subcategories
(3rd category level)
Manufacturer:
(Category: 505)
Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.
used mobile scrap shears 400 t shear force, 8-12 t throughput, drive by completely overhauled Perkins diesel engine 90 kW, simple Tier III engine with common rail, mount with hook vehicle. Weight 25 t. Shear is professionally overhauled and ready for operation, future spare parts supply and service is ensured. 6 months warranty.
Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va
TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck
used
Several different machine frames made of steel are offered. Partly with controls, control cabinets, ladders, stairs, protective grilles, Engines equipped. Racks can be dismantled and transported away on site.
External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm
Our company provide a Lefort C850T machine with complet refurbishment. The machine is a full extra machine has the following extras: -Full Tunner pusher -Window crosshead -Soft started -Oil Heater -Pre-feeder -Central Greasing system For our refurbishment we provide warranty, and man power for the assembling and commisioning. The Estimated delivery time will be end of May. In case of need, we can provide platform and cabin for the customer. Technical details: Cutting force:850T Hold down force:200T Pusher force: 120T Open Box Section: 8000x2400x1000 mm Closed Box Section:8000x1000x700 mm Lid cylinders: 4x175T Power Source: 2X182Kw Electric engine Own Weight:150T And what we done on the machine? Just a few examples: -Complet refurbishment of the shear head -At the box we changed: -- Wear plates in 4 sides -- Hinges -- 4 New lid cylinder completly -Complet Refurbishment of all pumps -Recon ...
Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!
Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!
Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!
Schuko bagging level filter type SPA 57 sqm filter area Motorized filter cleaning All-weather fairing
Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!
For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.
used webbing conveyor belt Manufacturer: SUTCO Type: RGF GB 1400 Year of construction: 2016 Specifications: Conveying width: approx. 1,400 mm Centre distance: approx. 9,620 mm Path length: approx. 5,061 mm Gooseneck: yes Drive power: 2.2 kW
Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition
3.6kW 3000m³/h 4200 PA as good as new
Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h
High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions
Suction fan Slow runners D= 350mm Air capacity 6250m³/h
used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm
INTENSIVE Nozzle Filter JC 20/1-2 BS 22.6 Filter Area Attachment filter without funnel 20 baskets ø 160 x 2250, control unit S 6022-220 V Diaphragm and solenoid valves new, filter bags new Housing approx. 1.35 m x 1.35 m x 3 m Space requirement horizontally to change hose approx. 1.8 m
used optical sorting device Manufacturer: TiTech Type: PolySort 1000 Serial No.: X092M, A551003-00
used optical sorting device Manufacturer: TiTech Type: PolySort 1400 Serial-No.: X148T, A551004-00
Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors
used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW
Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!
used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE
HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2 ...
agicom-pedergnana OG
