other machinery for waste disposal and recycling used for sale (414)

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

FRICTION WASHER for ground plastics, Stainless steel housing with mild steel reinforcements, Rotor diameter 560 mm, Screen diameter 600 mm, Screen length 3.000 mm, Drive 30 kW, Conveying plates are bolted on the rotors paddles and can be easily replaced, over dimensioned outer bearings; on top and bottom with efficient seals to avoid water leaking., bolted, replaceable screen, with 4 mm.Ø holes, stainless steel feed - and discharge hoppers for plastic flakes,, material discharge from top, waste water discharge at the bottom, possible mechanical filtration with a [vibrating screen](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule), This system allows to quickly wash lightly contaminated plastic flakes or to rinse them after previous washing. Low water consumption (reusable after filtration)

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - / Contact us at -

1 piece used separator Manufacturer: TiTech Type Titech AutoSort [NIR1-VIS] [S-2000] [X-H] including acceleration band Conveyor width approx. 2,000 mm AA approx. 5,000 mm

Fe separator, overbelt magnet. Overall dimensions with gearbox LxWxH: 2950x1800x550 mm Rubber belt width: 1280 mm Magnetic core dimensions LxWxH: 1580x1150x300 mm Total weight approx. 3500 kg Motor/gearbox: SEW ,power 2.2 kW Machine checked, ready for immediate use Base Available, dimensions approx. LxWxH 3100x2800x6000 mm

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

Year 2004 17000 hours Very good condition Find more here - / Contact us at -

Specifications Strip width: 500 mm Distance between side walls: 5 m Length: 40 mm Power connection: 0.75kW Threshold height: every approx. 400mm Motor power: 400V Threshold spacing: 550 mm

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

Manufacturer: Vecoplan Model: 45/12/2 v Year of Manufacture: 1979 Rotor speed: 680 Gauge size: 98 Condition: Used, good condition Find more here - / Contact us at -

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - / Contact us at -

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: ATM Type of Machine: Scrap Baler 40x40 Year of Manufacture: 2013 Find more here - / Contact us at -

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Modular Recovery Plant for PCB Recycling The modular recovery plant, in operation since the second quarter of 2016, is based on a proven process for efficiently recovering valuable metals. The process begins with the shredding of 80 tons of PCB boards, which are then sorted into different material fractions. At this stage, plastics and aluminum are removed, while non-ferrous metals (NE), ferrous metals (FE), and flakes are prepared for further processing. These materials then undergo two sequential furnace steps, where they are heated and processed. During this thermal treatment, slag is formed as a byproduct, along with copper-bearing material, which is directed to the metal recovery stages. Metal recovery is carried out in several steps. Through the anode process, lead and silver are separated, while electrolysis is used to extract copper. In the final stage, a smelting process is a ...

Technical specification, FGR S1 FGR M1 FGR L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 400 mm ROTOR LENGTH 800 mm ROTOR LENGTH 1200 mm, BLADE 7+2 BLADE 14+4 BLADE 21+6, LENGTH 800mm LENGTH 1200mm LENGTH 1600mm, WIDTH 1400mm WIDTH 1480mm WIDTH 1580mm, HEIGHT 2000mm HEIGHT 2000mm HEIGHT 2000mm, fine mills, Mizar Machines mills offer high performance in industrial waste processing and recycling processes. These mills are designed for efficient grinding and granulation of various materials. With their superior crushing capacity and fast processing times, they can effectively process even challenging materials such as metal cables, plastics and electronic waste. The use of durable materials and wear-resistant blades ensures long-lasting and reliable performance. By prioritiz ...

conveyor belt, The conveyor belt is an important piece of equipment in various industrial applications, designed to efficiently transport materials through different stages of production and processing. Thanks to its robust construction and customizable design, this conveyor system can transport a wide range of materials, from bulk materials to packaged products., With adjustable speed settings and multiple width options, the conveyor can be customized to meet specific operational requirements. Smooth and continuous operation minimizes product damage and ensures safe and efficient material transport. In addition, the modular design allows for easy integration into existing production lines, improving the overall workflow., Safety is a priority, and the conveyor is equipped with features such as emergency stop buttons and guards to ensure a safe working environment, making it an ideal sol ...

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: GROSS Model : Z7400 Year of Manufacture: 2001 Type of Machine: Briquetting machine Power Output: 7.5 kW Nominal Voltage: 400 V Rated Current: 30 A Control Voltage: 30/24/211 V Fuse Protection: 10 A Hydraulic Operating Pressure: 280 bar Frequency: 50 Hz Operating hours are estimated at less than 100 hours and it also includes an unused 10,000 l oil tank. Find more here - / Contact us at -

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - / Contact us at -

Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -

Manufacturer: Polytechnik Model: FR 250 II Year of Manufacture: 1993 Type of Machine: Boiler System Nominal Power, Wood Chips; 215.000 kcal/h Equivalent Power: 250 kW Capacity : 900 l Max Operating Pressure .: 6 bar Test Pressure : 9 bar Max Flow Temperature : 90 °C Find more here - / Contact us at -