With the compact Kabelschäler MAXI 100 can cable Ã? 6 mm up to 90 mm are processed. The cable insulation is cut by the proven two blade system and the copper or aluminum core can be easily removed. The machine is infinitely adjustable via a hand crank on all cable diameter. The cutting depth of the blade (sheath) is also adjustable, allowing the processing of different cable types (E.g. triangle veins from high power cable, cables with lead coat...) Complete intrusion protection, foot switch, modern design New: with introducer channel Technical data: Diameter cable: 6 mm to 90 mm Number of blades: 2 Cutting speed: approx. 22 m / min Propulsion: 2 electric motors, 2 x 1.1 kW / 380V 50 Hz Dimensions: L B 1850 x 760 x h. 1200 mm Weight: approx. 240 kg
Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables
The "MASTER 140" cable peeling machine is suitable for peeling VPE cables, underground cables, steel-reinforced cables, aluminium and lead-reinforcement cables, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one knife, the "Master 140" cuts simultaneously with two knives – so you may save an additional pass. Spreader wedges can be screwed on to push the cable halves apart. Both knives can be individually adjusted to the desired cutting depth. Due to concave pull rollers, the cables are squeezed less on the cutting surfaces, cores made of (lead) encased cables can be removed better. Technical data: Working range/cable diameter: 30 mm to 150 mm Transit speed: max. 12 m/min Engine: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg
Dear Sir or Madam, we offer a refurbished ELDAN M 6. The machine is currently undergoing an overhaul in our workshop. In a few days the original pictures will follow. Producer: ELDAN Type: M 6 Electric motor/Drive electric motor : 11 Kw / 400 V Diameter range/Diametre cable: 25 - 160 mm Cutting speed 34 metres per minute Weight/Full weight approx. 1500 kg Heavy peeling machine for iron and lead alloyed cables. Just ask. We will be happy to advise you. There are other cable cutting machines in stock. Your Diebels recycling machines team.
Ready to go GUILLOTINE REEL SPLITTER Working width 1.500 mm Working height 1.250 mm Cutting force 1x30 Ton. icreased speed system, doubles production energy saving system 7,5 Kw drive 400V 50 Hz With Knife protection, hydraulic locking system, pull rope emergency system, protection grids complete with control panel top lodging, space saving for hydraulic pack User's manuals, drawings, CE compliance
McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.
DEMONSTRATION DEVICE 2020 Table cable peeler JUNIOR 25: easy adjustment and operation, two knife cutting system
With the compact MAXI 100 cable peeling machine, cable diameters from 6 to a maximum of 90 mm can be processed. Thanks to the proven two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed. The machine is infinitely adjustable to all cable diameters via a hand crank. The cutting depth of the knives (cable jacket) is also adjustable and thus allows the processing of various cable types (e.g. triangular wires made of high-voltage cables, cables with lead jacket ...) All-round intervention protection, foot switch, modern design New: With insertion channel
This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg
This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.
Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm
Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
The mulcher is used to recover iron and aluminium from high-voltage power lines. Via the adjustable feed system, the cable is routed to the special cutting rotor and cut piecemeal. Cable diameter (from 10-50 mm) and feed speed are adjustable. The still mixed process material (Al+Fe) falls on the discharge belt and is separated into iron and aluminium via an integrated head roller magnet. Specifications: Cable cross-sections: Ø 10 - 50 mm Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Power consumption: approx. 31 kW / 380 V Weight: approx. 3,500 kg