesionInclined conveyor belt for shingled product stacking at the exitControl system:SPS control unitTouchscreen control panelSafety system with light barriersTechnical data:Min. Format 100 × 150 mmMax. Format 320 × 550 mmMax. sheet thickness 5 m ...

Size: 0x0

Size: 0x0

Size: 1360 x 1200 mmEquipments:Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hrAutomatic Palletizingproduct infeed via accumulating conveyorPallet dimensions: 1360 x 1200 - 1000 x 800travel stop for dropping of very smooth productspallet removal in moving directionPallet sizes 1,360 x 1,200 or 1,000 x 800mmSpeed 30 Stacks/min

BOSTON 4 head flat and saddle stitching machine double wire

BOSTON 4 head flat and saddle stitching machine double wire

with original HDM hot foil stamping device

with original HDM hot foil stamping device

Pitney & Bowes envelope feeder, model DI 380, serviced, clean and tested. Available immediately.

Melton hotmelt adhesive appllicating system.

Inserting Machine Neopost (Quadient) DS200 Configuration: Inserting System DS-200 Tower Feeder 2 with reading Inserts Hatchet feeding with reading Storage Tape Fsbrqbgjyttidsv Iofw Machine permanently in maintenance contract until 31.1.2026 ! Last machine maintenance in 12/2025 ! Little walked.

Eyelet machine Piccolo for sale Sell a Piccolo eyelet machine in good, working condition. Ideal for inserting eyelets in paper, cardboard, leather or plastic. Easy hand operation and stable design. Inspection and test possible.

HS Heiber + Schroeder WP 11 D - window patching year 1991 in production good condition

Condition: Very good condition

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; used for cold glue.

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Bielomatic Collator Year : 1991 5 stations, dual-purpose Gluing Unit HHS crimping and Multiflex on both sides Numbering: yes

2x Hohner stitching heads for omega loop. In excellent condition. For Duplo and Horizon booklet makers, etc.

Envelope inserting machine Pitney Bowes Di 830, envelop format: min: 88 x 220 mm, max: 164 x 242 mm, max 3000 cycles per hour, very good condition, well maintained and in production ready condition.

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.

semi-automatic packaging aid for folder-gluers, boxes, folded flat: max. 400 mm, min. 50 mm, length of the boxes: max. 500 mm, min. 100 mm, standard, right-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, box types: ordinary folding boxes 4+6 dot boxes, with or without lid. Overhaul 2025: cleaned, checked, painted, new belts and belts

Camera module, max. passage width 650mm, max. 420mm camera scan width, own drive with servo motor, vacuum transport belt at the top, module length 800mm, order evaluation and documentation, connection to HHS quality assurance system possible.