pharmaceutical machines used for sale

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Reference ID PP-53278 Category Flatbed Die Cutter Manufacturer Wook Model WTNS-2500 SF Year Built 2008 Color- Impression- Working Hours - Speed 1600 sheets/h Max. size 2500 x 1500 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Maximum die-cutting pressure: 600 tons Power supply: 400V, 50Hz Prefeeder, fully automatic Brand: HF technology Model: MFS 2500 HBL, Model 2516 Maximum sheet size: 2500 x 1650 mm Minimum sheet size: 600 x 450 mm Maximum speed: 13,200 sheets/hour Maximum stack height: 2400 mm (minimum 500 mm) Maximum stack weight: 2000 kg Power supply: 400V, 50Hz Year of manufacture: 2011

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Size Max 76 x 106 Size Min 450 x 450 mm cardboard thickness 250-2000 gr/m2 Max corrugated thickness 5 mm Speed 6000 sh/h Pressure 300 tonn

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.

Modular built semi-automatic twist wrapping machine Product dimensions: Width: 50 - 730 mm Height: 20 - 520 mm Length: 750 mm to infinity Maximum diagonal: 730 mm Packing materials: PE stretch film, VCI stretch film PE film, crepe paper, etc. Width: up to 250 mm Core average: 76 mm Very good condition!

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Used blow moulding machine made by SIPA model SFR24. New 2007. It has 24 blow stations. The maximum blow speed is 38,000 bottles per hour for the 1.75 l format and 41,000 bottles per hour for the 1.5 l, 1.25 l, 1.0 l and 0.7 l formats. The device has an air recovery system and linear optical control for testing the quality of preforms. Supported thread type: PCO 1881. The blow moulding machine has an integrated control system with visualisation in Polish, English and Italian. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic air-cooled chiller for supplying the machine with cooling water, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air conveyor.

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Bessler - Wood Milling Machine Speed in 18mm Koskisen Grey consisting of a router table (X-axis), a portal (Y-axis), a Z-axis and a base frame filled with polymer concrete. Mechanics set: consisting of profile guides KPF-S 20 incl. carriage. Ball screw, for the Z-axis. Precision racks, with a gearing quality 8. Profile rails for the installation of limit switches. All sub-elements assembled. Machine feet adjustable. Control set: consisting of planetary gears, with a reduction ratio of 1:5 Stepper motors with 9.2NM, 4A. High-performance power amplifiers with 80V each, a 70V power supply and core transformer, completely pre-assembled in the control cabinet. Sensors for each axis. Protective device CE-compliant due to moving suction device. High-frequency spindle with 2.2KW incl. union nut, frequency converter, mains filter, brake resistor, as well as collet set. 21.5 ...

DESCO GA S1600 film packaging machine – fully automatic packaging solution for insulating panels For sale is a DESCO GA S1600 film packaging machine from the German manufacturer DESCO Maschinenfabrik GmbH, Langen/Hesse. This machine is designed for fully automatic packaging of stacks of insulating boards and large-format products in PE film – ideal for use in the insulation, construction or packaging industries. ⚙️ Specifications Manufacturer: DESCO Maschinenfabrik GmbH Type: GA S1600 Voltage: 230/400 V, 50 Hz Compressed air connection: 6 bar Sealing bar length: 1600 mm Max. film width: 1500 mm Package size: Length: up to 3000 mm Width: up to 1500 mm Height: up to approx. 500 mm Conveyor belt speed: approx. 25 m/min Equipment & Features Fully automatic film packaging with motorized insertion device Two slide-in plates with return  ...

Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Kemper Langwirker-I-L

The machine originates from a high-profile pharmaceutical & cosmetic manufacturing plant (part of a large Pharma group that operates 18 industrial sites and 3 development centres located across Europe). Year: 2008 Excellent condition with little use. 3M-Matic™ Adjustable Case Sealer 700a-s is as a used case sealer, designed to seal the top and bottom centre seams of up to 30 cartons per minute. Working Description: Fully guarded construction-suitable for demanding Pharmaceutical and Food grade manufacturing areas Stainless steel construction for use in corrosive and high moisture environments Equipped with 3M™ AccuGlide™ SST Taping Heads designed to apply a C” clip of Scotch® pressure-sensitive type film box sealing tape to the top and bottom centre seam of regular slotted containers. Adjustable top and bottom belt drive syst ...

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

TECHNICAL SPECIFICATIONS Manufacturer: August Müller Rottweil (AMR) Description: Finger roller grate Type: Stationary Type: 11-F2-5/15 Year of Make: 2019 Slope: 11° Power: 3 x 22 kW / 400V Number of rotary shafts: 15 pieces Max. feed capacity: 150 - 250 t/h Max. drop height on the finger roller grate: 2000 mm Max. size of the feed material: 0 - 120 mm Sieving: 0 - 25 mm Weight: 16,000 kg Max. external dimensions (L/W/H): 5800mm x 2950mm x 2550mm SPECIFIC COMMENT - Plant has only been in operation for about 3 years - Processing of heavily contaminated screening waste - Spinning, equalization and cleaning of the feed material - Dismantling and loading included in the offer

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

ALPHA Q 351 PROGRESS PULS MM WLG FD • Year 2016 • Inverter welding machine, DC, pulse, water-cooled • Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging • Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder Excellent Multimatrix welding characteristics • Equipped with Synergic characteristics for EWM coldArc, EWM coldArc puls, EWM pipeSolution, EWM forceArc, EWM forceArc puls, EWM rootArc, EWM rootArc puls and superPuls • Adjustable start and end-crater functions • Program operation with 16 programs per JOB • Equipped with Synergic characteristics for GMAW welding of steel/CrNi/aluminium • Infinitely adjustable arc dynamics (choke effect) • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use •  ...

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

GLUE APPLICATOR Manufactured by FISHER+RÜCKLE Model: Gluemate

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728

DATASHEET – RAMO TN20 CNC LATHE Manufacturer: RAMO Industrie SA Model: TN20 Numerical control: NUM 1060 (Telemechanical) Type: Inclined Bench CNC Lathe Condition: Good general condition, visible machine under power ⚙️ TECHNICAL SPECIFICATIONS Power supply: 3 × 400 V – 50 Hz Current rating: 63 A Control voltage: 110 V ~ Signaling voltage: 110 V ~ Lighting voltage: 220 V ~ Clutch voltage: 24 V = MECHANICAL CAPACITIES (TN20 standard) Turning diameter above the bed: 420 mm Turning diameter above carriage: 250 mm Length between toes: 500 mm Z-axis travel: 500 mm X-axis travel: 200 mm Spindle passage: Ø 40 mm Spindle speed: 30 to 4000 rpm Spindle Cone: Camlock D1-4 Spindle motor power: 7.5 kW Fast feeds: 10 m/min (X and Z axis) Tool Turret: 8 automatic positions DIMENSIONS AND WEIGHT Dimensions (W × D × H): app ...

DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year / Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 2l .5 ERGOline Control with multi-touch screen CNC Laser Precision Machine with High Speed Machining LASERTEC 50 FineCutting for laser fine cutting, laser drilling, laser welding NC swivel rotary table highly dynamic and precise Travel: 500 mm x 500 mm x 700 mm travel integrated ytterbium cw fiber laser 450W qcw ytterbium fiber laser with 4500W Pulse peak power and 450 W power Processing head (80 mm focal length), 5-axis transformation 100 working hours (new-new) Kaufpreis neu/Buying price in year 2020: 890.000,- Eur, Made in DMG Germany. Included: Fanuc robot automation + Keller autom. Extraction system solid machine base frame made of mineral casting, Camera through optical path for fib ...

Working Length: 3300 mm

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Working Length: 3100 or 4100

Intact Vacuum skin packer Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Key data: 40 , 200 , 1340

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

Key data: 340 mm, 1000 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...

KRONEN AS 4 APPLE PEELING, CORING AND CUTTING MACHINE Manufacturer: KRONEN Model: AS 4 Year: 2017 Serial no.: 175012 Multipurpose semiautomatic apple processing machine designed to peel, core and cut apples into segments and slices of different sizes (depending on the cutting accessories that are used). It is capable of processing up to 3 apples at the same time. Made of stainless steel Max. capacity: 600 apples/hour (approx. 90 kg/h) Apple size: Ø 55 - 85 mm Electrical data: 230 V/50 Hz/0.18 kW/1PH Overall dimensions (mm): 300 x 660 x 400 (WxLxH) Weight: 35 kg The following cutting accessories are included: - Ø 23 mm corer - Blades for cutting into 10 and 24 segments

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Stainless swing top vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph

Rego SM4 Stroke Machine Stirring Machine for 40 Liters For sale is a Rego SM4 stirring and stirring machine, a robust and powerful device for bakers. The machine is ideal for whipping and stirring various creams and light doughs. Rego SM4 Stroke and Stirring Machine - Manufacturer: Rego Herlitzius - Model: SM4 - for mixing, kneading, beating and stirring a wide variety of masses (e.g. doughs, creams, shames, etc.) - for a maximum of 40 litres - Speed adjustable - 2 working functions, stirring or beating - Boiler lighting - With EMERGENCY stop button - incl. 2 whisks + 1 kettle Technical data and dimensions: - Connection 400V, 16A plug - Power: 1.6 kW - Dimensions: 720 x 680 x 1710 mm, WxDxH - Weight approx. 285 kg The machine can be visited and tested by appointment. More information and pictures as well as delivery on request.